lathes used for sale (3,038)

faceplate diameter: 1400 mmswing diameter: 1600 mmturning height: 1500 mmControl: Siemens type: 840 D Tool changer: workpiece weight: 6500 kgSlide movement vertical: 1000 mmturning speeds: 10-315 U/minFeed: 3600 mm/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1650 mmturning diameter over slide rest: 1200 mmturning length: 7500 mmturning dia. in gap: 2500 mmspindle diameter: 105 mmspeed: 3,55 - 180 (x24) U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1070 mmturning length: 8500 mmcontrol: Alan Bradley 9 Series Turning diameter over slide: 800 spindle diameter: 130 mmspeed: 1,12 - 1120 m/minvoltage: 480 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 600 mmturning length: 1500 mmcontrol: C200 T turning diameter over slide rest: 425 mmspindle passage: 100 mmTool changer: live tooling: turning speeds: 10-2800 U/mintransmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mmsteady: tail stock: c-axis: total power requirement: 53 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 580 mmturning length: 1600 mmcontrol: Siemens 810 Tturning diameter over slide rest: 320 mmspindle passage: 85 mmTool changer: turning speeds: 12,5-4000 U/mintransmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mmsteady: 170 mmtail stock: total power requirement: 53 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1070 mmturning length: 4000 mmcontrol: Siemens type: 810 T turning diameter over slide: 700 mmspindle passage: 104 mmbed width: 710 mmturning speeds: 3,55-710 U/minmax. workpiece weight between centres: 5000 kgsteady: 500 mmHolder Multifix: total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 320 mmturning length: 750 mmcontrol: Siemens type: 810DL CCUOturning diameter over slide rest: 150 mmcross movement: 185 mmspindle passage: 52 mmturning speeds: 14-3550 U/mintransmission ratio: 2 quill stroke: 120 mmrapid traverse: 6 m/minmain drive motor: 7 kW3-jaw-chuck diameter: 200 mmtotal power requirement: 10 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,6x1,44x1,44 m8950 turning hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mmswing diameter: 1500 mmturning height: 1300 mmslide adjustment: 800 mmside head - cross travel: 550 mmdigital readout: Heidenhain total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 436 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mIt is a unit price. There are 6 pieces available. For crankshaft work. The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 4000 mmturning diameter over slide rest: . mmturning length: 5000 mmtotal power requirement: 30 kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mmcentre height: 510 mmwidth: 110 mmloading area: 360x310 mmdiameter of quill: 80 mmbearing diameter: 75 mmWheel width: 36,5 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mmswing diameter: 1400 mmturning height: 1250 mmcross rail - adjustment: 600 mmwork spindle adjustment: 750 mmTools changer for 12 tools: total power requirement: 69 kWweight of the machine ca.: 25 tdimensions of the machine ca.: mreconditionedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3500 mmswing diameter: 4000 mmturning height: 3150 mmslide adjustment: 1700 mmtable load: 25 tturning speeds: U/minFeed: mm/Udigital readout: Heidenhain Rest: 2 Side head: total power requirement: 90 kWweight of the machine ca.: 95 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mmturning diameter over slide rest: 710 mmturning length: 6000 mmTorque: 35000 NmHeight of centres: 550 mmsteady: 100-440 mmsteady: 280-550 mmsteady: 80-300 mmchip conveyor: workpiece weight: 10000 kgworkpiece weight in steadies max.: 15000 kgtotal power requirement: 55 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mmswing diameter: 1400 mmturning height: 980 mmtable load: 3 tControl: Siemens type: Sinumerik 880Tx-axis: 1000 mmz-axis: 1000 mmw-axis: 600 mmc-axis: 360 °live tooling: Tool changer: 62 Pos.chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kWtotal power requirement: kWweight of the machine ca.: 26 tdimensions of the machine ca.: 8,7x7x5,2 m• Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl =4,5 – 500U/min• Ram section / Stößel Querschnitte: 240mm x 240mm• Live tools speed / Drehzahl der angetriebene Werkzeuge:o Schleifspindel waagerecht: 3000U/mino Schleifspindel senkrecht: 3000 – 6000U/mino Fräsen: 10-2000U/min• Live tools power / KW Leistung der angetriebenen Werkzeuge:o Schleifspindel waagerecht: 3kWo Schleifspindel senkrecht: 3kWThe  ...

turning diameter: 280 mmturning length: 800 mmcontrol: Siemens type: 840 D c-axis: live tooling: Tool changer: turning speeds: 4000 U/minswing diameter: 320 mm3 jaw chuck Forckrath: 250 mmtail stock: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 950 mmturning diameter over slide rest: 569 mmturning length: 2200 mmspindle bore: 90 mmfaceplate: 800 mmsteady: 500 bed width: 580 mmRapid travel: turning speeds: 800 U/mindigital readout: stepless reg. with elect. turning speeds: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 6,5x2x1,8 mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mmswing diameter: 1400 mmturning height: 1500 mmControl: Siemens type: 880T Table load: 6000 kgcross rail - adjustment: 700 mmMax ram stroke: 1000 mmturning speeds: 400 U/mintransmission ratio: 2 Feed: 3-8000 mm/minTool changer: chip conveyor: total power requirement: 69 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 1250 mmcontrol: Siemens type: 840 C swing diameter: 590 mmturning speeds: 3500 U/minTorque: 275/178 Nmspindle passage: 50/65 mmclamping chuck diameter: 250 mmoutput: 43/28 kwTool changer: 80 Pos.tool taper: Capto C 4Turret 12-fold, 12 stations: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3500 mmswing diameter: 4100 mmturning height: 1400 mmControl: Siemens Slide movement horizontal longitudinal: 2100 slide adjustment: 1300 mmcross rail adjustment: 1300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 500 mmturning length: 1100 mmcontrol: Pfillips 432turning diameter over slide rest: 420 mmspindle turning speed range: 3000 U/minspindle passage: 82 mmTool changer: 12 tool taper: VDI 40 total power requirement: kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mmswing diameter: 1650 mmturning height: 950 mmram head dimension: 200x200 mmcontrol: Heidenhain type: Manuel Plus 410total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 630 mmcontrol: Fanuc Oi-TD total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc Oi-TD control3-jaw chuck diameter 250mm12-fold revolvertail stockchip conveyorThe machine has only 880 spindle hoursTechnische Daten: / technical detailsSchwingdurchmesser / rotary diameter 650 mmDrehdurchmesser / turning diameter 400 mmDrehlänge / turning length 630 mmX-Weg / X-travel 230 mmZ-Weg / Z-travel 630 mmmax. Drehzahl / max. spindle speed 4500 UpM /rpmAnzahl der Revolverplätze / number of tool places 12 Antriebsleistung Spindel / drive capacity spindle 11/15 kWGewicht ca. / weight ca. 6450 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad w ...

max. turning diameter 500 mm max. turning length 1400 mm 12-station turret not driven

Machine Type: CNC Lathe Manufacturer: GILDEMEISTER Type CTX 500 S2 Year of construction 1998 Control CNC Pilot Heidenhain Country of origin Germany Delivery time by arrangement Freight base from location Technical details Turning diameter max. 445 mm Turning length 1,000 mm Control CNC Pilot Heidenhain Circumferential diameter 680 mm Main spindle: Speed range – main spindle 18 - 3,600 rpm/-1 Drive power – main spindle 23 kW Max. torque 650 Nm Spindle nose 220h5 Chuck diameter 315 / 400 Spindle bearing diameter 140 mm Spindle bore 107 mm Tool turret: Number of tool positions 12 pos. Tool holder 40 DIN69880 Travel: x-travel 320 mm z-travel 1,097 mm Tailstock: Quill stroke 120 mm Tailstock mount MK 5 Quill pressure 14 kN Feeds: Rapid traverse X : 24 / Z : 30 m/min Feed force X: 8 / Z: 15 kN Total power requirement 58 kVA Machine weight appr ...

Technical data and equipment: Travel X/Z - X2/Z2: 270/750 // 205/750 mm Travel Y: 100 (+-50) mm Max. rod diameter: 65 mm Main spindle drive: 0 - 5000 rpm Sub-spindle drive: 0 - 7000 rpm Tool holder: VDI 30 Control: Siemens Sinumerik 840 PL Revolver: 2 pcs. for applied Tools (12 slots each) Turret: Upper turret is equipped with Y-axis Spindle: 2 pcs main and counter spindle with C-axis Accessories for the machine: - Bar feeder Irco Profimat 70.6/270.6 - Internal cooling - Driven tools (straight and angled) - Chuck for main and counter spindle -Suction -Conveyor - Pick-up device with outfeed conveyor - KSS system Knoll SF 1000/Turbo-1 - Various holders approx. 80 pcs VDI 30 - Drill rod holder - Muzzle holder Machine space requirements: 3400 x 2600 x 2300 mm // 7600 kg

OKUMA HOWA Type ACT 4 CNC control Fanuc 10 TF Turning diameter 380 mm Circulation over bed 520 mm Turning length 750 mm Revolver 12 speed Spindle speeds 20 - 3500 rpm Fodder Tailstock Spindle bore 75 mm Feed adjustment by foot switch CAM connector

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg