boring mills and machining centers used for sale (3,252)

bore capacity in steel (diameter): 18 mmthroat: 225 mmbore stroke: 110 mmtable-size: 430x345 mmspindle turning speed - stepless: 135-4500 U/minDigital read-outTapping attachmentCross table 530x255mmMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 762 mmy-travel: 508 mmz-travel: 508 mmB-axis (table): +120/-35 Gradc-axis: 360 Gradcontrol: HAAS für 5 Achsentool piece magazine with: 40 Plätzennumber of spindle speeds: 12000 U/mindimensions of the machine ca.: 4.3 x 2.35 x 2.8 mweight of the machine ca.: 8.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NEW - Electronics 230V from spare parts warehouse.

NEW - Electronics 230V - from spare parts warehouse.

NEW electronics 230V - TB09050-1 - from spare parts warehouse

NEW - TB08148-1 - Electronics 230V from spare parts warehouse.

NEW drill motor with MK3 mount. Performance data according to type plate. The machine comes from a spare parts warehouse.

Key data: 35 mm

New drill motor 230V - Part No. TB02752

Series No.: 12661418 Year of construction: 10/1998 rpm: 65 – 2000 Cone: MK3 Country of origin: Taiwan

Model: 25tm Power supply: 380 V / 50 Hz Speeds: 2 Country of origin: Italy

Machine No.: 306916 Type: U1 Combi Volts: 380 V Power: 3 phase / 50 Hz / 1.5 kW Revolutions: 1415 rpm. Country of origin: Sweden Weight: 760 kg

Machine No.: 311615 Type: U1 Volt: 380V Power: 3 phase / 50 Hz / 1.5 kW Revolutions: 1415 rpm. Country of origin: Sweden Weight: 310 kg

Machine No.: 405823 Drilling capacity: D25 mm Projection: 255 mm Drilling depth: 135 mm Tool holder: MK3 Engine power: 0.65 / 0.9 kW Speeds: 8 / 105 – 2900 rpm Table: 500x400 mm Weight: 180 kg

S. No.: 238828

Specifications Model: 25 lpv Tool holder: MK3 Pinole stroke: 110mm Projection: 400mm Drive: 3 phase motor with 2 motor stages and V-belt drive Speeds 14 / 35 – 65 – 70 – 125 – 130 – 200 – 250 – 335 – 400 – 570 - 670 – 1140 – 990 – 1980 rpm Table dimensions: LxW 330x330mm Machine dimensions: LxWxH 410x700x1830mm On the machine, we installed a new motor and renewed the entire electrical system with the step and motor circuit breaker as well as the cables.

Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...

For sale used angle head, angle milling head ŠKODA

Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm . X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &aci ...

Technical data: working surface: 2500 x 3000 mm Table load: 30 to. The mounting pad height: 240 mm Number of T-slots: 10 Rotation speed: 0.008 ? 0.45/rpm Power: 7,5 kW

Tischaufspannflaeche Max Tischbelastung 25 to . groove distance 180 mms table movement 1,000 mms table rotation B axis 360? Aufspannflaeche 1600 x 2,500 mms number of the grooves 9 table overtakes completely in 2012 anew SIEMENS impulses, new MOOR GROVE graduations

Technical data: 2009 overtaken Table load: 100 to. Table diameter: 3500 mm Table diameter with extension arms: 6000 mm Plan disc: 8 double T-slots Slot distance: 180 mm incl. 8 extension arms to increase the diameter of the washer to 6000 mm.

Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW

Manufacturer: AXA Model No.: DBZ Year: 2007 Condition: Used Stock number: 9465 Work table length: 1350 mm Work table width: 600 mm Number of axes: 4 pieces X-axis travel: 2x 750 mm Y-axis travel: 550 mm Z-axis travel: 600 mm In 2022, GO was carried out. Equipment: Technical documentation Chip conveyor Round Table Workpiece feeding Workpiece Remover Handwheel 2x hydraulic power unit for vices

Manufacturer: Hedelius Model: Forte 7 Condition: Used Stock number: 9457 Control system: Siemens Sinumerik Switch-on hours: 2682 h Operating hours: 640 h Work table length: 3080 mm Work table width: 700 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 18000 1/min X-axis travel: 2600 mm Y-axis travel: 700 mm Z-axis travel: 800 mm Number of all tools: 45 pieces

Key data: 105 mm, 1800 mm, 1250 mm

Control Heidenhain ... TNC 430 Spindle diameter ... 105mm Axis X ... 1800mm Axis Y ... 1250mm Spindle speed ... 0-3300 rpm Axis W ... 630mm Axis Z ... 1250mm ISO 50 Max. table load ... 4000kg Clamping table surface ... 1250 x 1400mm The machine is in good condition, possible to test under power.

Key data: 1040 mm, 600 mm, 500 mm

Manufacturer: DMG Model: DMC 104V linear Year: 2006 Condition: Used Stock number: 9445 Control system: HEIDENHAIN iTNC 530 Switch-on hours: 60797 h Hours: 23735 h Work table length: 1250 mm Work table width: 600 mm Maximum table load (uniform): 800 kg Maximum spindle speed: 12000 1/min X-axis travel: 1040 mm Y-axis travel: 600 mm Travel Z axis: 500 mm Cone: SK 40 Tool magazine capacity: 30 Machine height: 2800 mm Machine length: 4060 mm Machine width: 2450 mm Machine weight: 8800 kg Equipment: Air conditioning in the electric cabinet Spindle temperature Oil mist extraction Workpiece Probe

Key data: 460 mm, 510 mm, 560 mm

Manufacturer: Kitamura Model: MYCENTER HX 300 iG Year: 2018 Condition: Used Stock number: 9444 Work table length: 305 mm Work table width: 305 mm Maximum spindle speed: 15000 1/min Number of axes: 4 pieces X-axis travel: 460 mm Y-axis travel: 510 mm Travel Z-axis: 560 mm Max. tool diameter: 95 mm Max. tool weight: 10 kg

Manufacturer: HAAS Model: VF 4SS Year: 2017 Condition: Used Stock number: 9443 Control system: HAAS Work table length: 1321 mm Work table width: 495 mm Spindle drive power: 22.4 kW Maximum vertical spindle speed: 12000 1/min X-axis travel: 1270 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Machine weight: 6087 kg Equipment: 2x double 5th axle

Manufacturer: HAAS Model: VF 2SS Year: 2014 Condition: Used Stock number: 9442 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 4. Axis

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS Year: 2013 Condition: Used Stock number: 9441 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 2x double 4th axle