lathes used for sale (3,037)

7 axes Max. spindle passage: Ø 16 mm Max. headstock stroke: 205 mm MAIN SPINDLE Spindle speed: 10000 1/min Spindle drive power: 3.7 kW Minimum C-axis resolution : 0.001 [degrees] SUB-SPINDLE - Max. rod end Ø: 16 mm - Spindle speed : 9000 1/min - Minimum resolution C-axis : 0.001 [degrees] TOOLS 5x Turning tool holder on linear slide 4x drilling unit incl. drilling holders (front/rear) 3x driven tools for transverse machining on linear slides 4x tools incl. drill holders for reverse side machining Driven Tools Speed : 7500 1/min Conveyor Bar Feeder FMB minimag 18/3200

turning diameter over bed: 360 mmturning diameter over slide rest: . mmturning length: 750 mm3-jaw chuck: Durchmesser 160 mm tail stock: Multifix lighting: turning speeds: max. 2500 U/minquick change tool holder: System Accessories and cabinets can be purchased optionallyThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software so ...

faceplate diameter: 1250 mmswing diameter: 1450 mmturning height: 1200 mmslide adjustment: 800 mmside head - cross travel: 600 mmdigital readout: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 650 mmturning length: 2000 mmturning diameter over slide: 260 mmHolder Multifix: control: Siemens type: Sinumerik tailstock quill taper MT: 5 transmission ratio: 2 turning speeds: 1-2000 U/minspindle bore: 106 mmtotal power requirement: 38 KWweight of the machine ca.: tdimensions of the machine ca.: 7,4x2,5x2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 65 mm

CNC Turning and Milling Center CNC lathe used CNC universal lathe Manufacturer: Traub Type: TNA 300 Year of Make: 1996 Spindle ø 65mm Tailstock Powered tools Conveyor Control TX8H FlexIPS Collet chuck with collets from 5mm to 65mm Three-jaw chuck Various tool holders fixed, rotating and angle-rotating Etc... incl. bar loading magazine Traub DNH 61 3000, year of construction 1996 incl. many accessories! Location of the machine: Nahe 93047 Regensburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

CNC lathe Okuma Genos L200E-M with gantry Control: OSP-200LA-R Year of manufacture: 10/2012 max. turning length 380 mm Turning diameter 200 mm Turning diameter over bed 450 mm Spindle speed: 107 - 4,500 rpm Spindle passage: 66 mm Turret: M-V12 (VDI) Speed tools: 50 - 6,000 rpm Rapid traverse m/min: X: 20 / Z: 25 Accessories/Equipment - Gantry loader type ATPGR-03 workpiece dimensions Ø 20 - 150 mm, workpiece weight max. 2 x 3 kg (Double Gripper) for OKUMA Genos L200E-M -Conveyor - Touchsetter - Hydraulic tailstock -Coolant pump - Tool package

max rod Ø: 20 mm Turning length: 350 mm Turning diameter over bed: 240 mm Speed: 23-4400 1/min 6-station turret 2 longitudinal slides 2 cross slides IEMCA Bar Feeder BOSS 432/32 max. bar length 3,200 mm

max rod Ø: 20 mm Turning length: 350 mm Turning diameter over bed: 240 mm Speed: 23-4400 1/min 6-station turret 2 longitudinal slides 2 cross slides IEMCA Bar Feeder BOSS 432/32 max. bar length 3,200 mm

6 spindles Tapping Slotting tool Peeling tool holder Pick-up device lots of accessories with bar feeder IEMCA PRA 40/31 P (3m - poles)

GENERAL Project No.: 905722 Quantity: 1 pcs. Manufacturer: MORI SEIKI Type: SL 2500 Y/650 Control: MSG-805 L MAPPS Year of Make: 2003 Condition: Used machine DESCRIPTION TURN Max. turning diameter 356 mm Max. turning length 655 mm Max. circumferential diameter over bed 520 mm Max. rotation diameter over face slide 250 mm Max. circumferential diameter over bed cover 755 mm Max. speed main spindle 4500 1/min Max. power main spindle at ED 10-40/100% 18 kW Spindle passage main spindle 75 mm Spindle Flange Size Main Spindle A2-8 Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Tailstock NC-controlled 1 turret on top Number of stations/powered by 12/12 Speed tool drive 6000 1/min Axles in the turret X/Y/Z Travel in X/Y/Z 160/120/590 mm Max. rapid traverse speed in X/Y/Z 18/-/24 m/min OTHER EQUIPMENT Tool life monitoring Spla ...

faceplate diameter: 1600 mmswing diameter: 2000 mmturning height: 1600 mmControl: Siemens Sinumerik 805 turning speeds: 1-250 U/minTable load: 12000 kgControl system manufacturer Siemens type Sinumerik 805Accessories and cabinets can be purchased optionallyThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoT ...

faceplate diameter: 5000 mmswing diameter: 6000 mmturning height: 2300 mmcontrol: Siemens type: Sinumerik840D mm0: 55 kWtable load: 55 tRest: 2 Drehsupporte ram head dimension: 340x340 mmTable load: 55000 kgturning speeds: 280 U/minchip conveyor: new control Siemens type Sinumerik 840D in 2015Accessories and cabinets can be purchased optionallyThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus  ...

with UniRobot FMB Control: SIEMENS 828D Circulation over bed: Ø 540 mm Circulation via face slide: Ø 360 mm Spindle – tailstock: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel distances: X= 210, Z= 610 mm Max. chuck size: Ø 254 mm Main spindle: 15/18 kW (100%, 60% ED) Speed range: 60 – 4200 rpm infinitely variable Max. torque: 192 NM C-axis Rapid Traverse: 1000 rpm TOOL TURRET 12 stations all powered Recording: VDI 30 Speed range: 0-5000 rpm Max. drive power: 5 kW Max. torque: 20 Nm Automatic tailstock, hydraulic Travel: 500 mm Inner cone: MK 4 Robot Cell FMB MH5L-XP With robot Yaskawa Motoman MH 5 L Max. load capacity: 5 kg Max. working radius: 895 mm Weight: 27 kg Workspace: S-axis (rotation): -170° ~ +170° L-axis (forearm): -65° ~ +150° U-axis (upper arm): -138° ~ +255° R-axis (ha ...

6 spindles Tapping Cross drilling Thread Rollers Milling apparatus a lot of accessories Feed motor (spindles) defective! with bar feeder IEMCA PRA 40/32 P

turning diameter: 1000 mmturning length: 4000 mmturning diameter over bed slide: 680 turning speeds: 0 - 1400 U/mincontrol: Siemens 810 D tool turret - number of stations: 2 centre distance: 4000 mmdrive motor: 30/37 kWTorque: 4140 Nmbed width: 550 mmmax. workpiece weight between centres: 4800 kgmax.workpiece weight:each extra steadyrest: 700 kgspindle diameter in front bearing: 150 mmspindle bore: 104 mmtotal power requirement: - kWweight of the machine ca.: 12 tdimensions of the machine ca.: 7 x 2,8 x 2,16 mequipped with:- CNC control Siemens 810D ShopTurn- jaw chuck- steady rest- 2-fold steel holder23500h switch-on hours, 9300h spindle running hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 290 mmturning length: 204 mmcontrol: Fanuc 31i - Model B Number of working hours: 5149 + 4185 hnumber of spindles: 2 Stückspindle turning speed range: max. 3200 U/minx-travel: 230 mmz-travel: 250 mmdistance between the spindle noses: 450 mmspindle nose: A 2 - 6 spindle bore: 73 mmtool turret with 10 work positions: 2 x workpiece feeding device: workpiece magazin: 14 Stückmax. workpiece diameter: 200 mmworkpiece weight max.: 2 x 8 kgworkpiece length - max.: 120 mmrapid traverse: 24 m/minfeed - longitudinal/cross: 0 - 1260 mm/minspindle motor: 11/15 kWDriven tools: 3,7/5,5 kWturning speed of the driven tools: 4000 U/min.total power requirement: 61 kVAweight of the machine ca.: 6,3 tdimensions of the machine ca.: 3,1 x 2,9 x 3,6 mmCE signed: Condition: Not more under power: Electric 400 Volt: Power clamp.chuck: Howa Chip conveyor: Cooling equipment: Scharnierband- C ...

Key data: 630 mm, 2000 mm

incl. steady bezel and multifix holder

faceplate diameter: 3300 mmswing diameter: 4000 mmturning height: 3050 mmworkpiece weight: 25 tfaceplate turning speed range: 8 - 40 U/minram swivable +/-: 30 °main drive motor: 55 kWControl: Heidenhain TNC 640 total power requirement: ca. 85 kWweight of the machine ca.: 85 tdimensions of the machine ca.: 8,0 x 7,7 x 6,7 mConversion and modernisation in 2024equipped with:- CNC control Heidenhain TNC 640 & Handwheel- 2 swivelling ram supports (1x CNC controlled)- chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Siemens 3 T 6 + Siemens Simodrive

max. Spindle speed: 5000 U/min.travel -x axis: 160 mmtravel -z axis: 450 mmnumbers of turret head positions: 12 tool taper: VDI 30 Control: Heidenhain iT Plus Dimensions (L x W x H): 4,5 x 2,5 x 2,5 mweight of the machine: 3700 kgCNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310Additional equipment:- C-AxisThe machine is in good condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: CTX310 | CTX-310The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1800 mmswing diameter: 2000 mmturning height: 1270 / 1120 mmControl: SIEMENS 840 D workpiece weight max.: 5000 kgram head dimension: 250 x 250 mmtable turning speeds: 1 - 320 U/mincross rail - adjustment: 400 mmram head - cross travel: (X) -2770 / +2275 mmram head - vertical travel: (Z) 1250 mmc-axis: 360° (0,001°) degmilling drive: 37 kWturning speed range - milling: 10 - 3000 U/minpower capacity - table: 100 kWTorque: 31784 Nmfeed range: (X/Z) 0,1 - 15000 mm/mintotal power requirement: kWweight of the machine ca.: 55 tdimensions of the machine ca.: mUsed CNC vertical lathe for turning, drilling and millingFirst machine installation in the year 2011.Max. workpiece diameter: 2040 mmMax. workpiece height: 1270 mmRam stroke: 1250 mmMax. workpiece weight: 5000 kg (per pallet/chuck)Table speed range: 1.0 - 320 rpmTable drive motor: 100 kWDrilling and milling spindle:  ...

Tip height: 205 mm Center width: 1500 mm Circumferential Ø: over bed 410 mm Spindle bore: 47 mm Spindle holder: size 6 Pick-up cone tailstock: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/flat 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg

Tip height: 250 mm Center width: 2000 mm Circumferential Ø: over bed 500 mm Spindle bore: 50.8 mm Spindle holder: size 6 Pick-up cone tailstock: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/flat 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space requirement: 3600 x 1100 x 1500 mm Weight: 1875 kg

bar material dia.: 32/38 mmspindle passage: 44 mmturning length: 320 mmturning speeds: 200-8000 U/minc-axis: 0,001 Gradgripping station: 32/38 mmturning length: 120 mmturning speeds: 200-8000 U/minc-axis: 0,001 0number of tools: 13 fixnumber of milling stations: 4+5 drivencontrol: Mitsubishi Meldas Number of axles: 5+2 St.total power requirement: 7,5 kWweight of the machine ca.: 2850 kgdimensions of the machine ca.: 2,5 x 1,4 x 1,75 + Irco mbar loader: Breuning Irco Simag fire distinguisher: Kraft & Bauer CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader Breuning Irco SimagON/OFF 23.471hRunning hours 21.495hGBL function (standard)LFV function: noThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 730 mmcontrol: FANUC 21i rapid traverse: 15/24 mm/minspindle turning speed range: 4000 U/minspindle motor: 19 kWx-axis: 240 mmz-axis: 640 mmrapid travel (x and z-axis): 18 /24 m/minspindle bore: 66 mmtailstock quill taper MT: 5 tailstock quill stroke: 120 mmtotal power requirement: 50 kVAweight of the machine ca.: 5,5 tdimensions of the machine ca.: 3 x 1,7 x 1,8 m- CNC control FANUC 21i-TB (with Manual Guide I)- hydraulic hollow clamping cylinder- 12-position tool turret, driven tools 4000 rpm, 2.8 kW- Tool monitoring- SMW Autoblok KNCS N225-65 chuck- C-axis (with disk brake for milling operation, Transmit software for end face machining and cylinder interpolation for shell machining)- B-axis- Tailstock (MK 5)- Chip conveyor- Coolant system with high-pressure pump- Parts catcher- Radial and axial milling headsTranslated with DeepL.com (free versio ...

turning diameter: 120 mmturning length: 380 mmcontrol: Fanuc 18 iTB max. swing diameter: 300 mm: : 8000 min/-1: 7,5 kW: 26 Nmspindle nose: 100 mmspindle passage: 32 mmA-Axis: : 8000 min/-1: 5,5 kW: 23 Nmspindle nose: 100 mmspindle passage: 32 mm: : 12 pos.tool taper: VDI 16 Sub Spindle: x-axis: 400 mmz-axis: 400 mmfeeds:: rapid traverse: 12 m/mintotal power requirement: 20 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,8 x 2 x 1,7 m2022 New glass scale Heidenhain and replacement of smaller parts, new FANUC CNC KeyboardCNC - Ultra precision turning centre (X-, Z-, E-, C-Axe)- CNC control Fanuc 18iTB- Main and counter spindle- SAUTER tool turret 16-fold (0.5.480.510) VDI 16- Linear tool slide- automatic doors- Chip tray- Coolant system with fine filter (high Pressure Pump)- 3 jaw chucks- Various clamping devices/pressure collets- Various tool holdersControl On: 240 ...

centre height: 255 mmcentre distance: 1080 mmturning diameter over bed: 500 mmturning diameter over slide: 290 mmturning length: 1000 mmspindle taper: KK 8 DIN 55027control: Sinumerik 810 D SIEMENSbed width: 360 mmspindle bore: 70 mmturning speed range: 2 - 2800 U/minrapid travel - longitudinal/face: 10 / 5 m/minquick change toolholder: MULTIFIX Typ B / CAPTOdrive capacity - spindle motor: 11,0 kWtaper in tailstock-quill: MK 5 dia. of quill: 80 mmquill stroke: 160 mmcoolant: voltage: 400 Vtotal power requirement: 16,0 kVAweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,85 x 1,60 x 1,80 mchip conveyor: 4,00 x 0,40 x 1,50 m- Serial-No.: 346 / 03- control: SIEMENS Sinumerik 810 D- quick change tool holder MULTIFIX- coolant equipment- machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1800 mmswing diameter: 2000 mmturning height: 1500 mmControl: SIEMENS 840 D workpiece weight max.: 5000 kgram head dimension: 250 x 250 mmtable turning speeds: 1 - 320 U/minpower capacity - table: 100 kWTorque: 31784 Nm0: 218 kwweight of the machine ca.: 55 tDimensions:- Turning diameter on the faceplate 2000 mm- Faceplate diameter 1800 mm- Turning height with turning head L100 1500 mmPower on the ram:- Clamping force of tool holder or accessories 120,000 N- Max. Feed force Z and X axis 30,000 N- Drive power of the milling, drilling and grinding spindle 37 kW- Speeds for turning 10 - 3000 rpmTravels:- Axis X, horizontal support on the crossbeam -2270/+2275 mm- Axis Z, vertical support on crossbeam 1250 mm- Axis C, table rotation 360°Feed speeds:- Axis X 15,000 mm/min- Axis Z 15,000 mm/min- Axis C 3.25 rpmCoolant system:- Coolant ...

faceplate diameter: 1550 mmswing diameter: 1750 mmturning height: 1250 mmslide adjustment: 700 mmControl: Siemens type: 840 Dpower capacity: 56 kWtransmission ratio: 2 turning speeds: 200 U/min: live tooling: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.