boring mills and machining centers used for sale (3,245)

Delta Drill with Internal CoolingSANDVIKTM411.5-207629Diameter: Ø 12.25 mm420279013K20Holder: Ø 32 mmNew !Dimensions: 170 x 32 x 32 mm

Delta Drill with Internal CoolingSANDVIKTM411.5-207628Diameter: Ø 10.25 mm420279012K20Holder: Ø 32 mmNew !Dimensions: 160 x 32 x 32 mm

Delta Drill with Internal CoolingSANDVIKTM411.5-207632Diameter: Ø 20.25 mm420279019K20Holder: Ø 32 mmused, tested ! Dimensions: 180 x 32 x 32 mm

Internal Cooling Twist DrillDORMERA512 HSCO ADX 18.25 ( A512HSCOADX18.25 )Diameter: Ø 18.25 mmPickup: Ø 20 mNew !Dimensions: 200 x 20 x 20 mm

Twist drill bit with internal coolingDORMERA512 HSCO ADX 18.25 ( A512HSCOADX18.25 )diameter: Ø 18.25 mm holder: Ø 20 mused, tested ! Dimensions: 200 x 20 x 20 mm

Deep Hole Drills, Gun Drills with Internal CoolingGÜHRINGZL-TLB-1-RU ZFX54,02 20diameter: Ø 8.0 mmTotal length: 700 mmgroove length: 620 mmShank diameter: Ø 25 mmShank length: 80 mmNew !Dimensions: 700 x 25 x 25 mm

Deep hole drills, gundrilling drills with internal coolingPAGUSTBT Ø 10,000 15 x 480 ( TBTØ10,15x480 )K15 C4051/07Diameter: Ø 10,15 mmTotal length: 490 mmGroove length: 400 mmShank diameter: Ø 16 mmShaft length: 50 mmNew !Dimensions: 490 x 16 x 16 mm

Twist drillHOMMELHSS, DIN 345, Type N, ( HSS,DIN345,TypN, )Diameter: Ø 32 mm10510287New !Dimensions: 340 x 38 x 38 mm

Twist drillGARANT11580 HSS ( 11580HSS)Diameter: Ø 29 mmNew !Dimensions: 580 x 30 x 30 mm

Step drill with internal coolingGÜHRINGdiameter: Ø 25.0 x 14.5 x 17.0 mmsolid carbide DK480UFshank: Ø 25 mmwith internal cooling !New !Dimensions: 120 x 25 x 25 mm

Step drill with internal coolingGESAUdiameter: Ø 14.5 x 23.5 / 120° x 25 x 110 ( Ø14.5x23.5/120°x25x110 )shank: Ø 25 mmwith internal cooling !New !Dimensions: 110 x 25 x 25 mm

Step drill bit with internal coolingGÜHRINGdiameter: Ø 25.0 x 14.6 x 17.0 mm ( Ø25.0x14.6x17.0mm )solid carbide DK480UFshank: Ø 25 mmwith internal cooling ! ground !, Dimensions: 120 x 25 x 25 mm

Boring tool, special accessoryWMWTGL 32680 ( TGL32680 )TGL 30-1201shank: Ø 20 mmadapter: Ø 8, 10, 12 mmin wooden boxused, tested ! Dimensions: 185 x 120 x 60 mm

Manufacturer: OKUMA Model : Eurocenter V50 Year of construction : 2007 Operating hours: 11465 Accessories: dividing head, coolant tank with pump. Voltage: 400 V Phases: 3 Phase Frequency: 50 Hz Current: 28 A Power: 32 kW Fuse Rating: 45 A Certification: CE marked Find more here - / Contact us at -

MAKA Systems GmbH Type: PA 37 Year of construction: 2006 Machining length: 11 m Operating hours: 23.792 Spindle exchange: 08/2018 MAKA CNC 5-axis machining center PA 37 for machining of aluminum profiles and (with clamping surface to be realized clamping surface) for aluminum sheets / plates. machining. Version with NC support crosshead positioning and with widened machine base frame to accommodate the required required drag chains, and with hydraulic workpiece clamping. Machine in travelling gantry design with drive on both sides (gantry drive). CNC-control BWO 930 in mobile operating- for 5-axis milling with RTCP function, memory 1 mB, with integrated PC with low power processor 1 GHz, hard disk 120 gB, with Windows-XP, 10" touch-screen display with touch-screen computer keyboard. Connections: 1 x VCS for screen, 4 x USB, 1 x mouse, 1 x keyboard, 1 x RS 232,  ...

Tischbohrmaschine / Drilling machine IXION BST 13 Baujahr / Year 1971 - Serial-No. 37919 Technical Details: Abmessungen / Dimensions 220 x 400 x 820mm Gewicht / Weight 50kgs Online-Video-Inspection by Skype-VideoWe would be very pleased with your visit - more machines on StockAvailable Immediately - Can be inspectOn Stock Emskirchen / Nürnberg - Can be test

Key data: 500 mm, 250 mm

Precision coordinate boring and milling machine, top condition Fehlmann, Picomax 55 CNC Control : Heidenhain TNC 407 (415) Process : 500 x 250, Z: 145 (+160 man.) W- 500mm, Table: 885x320mm, ATC 27 pos Spindle: 50 - 10000 rpm, 7kw

Machine : Tools for boring mill / radial drilling machine Type: MK5 5 drill rods φ 40 , 30, .. L- 280 – 400mm 3 extensions MK5 – MK4 , L-400-520mm 1 boring tool Oerlikon MK5, φ 70, 6-260 5 top-mounted milling mandrels MK5 - φ 16, 22, 27,32,40mm 2 Clarkson clamp chucks 1 MK5 boring tool, adjustable, φ 60mm 2 Shots 2 milling cutters: End mill roughing/plain φ 56x100mm, / groove milling cutter 4 milling cutters: 2 roughing/plain φ 40x12o, 2 roughing cutters 1 Reduction from MK5 to SK40 Weight: approx. 70kg kg PRICE : € 600,- ex works ! A - T-slot size: approx. 21.5mm, B-35, thread M20 16 T-slot nuts 20 pcs threaded rods M20, L-120 – 400mm 3 x 2 pcs clamping claws 4 nuts long, 6 nuts, washers 2 blocks for adjustment with adjustment screw 4 blocks 80 x 60 x40mm ( underlay )

Bluthardt, VRB 6/20 Drilling machine with coordinate table, with digital display DRO- 3 axis , Year of manufacture: 1980, very good condition, can be viewed under power Mounts SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, right - counterclockwise rotation, Stroke: 200mm, upper part adjustment electr. 500mm Radius : 500, Coordinate table: Clamping surface 600x400m, X-660, Y-450mm To be visited under power!

Bluthardt, VRB 6/20 Drilling machine with coordinate table, with digital display DRO- 3 axis , Year of manufacture: 1980, very good condition, can be viewed under power Mounts SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, right - counterclockwise rotation, Stroke: 200mm, upper part adjustment electr. 500mm Radius : 500, Coordinate table: Clamping surface 600x400m, X-660, Y-450mm To be visited under power!

Key data: 300 mm, 1130 mm, 300 mm

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

Holzprofi Maker Special Column Drill M1-BM4117S-Variotouch with Stepless SpeedThe brushless motor is directly controlled without a belt drive! It features an electronic control system with a combined chip and software control system. It features a touchscreen display, thread cutting device, automatic start and stop function when the spindle is operated, forward/reverse rotation, LED light, and cross-line laser.With extra robust table - also suitable for vices.Technical data:Motor power 1.6 kW (= 2 kW S6)Motor voltage 230 voltsQuill taper MT 3Quill stroke 120 mmDrill chuck 3-16 mmSpeeds 150-3200 rpmColumn diameter 80 mmTable dimensions 345 x 345 mmBase dimensions 520 x 320 mmTable tilt 90° left/right

Drilling and milling machine Hans Schreiner ZAY7040G, built in 2009, very good condition, 1.5 kW, 800 mm table length, 240 mm table width, 300 kgPrices subject to change, errors, printing and typesetting errors excepted

Drill Optimum B32, good condition, incl. MK4 mount, 225 mm stop, 125 mm quill strokePrices subject to change, errors, printing and typesetting errors excepted

For sale: AXA VSC 1 3000 M Vertical CNC machining center built in 1986 For sale is a vertical CNC machining center of the type AXA VSC 1 3000 M from 1986. The machine is designed for the precise machining of medium-sized to large workpieces and is suitable for both single part production and series production. It is characterised by its robust design, stable travelling column structure and reliable control technology. Specifications Travel X Y Z approx. 1820 mm 450 mm 480 mm Table size approx. 1900 x 450 mm Spindle speed up to approx. 8000 revolutions per minute Machine weight approx. 5500 kg Construction of the travelling column with fixed machine table Cooling Internal Cooling IKZ with Chip Conveyor Condition: used, functional, ready to be demonstrated, energized Particularities Solid machine design ideal for precise roughing and finishing Good access to the worksp ...

Key data: 25 mm

Special price 2.630,- instead of € 3.090,- excl. VAT - Exact setting of the drilling depth - Suitable for drilling and tapping (optional) - The drilling table is height-adjustable and can be rotated around the column - Made in Sweden Specifications - Drilling capacity: 25 / 28 mm - Quill stroke: 130 mm - Tapping capacity (steel / cast iron): M 16 / M 20 - Spindle holder: MK3 - Spindle speed: 129 - 1498 rpm - Gear stages: 4 - Max. distance spindle/table: 730 mm - Projection: 255 mm - Drilling table size: 500 x 400 mm - Column diameter: 100 mm - Motor power: 0.65 kW - Voltage: 400 V - Dimensions WxHxD: 500 x 1720 x 500 mm - Weight: 185 kg

Key data: 30 mm

Special price € 4,100 instead of 4,930 excl. VAT Solberga SE2030 - Gear drilling machine (new) Recording: MK3 Capacity: 30 mm - The drill head can be swivelled 360° around the column and is height-adjustable. - The gearbox is built with our traditional and tested technology for the highest possible torque. Helical gears in combination of steel and reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. - The spindle is made of steel and ensures optimal concentricity of the tool thanks to its adjustable tapered roller or ball bearing. The machine has an adjustable spindle return spring. This allows the restoring force to be adapted to the weight of the tool. - Automatic feed (M model) - When the preset drilling depth is reached, the spindle returns to its original positio ...

Key data: 5000 mm, 1600 mm

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...