boring mills and machining centers used for sale (3,224)

x-travel: 750 mmy-travel: 785 mmz-travel: 600 mmcontrol: FANUC I-Series : : 12000 min/-1: 22/18,5 kWtool taper: BT 40 : 204 Nm: table surface area: 650 x 600 mmmax. table load: 600 kg: -120 / +120 °tool magazin:: : 40 pos.max. tool weight: 8 kgmax. tool diameter: 75 mmmax. tool-dia with free toolbox: 125 mmmax. workpiece length: 300 mmfeeds:: rapid traverse: 45 m/min: 4,5 kNmax. workpiece diameter: 840 mmworkpiece height max.: 500 mmtotal power requirement: kVAweight of the machine ca.: 14,5 tdimensions of the machine ca.: 3,7 x 2,5 x 3,1 m- CNC Control FANUC I-Series (F31i)- 5- Axis simultanous- Swivelling Rotary Tabe- Chip Conveyor- Coolant- ATC 40 (BT 40)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1630 mmy-travel: 762 mmz-travel: 650 mmcontrol: Fanuc i-Series Rapid Travel X / Y / Z-Achse: 30 / 30 / 24 m/minspindle turning speed range: 8000 U/minspindle motor: 18,5 kWtable-size: 1630 x 760 mmtable load: 1,5 tdistance table - lower edge spindle: 150 - 800 mmtotal power requirement: 37,5 kVAweight of the machine ca.: 13,5 tdimensions of the machine ca.: 3,5 x 3,8 x 3,2 m- CNC Control Doosan Fanuc I-Series (F0i)- ATC 30-fold (BT 40)- Coolant- Chip Conveyor- CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity 32 mm Spindle mount MK 3 Projection 290 mm Pinol stroke 160 mm Table size 510 x 300 mm Column diameter 115 mm Spindle speed 55 - 1450 rpm infinitely variable Motor power 0.9 and 1.3 kW pole-switchable Mains connection 380 volts, 50 Hz. Spindle speed via 2 gear stages, 2 motor speeds and infinitely variable via variator gear Table height adjustment via hand crank Machine Light Keyless chuck 1 to 13 mm Space requirements L x W x H 1200 x 650 x 1900 mm Weight 400 kg

x-travel: 1040 mmy-travel: 600 mmz-travel: 500 mmControl: Heidenhain iTNC 530 table surface area: 1250 x 600 mmtable load: 600 kgtool taper: SK 40 spindle turning speed range: 1 - 8000 U/minmax. torque on the spindle: (S1/S6) 140/200 Nmfeed range: 40000 mm/minrapid power traverse in X-and Z direction: 70 m/minrapid motion - y-axis: 40 m/minspindle drive: (100/40 % ED) 13/19 kWtotal power requirement: 39 kVAweight of the machine ca.: 8,9 tdimensions of the machine ca.: mOperating hours 70278Spindle hours 23335Please note the enclosed geometry measurement report with the tool pull-in force measurement.Equipment:CNC control Heidenhain iTNC 530Electronic handwheel Heidenhain HR 410Motor spindle with increased torqueDirect path measuring system in Y-Z axisPreparation for measuring probe30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kgROTOCLEARProduction package 2Inte ...

spindle diameter: 125 mmx-travel: 2000 mmy-travel: 1100 mmz-travel: SK 50 mmspindle taper: Philips 2500 digital readout: Pfillips turning speeds: 925 U/minspindle stroke: 800 mmTable: 1000x1400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - th ...

bore capacity in steel (diameter): 30.0 mmthroat: 293 mmbore stroke: 140 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 225 - 4300 U/mincolumn diameter: 115 mmdistance spindle /table: 132 / 724 mmengine output: 1.0 / 1.6 kWweight: 260 kgMachine height: 1790 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Infinitely variable speed setting by means of an adjusting lever- Spindle protection with electrical fuse- Three separate buttons for clockwise rotation - counterclockwise rotation - stop- Mushroom pushbutton (latching) for EMERGENCY STOP- Main switch, lockable- Rig ...

Description Machining Center Hurco BMC 30 Details Serial No. B3HM-92206089EB with control Ultimax approx. 45 tool holders Replacement spindle 4382 Hours

x-travel: 760 mmy-travel: 460 mmz-travel: 560 mmControl: Siemens Sinumerik 840D b-axis: NC-Schwenkfräskopf A-axis: NC-Rundachse milling-head swivable +/-: -120 / +30 Tool changer: 60 Cooling through the spindle: IKZ 40 barspindle turning speed range: 12.000 U/minspindle motor: 28/19 kWtool taper: HSK-A 63 max. torque on the spindle: 121 pmtotal power requirement: ca. 60 kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: - mUniversal bar machining center- Siemens Sinumerik 840 D 3D path control - Powerline ShopMill- Controlled NC swivel milling head (B-axis)- NC rotary axis with integrated clamping system- NC bar loader- Slide/conveyor belt for parts disposal- Coolant tank 600 ltr. with paper belt filter- IKZ 40 bar through spindle center- Rotating viewing window- Tool breakage control- Chip conveyor- Tool magazine - Chain magazine with 60 magazine slots HSK-A 63- Clam ...

x-travel: 1.000 mmy-travel: 1.000 mmz-travel: 1.000 mmControl: SINUMERIK 840D pl spindle turning speed - stepless: U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m5-axis machining center with SIEMENS SINUMERIK 840D pl control, electron. handwheel, NC swivel rotary table Ø1,000mm, coolant through the spindle, chip conveyor, 180-fold tool-magazine HSK100,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: SIEMENS drilling diameter: Ø 3 - 25 (18) mmturning speeds: 1000 - 6100 U/minbore slide stroke: 850 mmbore depth: 550 mmspindle distance: 240 mmdimensions: ca. 6 5 2,3 mShipping weight: ca. 6000 kg: Packing: ca. 10 Lademeter mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BAZ Axa VSC1 3000 BJ 1986

BAZ DMC 850 V BJ 2016 3 Axle

BAZ DMU 60E BJ 1998 3 axle

CNC Vertical Machining Center HERMLE C 400 U With track control Heidenhain TNC 640 Year of Make: 2016 Travel distances : X 850 Y 700 Z 500 Speed range : 20 – 18,000 rpm infinitely variable With the following accessories: NC Swivel Rotary Table Ø 650 mm x 540 mm ( T Slots for SRT ) Vertical tool changer with 38 magazine positions Additional Magazine 43 Magazine Slots ( ZM 43) KinematicOpt Hardware IKZ 40 bar with paper belt filter Sealing air for scales Police filter IKZ 40 bar Scraper belt conveyor Chip wagon 450 Ltr. Coolant Facility ́ Blow-off device Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electronic handwheel Tool Measurement BLUM Laser 3 D Probe Heidenhain Chip rinsing gun Oil mist extraction Control cabinet cooling unit ( RITTAL) 4 Pieces Height Adjustable Machine Shoes Operati ...

ANGER HCP 203 Production GENERAL Project No.: 905739 Quantity: 2 pcs. Manufacturer: ANGER Type: HCP 203 Control: Siemens 840 D Year of manufacture: 2005/2013 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION There are 2 production lines available. Each production line consists of three ANGER multi-spindle machining centers, each of which is connected to a KUKA robot. The loading and unloading of the EWAB conveyor belt is located at the back of the machines. ANGER (1) - 5-axis: 4 vertical milling and drilling spindles at the bottom, 4 vertical milling and drilling spindles at the top, touch probe at the top, 4 horizontal milling and drilling spindles at the left. Workpiece carrier with three linear axes and two rotation axes. ANGER (2) - 5-axis: 4 vertical milling and drilling spindles at the bottom, 6 vertical milling and drilling spindl ...

bore capacity in steel (diameter): mmthroat: 290 mmbore stroke: 180 mmtotal power requirement: 1,9 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z: 1000mm/600mm/600mm, feed rate: 30m/min, rapid traverse: 30m/min, table dimensions X/Y: approx. 1200mm/600mm, max. table load: 800kg, tool stations: 24, tool holder: SK40, speed: 8000rpm. Machine dimensions X/Y/Z: approx. 3000mm/3500mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10346h, spindle hours: approx. 10346h. Includes a compact filtration system Interlit SUK 200/550, year of manufacture: 2000. The machine is equipped with a new control system. Documentation available. An on-site inspection is possible.

bore capacity in steel (diameter): 60 mmCenter of spindle to wall or column: min./max. 320 - 160 mmspindle turning speed range: 20 - 2.500 U/minquill stroke: 310 mmtotal power requirement: 4 kWweight of the machine ca.: 4.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-axis machining centre with automatic 8-fold tool changer for aluminium or PVC profiles Max. travel X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm Control system E 500 Speed infinitely variable up to 6,000 rpm Hand-held control unit Minimum quantity spraying Double-sided angle head and a high-speed spindle Tensioner detection 8 pneumatic material tensioners Light barrier

Radial drill Manufacturer: Valmer Type: TR 80/2500 SP Year of Make: 2006 Table dimensions: 1,000 x 800 x 560 mm Drilling diameter max.: 80 mm Max. tap diameter: 42 mm Max. spindle axle/column distance: 2,500 mm Max. distance between spindle axle and column: 500 mm Head movement horizontally: 2,000 mm Max. distance between spindle nose and working surface: 2,000 mm Distance between spindle nose and working surface min.: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg

x-travel: 1800 mmy-travel: 700 mmz-travel: 700 mmcontrol: Heidenhain iTNC 530 table surface area: 2100 x 700 mmtable load: 1500 kgturning speeds: 20 - 18000 U/mintaper ISO: SK 40 spindle motor: 35 / 25 kWrapid traverse: 40 m/mintool change unit: 60 -fachdimensions of the machine ca.: 5,5 x 3,5 x 2,7 mtotal power requirement: kWweight of the machine ca.: 14 t- Control Heidenhain iTNC 530- 5-axis- Fixed table with integrated rotary table dia. 750mm (500kg)- IKZ 40 bar- Tool changer 60-fold (SK 40)- Milling head with B-axis- Chip conveyor- Spray gun- 3d Quick Set- BLUM laser measuring system- Direct distance measuring system- 2 Rotary Clean Windows-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 580 mmz-travel: 580 mmcontrol: SEICOS 16M B-axis (table): 360 x 1° mmfeed X/Y/Z/-axis: 1 - 50.000 mm/minrapid traverse X/Y/Z: 50,00 m/minturning speed range - stepless: 35 - 12.000 Nmspindle drive: 22,00 kWmax. torque on the spindle: 236 tool taper: BT40 toolpiece magazine: chain magazine: 61 Stücksize of pallet: 2x 400x400 mmmax. workpiece diameter: 630 mmworkpiece height max.: 680 mmworkpiece weight max.: 400 kgtotal power requirement: 30,00 kWweight of the machine ca.: 12,00 tdimensions of the machine ca.: 4,00 x 3,50 x H3,00 mWith SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deckel Maho DMC63V BJ 2009 ( incl. new milling spindle + Y-spindle ) Heidenhain Control

Type: Lid Maho DMU35M Year of Make: 2003 Description: Spindle 20-6300rpm 10kW SK40 Feed speed X,Y,Z 5000mm/min Position tolerance (direct measuring system) 0.010mm Travel: X=350mm, Y=240mm, Z=340mm Other: Tool clamping pneumatic Rotary table with swivel axis manual Weight 1600kg Operating hours approx. 4000h Control Siemens NC810D Unfortunately, the tool spindle has a bearing damage and is therefore only able to run to a limited extent.

BAZ Wagner Eumach EBM 3200 BJ2009

4-axis CNC horizontal milling machine Hüller Hille BlueStar5 built in 2007 automatic pallet changer with 2 interchangeable pallets with 4 vices each (125), 4 additional interchangeable pallets (one with mineral casting clamping tower), Renishaw measuring system, high-pressure coolant system with additional filter device, coolant and air through the spindle, 40-fold tool magazine BT40, Operating hours and control see photo

BAZ Heckert H55 (4 axle) BJ 2019

bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 150 mm: MK 4 : 480 x 480 mm: 0,1 - 0,2 mm/U: M 22 (St 60) : 35 mm: 80-1170 U/min: 2,3 kW: 350 kg: 800 x 1000 x 2000 mmAccesories:-Machine light (built-in)-Coolant device in the foot (built-in)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional