lathes used for sale (3,103)

turning diameter: 800 mmturning length: 2000 mmcontrol: Monfort R&D turning diameter over slide: 520 mmspindle hollow: 88 mmtotal power requirement: 53 kWweight of the machine ca.: tdimensions of the machine ca.: 4,2x2,2x1,9 m- Standard chuck diameter: 315/400/500 mmWork spindle drive:- SiemensThree-phase servo drives with mechanical safety clutch- Maximum Z-axis feed force: 23.9 kN- Maximum X-axis feed force: 11.3 kN- Rapid traverse speed Z-axis: 6.8 m/min- Rapid traverse speed X-axis: 4 m/minTool setup:- Multifix quick-change tool postTailstock:- Outer quill diameter: 120 mm- Maximum quill stroke: 210 mm- Internal taper: MK6Capacities:- Hydraulic oil tank approx.: 15 l- Additional lubricating oil tank approx.: 6 l- Coolant tank approx.: 120 l- Coolant tank for chip conveyor approx.: 260 lThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the  ...

turning diameter over bed: 930 mmturning diameter over slide rest: 630 mmturning length: 6000 mmturning dia. in gap: 1250 mmspindle diameter: 95 mmspeed: 8-800 (x24) U/mintotal power requirement: 22 kWweight of the machine ca.: 1100 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: 1500 mmcontrol: FanucSystem 6 T total power requirement: kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4x2x1,5 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mmcentre height: 510 mmwidth: 110 mmloading area: 360x310 mmdiameter of quill: 80 mmbearing diameter: 75 mmWheel width: 36,5 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mparts catcherThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software sol ...

turning diameter: 480 mmturning length: 800 mmcontrol: System TX8F turning diameter over slide: 240 mmspindle passage: 65 mmchuck diameter: 200 mmturning speeds: 4000 U/minpower capacity: 30 kWtotal power requirement: kWweight of the machine ca.: 4,3 tdimensions of the machine ca.: mpowered toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mmcentre height: 510 mmwidth: 110 mmloading area: 360x310 mmdiameter of quill: 80 mmbearing diameter: 75 mmWheel width: 36,5 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 520 mmcentre height: 500 mmwidth: 130 mmquill:: 3 St.diameter of quill: 70 mmbearing diameter: 65 mmwidth: 20 mmbase plate: 415x270 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 626 mmturning length: 3000 mmcontrol: Siemens type: 840D spindle passage: 100 mmTurret 12-fold, 12 stations: turning speeds: 2800 U/mintotal power requirement: kWweight of the machine ca.: 18 tdimensions of the machine ca.: mMachine overhauled in 2003 and equipped with a Siemens 840 D- NC steady rest- 400 mm power chuckThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch ...

faceplate diameter: 5000 mmswing diameter: 6100 mmturning height: 2300 mmcontrol: Siemens type: Sinumerik840D mm0: 55 kWtable load: 55 tRest: 2 Drehsupporte ram head dimension: 340x340 mmTable load: 55000 kgturning speeds: 280 U/minchip conveyor: new control Siemens type Sinumerik 840D in 2015Accessories and cabinets can be purchased optionallyThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus  ...

turning diameter: 325 mmturning length: 600 mmcontrol: Siemens type: 840D Turret 12-fold, 12 stations: live tooling: turning speeds: 5000 U/minpower capacity: 25 kWy-axis: mmc-axis: total power requirement: 35 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 3,5x2,5x2,1 mTool speed: 4500 rpmX-axis rapid traverse: 60 m/minZ-axis rapid traverse: 45 m/minMachine with Siemens 840 D powerline with Shopturn- C and Y axes, driven tools- IRCO ILS-RBK bar loader- Coolant system with internal coolant supply- Paper belt filter- Partial hollow clamping device- Oil mist separator- Counter spindle- Parts catcherThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity ...

faceplate diameter: 1600 mmswing diameter: 2000 mmturning height: 1600 mmControl: Siemens Sinumerik 805 turning speeds: 1-250 U/minTable load: 12000 kgmain drive device: 56 Control system manufacturer Siemens type Sinumerik 805Accessories and cabinets can be purchased optionallyThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the soft ...

turning diameter: 450 mmturning length: 1000 mmcontrol: Fanuc Monforts Control Fturning speeds: 45-4000 U/minchip conveyor: Tool turret 12 positions: VDI 40swing diameter: 600 mmspindle passage: 85 mmpower requirement: 37 kWtotal power requirement: 55 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for thi ...

faceplate diameter: 850 mmswing diameter: 1200 mmturning height: 1000 mmControl: Siemens type: 840 D Tool changer: 36 Pos.x-travel: 870 mmz-travel: 1020 mm: live tooling: c-axis: 0weight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 302 mmturning length: 600 mmcontrol: Siemens type: 810 T tail stock: Tool changer: 12 Pos.tool taper: VDI 30 chip conveyor: 3-jaw-chuck diameter: 200 mmswing diameter: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m• 12-station tool changer• Includes tool holder• Tool holder Ø30• Max. turning length = 600 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We  ...

turning diameter: 290 mmturning length: 850 mmswing diameter: 600 mmcontrol: Siemens type: 840 D mmspindle passage: 103 mmturning speeds: 3000 U/minlive tooling: 3000 U/minrapid travel - grinding spindle: 25 m/mintotal power requirement: 65 kWweight of the machine ca.: 11 tdimensions of the machine ca.: mSerial No. 1130.2011-30Equipment: Main spindle / counter spindle2 power chucks2 tool turretsC-axisCabinChip conveyorCoolant system 22 barOffer price without toolsOptional accessories available for purchase: 106 tool holders for internal and external machining, 20 driven tools (including 10 angle tools)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,0 ...

faceplate diameter: 1200 mmturning diameter: 1520 mmturning speeds: . U/minmax. workpiece weight -without tailstock: 6000 kgmax. workpiece weight between centres: 25000 kgPlate area: mmturning diameter in the pit: 3200 mmControl: Siemens turning length: 1200 mmmain drive: 70 kWtotal power requirement: 70 kWweight of the machine ca.: tdimensions of the machine ca.: 22x5x4 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwa ...

turning diameter: 280 mmturning length: . mmcontrol: Mazatrol 640 T x-travel: 190 mmy-travel: 309 mmz-travel: 330 mmturning speeds: 4000 U/minfeed: 30 m/minnumber of tools: 12 bar loader: ja total power requirement: 24 kvAweight of the machine ca.: 3,5 tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us. You can find further offers on our website. Tours arepossible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the soft ...

turning diameter: 300 mmturning length: . mmcontrol: Mazatrol 640 T x-travel: 190 mmy-travel: 1000 mmz-travel: 575 mmturning speeds: 4000 U/minfeed: 30 m/minnumber of tools: 12 bar loader: nein total power requirement: 18,5 kWweight of the machine ca.: 5,9 tdimensions of the machine ca.: 5600x2100x2200 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us. You can find further offers on our website. Tours arepossible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with Mo ...

turning diameter: 1100 mmturning length: 6000 mmcontrol: Siemens 840D turning diameter over slide: 740 mmtotal power requirement: 22 kWYear of manufacture 1999Control: Siemens 840DTurning length (mm) 6000Max. turning diameter (mm) 1100Max. turning diameter over slide (mm) 740Spindle diameter (mm) 105Speed 16 - 1800 (18x)kW 22Voltage 380VHz 503-jaw chuck ø (mm) ¦4-jaw chuck ø (mm) ¦Fixed steady rest ø (mm) 2xThrough-spindle cooling ¦Multifix tool postThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can f ...

Diameter of the table: 3000 mmturning diameter: Max. 5500 mmcolumn travel: 1000 mmtable turning speeds: 82 U/mintable load: max. 25 tturning height: 2000 mmweight of the machine ca.: 75 tdimensions of the machine ca.: mWorkpiece height 1850 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us. You can find further offers on our website. Tours arepossible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4000 mmswing diameter: 4300 mmturning height: 1750 mmslide adjustment: 1000 mmtable load: 18 tturning speeds: 1-92 U/minControl: Siemens type: 840 D mmRest: 2 chip conveyor: ram head dimension: 250x250 mmFeed: 1-4000 mm/minmain gear-box motor: 55 kWtotal power requirement: 85 KVAweight of the machine ca.: 64 tdimensions of the machine ca.: 8x5,8x8 mThe machine was overhauled in 2007.The machine is currently designed to machine rings,but can be converted again for machining large parts.Additional informationChip conveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested ...

turning diameter: 1020 mmturning length: 4000 mmturning diameter over slide: 720 mmHolder Multifix: control: Siemens type: 805 tailstock quill taper MT: 6 transmission ratio: 2 turning speeds: U/minturning speeds: U/minbed width: 560 mmspindle bore: 200 mmworkpiece weight: kgfaceplate: 1000 mmmake: Forkhardt PSA 10003 jaw chuck Forckrath: 500 mmsteady: 263 mmsteady: 500 mmtotal power requirement: KVAweight of the machine ca.: tdimensions of the machine ca.: 7,4x2,5x2,5 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please  ...

faceplate diameter: 2500 mmswing diameter: 2800 mmturning height: 2200 mmtable load: 15 tturning speeds: U/minFeed: mm/Udigital readout: Rest: 2 Side head: total power requirement: 55 kWweight of the machine ca.: 56 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech  ...

faceplate diameter: 4770 mmswing diameter: 10000 mmturning height: 3500 mmtable load: 100 tturning speeds: 40 U/mintable drive: 125 kWControl: Siemens type: 840 D Rest: 1 slide adjustment: 1421 mmram head dimension: 250x250 mminclination: +/-30 °live tooling: 16 Kwspindle taper ISO: 50 spindle turning speed range: 3000 U/minchip conveyor: total power requirement: 150 kWweight of the machine ca.: tdimensions of the machine ca.: mMachiney Refurbished 2003Table extension up to 8000 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business ...

turning diameter over bed: 430 mmturning diameter over slide rest: 220 mmturning diameter in the gap: . mmturning length: . mmturning speeds: 12,5-1600 U/minbed width: 410 mm3-jaw chuck: 250 mmspindle passage: 550 mmcentre distance: 750 mmtotal power requirement: kWweight of the machine ca.: 2 tdimensions of the machine ca.: mNo. 65The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamT ...

faceplate diameter: 4000 mmswing diameter: 4300 mmturning height: 1750 mmslide adjustment: 1000 mmtable load: 18 tturning speeds: 43,7 U/minControl: Siemens type: 840 D mmRest: 2 chip conveyor: ram head dimension: 250x250 mmlive tooling: 36 kwtotal power requirement: 85 KVAweight of the machine ca.: 64 tdimensions of the machine ca.: 8x5,8x8 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hi ...

turning diameter over bed: 1400 mmturning diameter over slide rest: 1400 mmturning length: 6000 mmworkpiece weight: 30 tturning speeds: 100 U/min: total power requirement: 75 kWweight of the machine ca.: 70 tdimensions of the machine ca.: mMaschinennaummer 5110The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of  ...

turning diameter over bed: 1400 mmturning diameter over slide rest: 1400 mmturning length: 5000 mmworkpiece weight: 25 tturning speeds: 0,6-300 U/min: 4-jaw-chuck diameter: 800 mmcontrol: Siemens transmission ratio: 3 total power requirement: 100 kWweight of the machine ca.: 70 tdimensions of the machine ca.: mRenishaw ProbeDepth of profile with 80mm tool 355mm @ 1400mm dia.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look for ...

faceplate diameter: 2000 mmturning diameter: 2500 mmturning speeds: 0,5-100 U/minmax. workpiece weight -without tailstock: 6000 kgmax. workpiece weight between centres: 25000 kgPlate area: mmturning diameter in the pit: 3200 mmtotal power requirement: 55 kWweight of the machine ca.: tdimensions of the machine ca.: 22x5x4 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data fo ...