boring mills and machining centers used for sale (3,202)

Travel X/Y/Z: 2000mm/600mm/800mm, rapid traverse: 30m/min, feed rate: 30m/min, max. spindle speed: 9000rpm, tool holder: SK40, tool positions: 48, clamping plate: 650×2500mm, control: Bosch Type 3 OSA. Documentation available. An on-site inspection is possible.

Key data: 1800 mm, 2100 mm, 1250 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 210 P Year of construction: First commissioning June 2017 Condition: very good – machine set to half tolerance Control: Name: Heidenhain iTNC 530 HSCI Handwheel: Heidenhain HR 520 FS Technical data: • Spindle: 20-12000 rpm // 457 Nm – spindle with increased torque • CNC rotary table Ø 1700 mm • Table load: 8000 kg • B-axis (infinitely variable) • 120x WZW • HSK-A 100 interface • IKZ (internal coolant supply) 80 bar – frequency-controlled • 980 l coolant tank with paper belt filter • Zero-point clamping system incl. extensive accessories – pots, spigots, matching clamping plates, etc. • Chip conveyor • Rinsing gun • Infrarottprobe • Blumlaser • MPC – Machine Protection Control The machine is in very good c ...

Key data: 3000 mm, 800 mm, 1000 mm

Universal machining center Travel x/ y/ z = 3000 / 800 / 1000 mm Spindle speed up to 15000 1/min Spindle drive power 30 KW - 190 Nm Tool magazine 48 Tool positions HSK 63 max. tool diameter 70/ 130 mm max. tool length 340/ 450 mm Max. table load 1500 kg Machine weight approx. 17500 kg - Pendulum operation - Coolant system - Chip conveyors - CNC control Heidenhain iTNC 530 - Integrated rotary table - Swivelling milling head horizontal/vertical

Key data: 50 mm, 1600 mm

Radial drilling machine max. drilling diameter in steel 50 mm max. drilling diameter in cast iron 60 mm max. thread in steel M50 x 1.5 Spindle projection 1600 mm max. distance spindle nose to lower part plate 1505 mm max. boom height adjustment 875 mm Max. drill carriage adjustment on boom arm 1280 mm Taper of spindle Morse 5 Spindle stroke 310 mm Spindle speed infinitely variable 12 Spindle speed range 28 - 2500 1/min Max. torque 310 Nm Base plate 1820x986 mm Machine weight approx. 4550 kg

EDEL CYPORT CP 3020 – 5-Axis CNC Gantry Machining CenterTechnical Data:Gantry clearance height: 1,380 mmTable size: 5,000 × 2,300 mmA-axis: ±110°C-axis: ±360°Spindle power: 27 kWSpindle torque S1: 130 NmSpindle torque S6: 170 NmIKZ: up to 40 barWorkpiece measuring system: M&H with wireless probeCoolant system: with band filterDirect measuring systems: in all linear axesAutomatic central lubricationSpindle coolingEthernet interfaceSafety features: safety bumper, light grid, and lamella curtains

Key data: 1000 mm, 1000 mm, 1000 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMC 100 U duoBlock Year of Make: 2006 Condition: Very good  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 18000 rpm, infinitely variable • HSKA-63 interface • 180x WZW • 2-fold pallet changer • Pallet size: 1000 mm x 800 mm • NC swivel rotary table • IKZ (internal coolant supply) 40 bar • Chip conveyor • Coolant tank with paper belt filter Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 730 mm, 560 mm, 560 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 60 monoBlock Year of Make: 2006 Condition: Good  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 20-18000 rpm, infinitely variable • HSK-A63 interface • 60x WZW • Rotary table Ø 600 mm (C-axis) integrated into 1000 mm x 600 mm • B-axis (infinitely variable) • IKZ (internal coolant supply) 40 bar • 600 l cooling lubricant tank with paper belt filter • Chip conveyor • Rinsing gun • Oil and emulsion separation plant • Blowing air through spindle center Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 1000 mm, 900 mm, 700 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 100 eVo Year of Make: 2013 Condition: Very good – machine partially overhauled in 2023  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 18000 rpm, infinitely variable • HSK-A63 interface • 60x WZW • Swivel rotary table 950 mm x 800 mm • B-axis 5°/+110° • C-axis 360° • IKZ (internal coolant supply) 40 bar • 600 l coolant tank with paper belt filter • Chip conveyor • Rinsing gun • Blowing air through spindle center Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 800 mm, 800 mm, 800 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 80 P duoBlock Year of Make: 2006 Condition: Good  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 18000 rpm, infinitely variable • HSK-A63 interface • 120x WZW • B-axis (infinitely variable) • C-axis • Table size: 900 mm x 700 mm • Table load: max. 1400 kg • IKZ (internal coolant supply) 40 bar • Chip conveyor • Coolant tank with paper belt filter Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Two Willemin-Macodel W 408 and four Willemin-Macodel W 408S are available, year of manufacture W 408: 1997, 2002, year of manufacture W 408S: 2005, 2006, 2007, 2008, an on-site inspection is possible.

Number of axes: 3, control: FANUC, connected load: 10kVA, weight: 3.7t, an on-site inspection is possible.

Controls: EIP, voltage: 230V, connected load: 3kVA, with CE marking. An on-site inspection is possible.

A Mikron CNC universal machining center in need of repair is offered. Operating voltage: 400V, frequency: 50Hz, rated current: 40A, control voltage: 24V DC, control: Heidenhain TNC 426, weight: approx. 5800kg. The tool changer is defective and the hydraulic accumulator is empty or defective. The machine has been used in production in single-shift operation with these limitations in recent years. The tools were changed manually, otherwise the machine can be operated. An on-site inspection is possible.

Key data: 1760 mm, 600 mm, 800 mm

Control: Name: Heidenhain iTNC 530 Technical data: • Spindle: 10000 rpm • Swivel head: -90° to +90° • 22-fold tool changer • Table size: 2380 mm x 600 mm • Internal coolant supply (IKZ) • Chip conveyor • Coolant system Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

CNC Machining Center Hedelius Forte 65 Single 1320 Control: Heidenhain TNC 640 Year of Make: 2019 Availability: in stock Internal machine no. 74 Travels: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area 1,500 x 650 mm Table load: approx. 1,200 kg Mount: HSK 63 Tool magazine: 65 compartment Spindle speed: 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - IKZ 25 bar - Chip conveyors - 1x Rinsing gun - Electronic handwheel

CNC Machining Center Hedelius Forte 7-2600 Magnum Control: Heidenhain TNC 640 Year of Make: 2020 Availability: in stock Internal machine no. 73 Travels: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Pendulum operation: 2 x 1,000 mm Total clamping surface 2x 1,490 x 750 mm Table load: approx. 2,500 kg Mount: HSK 63 Tool magazine: 50 compartments Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - Chip conveyors - 2x dishwashing gun - Electronic handwheel - Partition wall prepared - High pressure pump 60bar - 0-point clamping platens - Vises and tools as required - Prepared for work space partition wall

Key data: 4000 mm, 1200 mm, 800 mm

Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 20-7000 rpm • A-axis: - 181° to + 10° • 60-fold tool changer • SK50 interface • NC rotary table: Ø 1500 mm • Table size: 4150 mm x 1500 mm • Internal coolant supply (IKZ) • Chip conveyor • Signal light Machine has approx. 28,000 program running hours Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

BAZ Hermle U630T BJ 1998

Column Drill

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Drill chuck -Hydraulic clamping -Documentation Dimensions: LxWxH 2x1.7x1.9 meters / Weight 1900Kg

X-axis: 500mm, connected load: 30.8kVA, length: 1624mm, width: 1560mm, height: 2829mm, weight: 2.4t, operating hours: 8,840h, power-on time: 89,352h, total operating hours: 28,840h, an on-site inspection is possible.

spindle diameter: 115 mmx-travel: 2000 mmy-travel: 1200 mmcontrol: Heidenhain TNC 355 Lotse z-travel: 1200 mmw-axis: 590 mmtotal power requirement: 48 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmWork spindle (right)Spindle bore45 mmSpindle diametre on front bearing90 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Sha ...

IMPORTANT - PLEASE READ If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes dismantling and transport INFORMATION TO FOLLOW

Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmGeneral2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® multi-touch control Work spindle (right)Spindle diametre on front bearing90 mmSpindle bore45 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Sha ...

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmWork spindle (right)Spindle bore45 mmSpindle diametre on front bearing90 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Shank diametre according to D ...

Key data: 950 mm, 460 mm, 460 mm

Technical data: Manufacturer: Spinner Type: VC750-XL Year of manufacture: 2018 Control: Siemens 840DE SolutionLine V2 Travel: X 950 mm Y 460 mm Z 460 mm Rapid traverse: 36 m/min Working spindle Speed: 12,000 rpm Power: 11 kW (S6/40%) Tool/movement Tool taper: size 40 according to DIN 69871-A Tightening bolts: according to DIN 69872-A Tool changer: 32-fold Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: Multi-function control panel with handwheel and integrated display Chip Conveyor V2 VC750-XL Oil mist extraction Preparation for high-pressure flushing High-pressure flushing 22 bar (additional tank) Blow-out device for spindle taper Compressed air cooling nozzle on the headstock Option package "Shopmill programming" Preparation of interface for Blum infrared probe TC50/TC52/TC54-20 Linear gui ...

Key data: 640 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 64 V linear With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 640 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions 3D Probe Renishaw Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

Key data: 30 mm, 700 mm

Radial drilling machine Manufacturer Danube Type DF130 / Danuflex 130 Digital Year of construction 2003 Spindle speed 40 - 3600rpm Feed rate 0.05 - 0.55 mm/rev Column diameter 170mm Quill stroke 170mm Table size 630 x 1200mm Table load 1000kg with 3D button Heidenhain Instruction manual available.

Control OSP 100U Travel X/Y/Z: 560 x 610 x 560 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 60 Wkz., SK 40 Chip conveyor d