boring mills and machining centers used for sale (3,257)

Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement.

Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-s ...

Scharmann - WB 80 / Heidenhain Digital Display -Travel X/Y/Z 1300x1200x1200mm -Heidenhain digital display -Rotary table - 1200x1200mm -Table load max. 5 to. -Spindle holder MK5 -Automatic feeds 0.053-6.35mm -Rapid traverses -Spindle speeds 24-2880 rpm -Coolant device -Various accessories / tool holders etc.

Offer 25032 Technical data: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 65 mm - Tapping device up to M 60 - Drilling spindle holder MK 5 - Drilling spindle stroke 240 mm - Projection 400 mm - Table with 2 T-slots 720 x 560 mm - max distance table – drilling spindle approx. 850 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - AZ continuously variable transmission with manual transmission - Drilling spindle speeds infinitely adjustable 40 - 1600 rpm - Drive 400 V / 5.5 kW - Space requirement approx. W 850 x H 2480 x D 1350 mm - Weight approx. 1450 kg

Offered is a used Donau DR 32 rapid radial drilling machine series 731. Tool holder: MK4, spindle stroke: 200mm, outreach: approx. 900mm-1050mm, height adjustment: approx. 400-600mm, speed range: 40-2000rpm, feeds: 0.1/0.2/0.3/0.4mm per revolution, integrated coolant system, equipped with swiveling arm, large T-slot table, weight approx. 1500kg-1800kg, machine dimensions X/Y/Z approx. 1800mm/1000mm/2200mm. Inspection is possible by appointment.

Control Heidenhain Mill-Plus Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 8,000 rpm NC rotary and swivel table Chip conveyor

3 pcs double spindle machining centers SW BA422 built 2015/2014/2014 - 4-axis version Workspace x-axis 400 mm y-axis (tool change position) 500 (775) mm z-axis 425 mm Spindle spacing 400 mm Double swivel beam (Q-axis) 0 – 180° with NC rotary axes and counter bearings ----- Number of spindles 2 Spindle speeds up to 17,500 1/min Power 40/ 100% ED 2x 35/26 KW / 80 Nm ----- Feed/rapid traverse x/ y/ z 55/ 70/ 70 m/min Tool magazine 2 x 60 tool positions Tool holder HSK 63 Max. tool diameter 80 / 160 mm Max. tool length 300 mm Max. tool weight 10 kg Installation area L x W x H approx. 7.0 x 4.0 x 4.38 m Machine weight approx. 18,000 kg Transport weight approx.  ...

Vertical Drilling and Milling Center Brother TC-22A with 4th Axis Year of Make: 1999 Control: Brother Technical data: Spindle speed: max. 12,000 rpm Tool holder: BT 30 Number of magazine slots: 26 Travels: X-axis: 500mm Y-axis: 400m Z-axis: 410mm 4th axis: 0.001° Accessories: Nikken Rotary Table Base plate zero point clamping system We have 2 identical machines in stock.

Key data: 750 mm, 600 mm, 400 mm

Röders RFM 750 - a reliable companion for your production requirements. This used 3-axis graphite processing machine from 2001 convinces with its solid construction and precision. Details YOC 2001 incl. graphite extraction Accessories WITHOUT accessories such as tools, mounts and zero-point clamping system or clamping plates. Technical data Travel X/Y/Z: 750/600/400 mm Spindle speed: up to 42,000 rpm Spindle power: 7.5 kW Machine weight: approx. 5,500 kg Dimensions: 3,000 x 2,500 x 2,800 mm

Key data: 750 mm, 600 mm, 560 mm

DMG DMC 75V Linear . Details: YOC 2004 Program run 38,958 hours Spindle hours 37,462 hours Rapid traverse 90m/min Travel X-750/Y-600/Z-560mm Spindle HSK63 18,000rpm Tool magazine 30 places Direct path measurement system Table 950 x 650 Heidenhain iTNC 530 Outer blowing air Accessories: WITHOUT accessories such as tools, mounts and zero-point clamping system.

Year of construction: 2009 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1500 Y-axis travel mm: 800 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001º) A-axis degrees: 0º/-90º B-axis degrees: ±90(0.001º) Rapid traverse m/min: 30 Worktable Number of pallets: 4 Table dimensions mm: Ø1000x800 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 16000 Spindle drive power kW: 28(100%ED) Spindle torque Nm: 84/63 (40/100%ED) Tool system Tool holder: HSK-A 63 Tool magazine slots: 208 With free neighboring places mm: 140 With occupied neighboring places mm: 80 Max. Tool Length mm: 330 Max tool weight kg: 10 Chip-to-chip time s: 7 Equipment Chip conveyor Signal lamp Tool measuring arm Bar loader Chuck foot switch (double) for main and counter spindle Driven tools included Machine running times Under power: 25546 Rated power kVA: 54 Basi ...

Travel X/Y/Z: 1060mm/610mm/610mm, table dimensions X/Y: approx. 1270mm/610mm, max. table load: 1100kg, spindle power: 18kW, feed rate: 7600mm/min, rapid traverse: 30m/min, tool positions: 24, tool holder: SK40, speed: 12000rpm, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 450mm/3750mm/2800mm, weight: approx. 6700kg, control: Hurco Ultimax 4. Documentation available. On site inspection is possible.

Key data: 3000 mm, 850 mm, 800 mm

For sale Doosan 5-axis machining center type 850 LSR. equipped with a Fanuc control system, Key technical data (VCF 850LSR Travel (X/Y/Z): 3000 / 850 / 800 mm Table dimensions: 3500 x 870 mm Maximum table load: 3500 kg (incl. integrated turntable) Integrated rotary table (C-axis): Ø 800 mm B-axis (spindle inclination): 220° (+110° / -110°) Spindle speed: 12,000 rpm (standard) Spindle power: 18.5/22 kW (Fanuc) Spindle taper: BT40 (BIG-PLUS) Tool magazine: 60 stations (chain magazine) Rapid traverse (X/Y/Z): 40 m/min Machine weight: approx. 24,000 kg The machine is available from stock, subject to prior sale. For more information; Send an e-mail to chrismachinematch.nl

A CNC vertical machining center Fadal with increased torque is available. Travel X/Y/Z: 1140mm/635mm/61mm, table dimensions X/Y: 1350mm/635mm, rapid traverse X/Y: 25m/min, rapid traverse Z: 17m/min, max. feed rate: 15m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.0015mm, spindle speed: 10000rpm, tool interface: SK40, max. spindle torque: approx. 360Nm, tool stations: 24. Machine dimensions X/Y/Z: approx. 3300mm/2600mm/3050mm, weight: approx. 6000kg, control: Siemens. Documentation available. On site inspection is possible.

Cincinatti Machining Center, 2 Available: Arrow/Milacron 500, built in 1995 & 2000 Technical data: Travel (X / Y / Z) 510 mm / 510 mm / 510 mm Work table (L × W) 700 × 520 mm Maximum table load / workpiece weight approx. 350 kg evenly distributed Tool changer (tool magazine) 21 tool positions Spindle holder / tool holder SK 40 Spindle speed (min–max) 60 – 6000 rpm (sometimes specified for newer variants up to 8000 rpm) Machine weight approx. 3050 kg (≈ 3 t) Dimensions approx. 2000 × 2650 × 2700 mm (L × W × H) Number of axles 3-axis CNC

Key data: 630 mm, 1100 mm, 600 mm

Clamping area: Ø700 x 500 mm Rapid traverse X/Y/Z: 60/60/56 m/min Milling spindle Max. spindle speed: 18,000 rpm SK-40 Other equipment Air on the workpiece Cooling by the spindle, 70 bar Renishaw RMP 600 Probe F) Tool tip control 5-axis simultaneous machining Tool radius compensation – 5-axis simultaneous Drilling cycle with torque-dependent chip breaking G00 slope constant Synch. Threading Cylinder interpolation EIA Dynamic Compensation 2 (included 1) KNOLL Coolant System KF200/1250 Paper Belt Filter 70 bar high-pressure pumoe KNOLL Chip Conveyor 640-S-1

Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.

Technical data: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

Offer 25498 Technical data: - Drilling capacity 50 mm - Tapping device up to M 40 mm - Tool holder MK 5 - Spindle stroke 280 mm - Spindle speeds 38 - 2000 rpm - 6 feed speeds 0.08 - 0.83 mm/rev - Drive 400 V / 5.5 kW - Radius min. / max. 350 / 1400 mm - Removal of spindle - machined base plates - min / max 350 / 1250 mm - Machined base plate with T-slots W 1650 x D 930 mm - electr. Central clamping - Coolant device + lighting - Dice table - Space requirement approx. W 2300 x H 2400 x D 1050 mm - Weight approx. 3500 kg

2 x BAZ DMG DMU 60T BJ 2000/2002

Key data: 1100 mm, 600 mm, 600 mm

Vertical CNC Machining Center Manufacturer: Kaast Type V11L Year of construction 2022 Control Siemens 828 Shop Mill Travel X/Y/Z 1100/600/600mm 24 Way Tool Changer Tool holder SK40 max. speed 10,000 rpm Measuring System Linear Glass Scales Chip conveyor Tool Breakage Control Air and coolant cooling Machine is in a used good condition. For more information, I am always available at 0177 8957069. Machine will be available from March 2026.

Key data: 635 mm, 510 mm, 460 mm

Vertical CNC Machining Center Manufacturer Deckel Maho Type DMC 635V Year of manufacture 2005 Control Siemens 840D ShopMill + memory card Travel X/Y/Z 635/510/460mm Spindle speed max. 8,000 rpm Tool holder SK40 20 Compartment Tool Changer Chip conveyor Clamping area 790 x 560mm 4. Axle manufacturer Lehmann The machine is in top condition, geometry very good. Machine will be available from July 2026. For more information, I am also available at 01778957069 at any time. Whatsapp is also possible.

Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible.

Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible.

Key data: 100 mm, 3000 mm

Radial drilling machine CSEPEL RFH-100 / 3000 – technically flawless Description: For sale is a used radial drilling machine / column drilling machine / column drilling machine from the manufacturer CSEPEL, type RFH-100 / 3000. The machine is technically flawless and ready for use in the workshop or production. It is ideal for drilling work on medium to large workpieces. Technical data: Manufacturer: CSEPEL Type: RFH-100 / 3000 Drilling capacity: 100 mm Projection: approx. 3,000 mm Speed range: 18 – 1,800 rpm Spindle holder: MK6 Spindle stroke: approx. 400 mm Feed rate: 0.0375 – 2.0 mm/rev Connected load: 15 kW / 380 V Dimensions (L × W × H): approx. 4,400 × 1,600 × 4,200 mm Condition: technically perfect Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Vertical machining center Travel x/ y/ z = 1020/ 600/ 500 mm Table size 1250 x 600 mm max. workpiece weight 800 kg Tool magazine 32 Tool positions HSK 63 Rapid traverse 70 m/min CNC control Heidenhain iTNC 530 Chip conveyor Coolant system

Key data: 750 mm, 600 mm, 520 mm

Universal machining center Spindle speed up to 18,000 1/min; Rapid traverse 50 m/min; Tool magazine 32 tool positions HSK 63; Swivel table - table size 700 x 500 mm; Table load 350 kg; CNC control Heidenhain TNC 530; Chip conveyor; Coolant system

A pillar drilling machine in double column design Ecker und Schmidt is available. Number of spindles: 2, drilling capacity in steel: 23mm, throat depth: 330mm, drilling stroke: 120mm, max. workpiece height: 750mm, spindle taper: MK1, column diameter: 130mm, table dimensions X/Y: 760mm/360mm. Machine dimensions X/Y/Z: approx. 1100mm/1150mm/2100mm, weight: approx. 700kg. On site inspection is possible.

Key data: 440 mm, 280 mm, 315 mm

CNC Machining Center MATRA KIRA KN40VS – FANUC 21-M Specifications (KN40VS) Machine Type: 2-Pallet Machining Center Control: FANUC 21-M Travel: X 440 mm / Y 280 mm / Z 315 mm Pallet size: 500 × 300 mm Tool changer: 12-speed Spindle speed: 200–4,500 rpm Drive power spindle: 7.5 kW Equipment / Condition Pallet changer (2-fold) Machine used, inspection/test run possible by arrangement