boring mills and machining centers used for sale (3,202)

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model No.: VF-2DHE Year: 2005 Condition: Used Stock number: 9515 Maximum vertical spindle speed: 7500 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Number of stacking positions: 20 pieces Machine weight: 3500 kg

The machine is in good technical condition; testing is possible by prior arrangement. + Accessories: Chip auger, programmable coolant nozzle, power failure detection module, remote jog handle with color LCD, rigid tapping, 15,000 rpm spindle (ISO 40 taper), 30 hp (22.4 kW) vector drive, inline direct drive, intuitive Renishaw wireless probe system, 2x machine vise, 30x tool holder.

The machine is in good technical condition; it can be tested by prior arrangement.

The machine is in good technical condition; testing is possible by prior arrangement. A probe is included.

The machine is in good technical condition; testing is possible by prior arrangement. X-axis travel: 850 mm; Y-axis travel: 700 mm; Z-axis travel: 500 mm. Table dimensions (LxW): 10; load capacity: 2000 kg. Rapid traverse (XYZ/BC): 35 m/min. Spindle head: HSK-A63; speed: 0–18,000 rpm; spindle motor power: 20 kW. Tool positions: 38. Control system: Heidenhain TNC 640. Air through spindle. Heidenhain TS460 touch probe. Electronic handwheel. Approx. 20 HSK-A63 tool holders (in the changer). Manual cabin roof. Preparation for mist extraction system. Wash-down gun. Original HERMLE + Heidenhain documentation.

The machine is in good technical condition; testing is possible by prior arrangement. TNC530, HSK63, 12,000 rpm, 28-position tool magazine, 40-bar through-spindle coolant (IKZ), laser tool breakage detection.

The machine is in good technical condition; testing is possible by prior arrangement. Fully equipped, with tooling and accessories valued at approx. 1 million. X-axis travel: 1050 mm; Y-axis travel: 900 mm; Z-axis travel: 600 mm. Control system: Heidenhain TNC 640. Max. spindle speed: 18,000 rpm. Table clamping surface: 900 x 750 mm. Tool positions: 42. Tool holder: HSK 63A. Max. tool diameter: 80 (125) mm. Max. tool length: 225 mm. Max. tool weight: 8 kg. T-slots – width: 18 mm; spacing: 100 mm. Center bore: 32 mm. Rotation range: 360°. Tilt range: +/- 115°. Max. table load: 1500 kg. Rapid traverse (X/Y/Z): 35/35/35 m/min. Operating hours: approx. 8,500 h. Spindle hours: approx. 2,500 h. Machine weight: approx. 15 t.

Manufacturer: Pinnacle Model: VMC 2000S Year: 2015 Condition: Used Stock number: 9499 Control system: HEIDENHAIN Work table length: 2200 mm Work table width: 850 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 2000 mm Y-axis travel: 900 mm Travel Z axis: 850 mm Machine weight: 16000 kg

Manufacturer: AWEA Model No.: A+1600 Year: 2011 Condition: Used Stock No: 9497 Control System: FANUC Series 18i-MB Switch-on hours: 1727 h Operating hours: 374 h Work table length: 1700 mm Work table width: 800 mm Maximum table load (uniform): 2000 kg Spindle drive power: 20 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Cone: BT 50 Number of all tools: 24 pieces Machine weight: 15000 kg

Manufacturer: MORI SEIKI Model No.: SH 633 Year: 1999 Condition: Used Stock number: 9496 Control system: MORI SEIKI MSG-502 Work table length: 700 mm Work table width: 500 mm Maximum table load (uniform): 1200 kg Maximum spindle speed: 10000 1/min X-axis travel: 840 mm Y-axis travel: 760 mm Travel distances Z-axis: 840 mm Machine weight: 18500 kg

Manufacturer: HYUNDAI KIA Model: VX 500 Year: 2007 Condition: Used Stock number: 9495 Control System: FANUC Series 21i-MB Work table length: 1200 mm Work table width: 500 mm Spindle drive power: 11 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 1090 mm Y-axis travel: 510 mm Z-axis travel: 635 mm Machine weight: 7000 kg

Manufacturer: FERMAT Model: VMF 1000 CNC Year: 2008 Condition: Used Stock number: 9494 Control System: FANUC Series Oi-MC Switch-on hours: 25998 h Work table length: 1300 mm Work table width: 600 mm Spindle drive power: 15 kW Speed: 10000 1/min X-axis travel: 1006 mm Y-axis travel: 598 mm Z-axis travel: 600 mm Machine weight: 5000 kg

Manufacturer: YCM Model: XV 560 A Year: 2011 Condition: Used Stock number: 9493 Control system: FANUC MXP-100FA Switch-on hours: 11362 h Operating hours: 3460 h Work table length: 700 mm Work table width: 420 mm Spindle drive power: 11 kW Maximum vertical spindle speed: 10000 1/min X-axis travel: 560 mm Y-axis travel: 410 mm Travel Z axis: 450 mm

The machine is in good technical condition; testing is possible by prior arrangement. It is designed for machining parts made of wood, plastic, and composite materials. It features the Siemens SINUMERIK 840D/810D control system.

Manufacturer: AXA Model No.: DBZ Year: 2007 Condition: Used Stock number: 9465 Work table length: 1350 mm Work table width: 600 mm Number of axes: 4 pieces X-axis travel: 2x 750 mm Y-axis travel: 550 mm Z-axis travel: 600 mm In 2022, GO was carried out. Equipment: Technical documentation Chip conveyor Round Table Workpiece feeding Workpiece Remover Handwheel 2x hydraulic power unit for vices

Manufacturer: Hedelius Model: Forte 7 Condition: Used Stock number: 9457 Control system: Siemens Sinumerik Switch-on hours: 2682 h Operating hours: 640 h Work table length: 3080 mm Work table width: 700 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 18000 1/min X-axis travel: 2600 mm Y-axis travel: 700 mm Z-axis travel: 800 mm Number of all tools: 45 pieces

Key data: 105 mm, 1800 mm, 1250 mm

Control Heidenhain ... TNC 430 Spindle diameter ... 105mm Axis X ... 1800mm Axis Y ... 1250mm Spindle speed ... 0-3300 rpm Axis W ... 630mm Axis Z ... 1250mm ISO 50 Max. table load ... 4000kg Clamping table surface ... 1250 x 1400mm The machine is in good condition, possible to test under power.

Key data: 1040 mm, 600 mm, 500 mm

Manufacturer: DMG Model: DMC 104V linear Year: 2006 Condition: Used Stock number: 9445 Control system: HEIDENHAIN iTNC 530 Switch-on hours: 60797 h Hours: 23735 h Work table length: 1250 mm Work table width: 600 mm Maximum table load (uniform): 800 kg Maximum spindle speed: 12000 1/min X-axis travel: 1040 mm Y-axis travel: 600 mm Travel Z axis: 500 mm Cone: SK 40 Tool magazine capacity: 30 Machine height: 2800 mm Machine length: 4060 mm Machine width: 2450 mm Machine weight: 8800 kg Equipment: Air conditioning in the electric cabinet Spindle temperature Oil mist extraction Workpiece Probe

Key data: 460 mm, 510 mm, 560 mm

Manufacturer: Kitamura Model: MYCENTER HX 300 iG Year: 2018 Condition: Used Stock number: 9444 Work table length: 305 mm Work table width: 305 mm Maximum spindle speed: 15000 1/min Number of axes: 4 pieces X-axis travel: 460 mm Y-axis travel: 510 mm Travel Z-axis: 560 mm Max. tool diameter: 95 mm Max. tool weight: 10 kg

Manufacturer: HAAS Model: VF 2SS Year: 2014 Condition: Used Stock number: 9442 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 4. Axis

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS Year: 2013 Condition: Used Stock number: 9441 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 2x double 4th axle

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS Year: 2012 Condition: Used Stock number: 9440 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 4. Axis

Manufacturer: DOOSAN Model: DNM 400 A Year: 2011 Condition: Used Stock number: 9438 Control system: FANUC Work table length: 920 mm Work table width: 435 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 435 mm Travel Z-axis: 510 mm Machine height: 2509 mm Machine length: 2093 mm Machine width: 1962 mm Machine weight: 5000 kg

Key data: 90 mm, 1250 mm, 900 mm

Manufacturer: TOS Model No.: WHN 9B Condition: Used Stock number: 9427 Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg X-axis travel: 1250 mm Y-axis travel: 900 mm Travel Z axis: 1000 mm Machine weight: 12000 kg

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS HE Year: 2007 Condition: Used Stock number: 9426 Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Tool magazine: 24 pieces Maximum vertical spindle speed: 8000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Cone: ISO 40 Equipment: Pallet system

Key data: 2134 mm, 1016 mm, 762 mm

Manufacturer: HAAS Model: VF 9 Year: 2008 Condition: Used Stock number: 9399 Control system: HAAS Work table length: 2134 mm Work table width: 914 mm Maximum table load (uniform): 1814 kg Maximum vertical spindle speed: 8100 1/min X-axis travel: 2134 mm Y-axis travel: 1016 mm Travel Z axis: 762 mm Machine weight: 12837 kg 2025: Spindle replacement

Key data: 1016 mm, 610 mm, 1032 mm

Manufacturer: TRENS Model: MC 100 VA Year: 2002 Condition: Used Stock number: 9396 Control system: Heindenhein 426 Switch-on hours: 108857 h Hours: 41979 h Work table length: 1080 mm Work table width: 580 mm Maximum table load (even): 1000 kg Maximum spindle speed: 8000 1/min X-axis travel: 1016 mm Y-axis travel: 610 mm Travel Z axis: 1032 mm Workpiece spindle drive power: 11 kW Machine height: 2950 mm Machine length: 3280 mm Machine width: 2260 mm Machine weight: 6200 kg

Key data: 600 mm, 500 mm, 450 mm

Manufacturer: Mikron Model UME 600 TNC 360/4xx Year 1996 Condition Used Stock number 9378 Maximum vertical spindle speed: 5000 1/min X-axis travel: 600 mm Y-axis travel: 500 mm Travel Z axis: 450 mm Machine height: 2000 mm Machine length: 2200 mm Machine width: 2800 mm Machine weight: 3550 kg

Key data: 1270 mm, 610 mm, 720 mm

Manufacturer: MAS Model MCV 1270 POWER Year 2018 Condition Used Stock number 9375 Control system: HEIDENHAIN TNC 640 Switch-on hours: 20815 h Hours: 7638 h Work table length: 1500 mm Work table width: 670 mm Maximum table load (uniform): 1200 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Cone: ISO 50 Number of all tools: 40 pieces Machine height: 3330 mm Machine length: 5000 mm Machine width: 4165 mm Machine weight: 12200 kg

The machine is in good technical condition; testing is possible by prior arrangement. It includes equipment and, where applicable, accessories (holders, tools, etc.). Complete, verifiable service history.