lathes used for sale (3,146)

Ref. -No.: 10258Manufacturer: SCHAERERType of control: KonventionellStorage location: HalberstadtCountry of origin: GermanyLining: Forkardt F315 BrandMachine length: 3.800 mmMachine width: 1.300 mmMachine Height: 1.500 mmWeight Of The Machine Ca.: 4 tTool holder type: Multifix Typ C Turning Length: 1.800 mmTurning Diameter Over Bed: 520 mmTurning Diameter Over Slide Rest: 320 mmSpindle Bore: 62 mmBezel diameter (inside): 270 mmHole in the jaw chuck: 84 x 120 mm

Ref. -No.: 10257Manufacturer: HEIDENREICH & HARBECKYear of construction: 1981Type of control: KonventionellStorage location: HalberstadtCountry of origin: DeutschlandMachine-No.: 80-0512-0562 Turning Speeds: 20-2000 RPMMachine length: 2.900 mmMachine width: 1.200 mmMachine Height: 1.800 mmWeight Of The Machine Ca.: 3,5 tTool holder type: Multifix Typ B Turning Length: 1.000 mmTurning Diameter Over Bed: 480 mmTurning Diameter Over Slide Rest: 295 mmBezel diameter (inside): 1 x 145, 1 x 255 mm

Ref. -No.: 10229Manufacturer: GÖPPINGERYear of construction: 1953Type of control: KonventionellControl: N/aStorage location: HalberstadtCountry of origin: DeutschlandMachine length: 4700 mmMachine width: 1450 mmMachine Height: 1300 mmWeight Of The Machine Ca.: 3,1 tSupply voltage: 380 VTurning Length: 3000 mmTurning Diameter Over Bed: 530 mmCentre Distance: 3050 mmSwing Diameter Over Bed Slide: 305 mmSpindle Bore: 58 mmTotal Power Requirement: 5,5 kWCirculation in the crank: 720 mm

Ref. -No.: 10154Manufacturer: HEYLIGENSTAEDTYear of construction: 2014Retrofit: 2015Type of control: CNCControl: SINUMERIK 840D solution lineStorage location: HalberstadtCountry of origin: DeutschlandBed width: 2000 mmFeed rate: 1-5000 mm / minTurning Diameter: 2600 mmTurning Length: 10000 mmCentre Distance: 11500 mmFaceplate Diameter: 2000 mmSpindle Speeds: 0,5 - 36 min-1/20 - 140 min-1 RPMMax. Torque: 120 NmMax. Workpiece Weight: 40000 - 70000 kgTotal Power Requirement: 230 kWCross slide shift (X-axis): 640 mmFurther information:

Ref. -No.: 10036Manufacturer: JOHNFORDYear of construction: 2009Type of control: CNCControl: Fanuc Series 18i-TBStorage location: HalberstadtCountry of origin: TaiwanMachine length: 9800 mmMachine width: 3695 mmMachine Height: 5292 mmWeight Of The Machine Ca.: 32,6 tamount of positions: 12 Bar passage: 165 mmSerial no.: TDF9007 Turning Length: 2000 mmTurning Diameter Over Bed: 1550 mmSwing Diameter Over Bed Slide: 1270 mmLongitudinal Travel (Z-Axis): 2000 mmSpindle Head: A2-15 Spindle Diameter In Front Bearing: 240 mmSpindle Bore: 185 mmSpindle power: 37/30 kWCross Travel: 685 mmSpindle Speeds: 1000 RPMRapid Travel Speed X-Axis: 10 m / minRapid Travel Speed Z-Axis: 12 m / minTool changer: 12 Pcs

turning diameter: 330 mmturning length: 140x130 mmcontrol: turning diameter over slide: 140 mmtravel -x axis: 107 mmtravel -z axis: 230 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mmturning length: 508 mmx-axis: 176 mmz-axis: 520 mmcontrol: Fanuc-Series O-TD total power requirement: kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 2,73x1,98x1,64 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 750 mmturning length: 1520 mmcontrol: Fanuc 18 iT-B total power requirement: 22,0 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: 2000 mmswing diameter over bed slide: 520 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 4745 mm x 1340 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 330 mmturning length: 510 mmcontrol: FANUC 18i - T turning diameter over bed: 600 mmturning diameter over slide: 550 mmx-travel: 250 mmz - travel: 580 mmy-travel: 100 (±50) mmb-axis: 0.001 mmrapid travel x/y/z: 20/7,5/24/ m/minrapid taverse: B- Achse 20 m/minc-axis: 4.500/ 6.000 °spindle passage: 76/ 45 mmspindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/minspindle drive: 15/ 7,5 kWTurret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mmchuck: Subspindel 160 mmtotal power requirement: 50,7 kVAweight of the machine ca.: 4,9 tdimensions of the machine ca.: 3.118 x 1.705 x 2.076 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1450 mmturning diameter over slide rest: 1070 mmturning length: 7000 mmturning speeds: 2,24-450 U/minControl: faceplate: 1400 mmspindle passage: 160 mmsteady: 400 mmdrive capacity - workpiece: 63 kWTail stock:: elektr. diameter of quill: 200 mmbed width: 950 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very well preserved CNC lathe WEISSER Heilbronn, type Gigant. From precision operation, only ultra-fine machining. Details Type Gigant Machine No. 27-0166 hydraulically self-tightening fork art chuck with power clamping cylinder 4x Sauter revolver, size 400 mm2 Siemens SINUMERIK 840D fully functional Commissioning 04/2003 Travels X 725 mm (stroke), Z 1,480 mm Main spindle drive DC 45 kW (nominal power) Speeds in 3 stages up to max. 1,120 rpm a set of basic jaws inside/outside without Lynette (but can be provided for customization) incl. documentation

turning diameter over bed: 520 mmturning diameter over slide rest: 300 mmturning length: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-jaw chuckMultifix tool holder devicetail stockTechnische Daten / technical details:Drehlänge / turning lenght 1000 mmDreh-Ø über Bett / turning Ø over bed 520 mmDreh-Ø über Schlitten / turning Ø over sledge 300 mmDrehzahlbereich / spindle speed 30-1600 UpM /rpmGewicht der Maschine ca. / weight 2500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm

turning diameter: 300 mmturning length: 300 mmcontrol: Sinumerik 810D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 810D12-fold revolverbar loading device Breuning Irco Simag 42.1R (max. bar diameter 42mm)chip conveyortail stockTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 550 mmmax. Drehdurchmesser / max. turning diameter 300 mmmax. Drehlänge / max. turning lenght 300 mmX-Weg / X-travel 170 mmZ-Weg / Z-travel 335 mmmax. Stangendurchlass / max. bar diameter 45 mmDrehzahl / spindle speed 6000 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesEilgang X / rapid feed X 36 m/minEilgang Z / rapid feed Z 36 m/min.Antriebsleistung / drive capacity 20 kWGewicht der Maschine ca. / weight ca. 3500 kgTechnische Da ...

turning diameter: 820 mmturning length: 300 mmturning diameter over slide: 465 mmcontrol: max. torque on the spindle: 3000 Nmturning speeds: 5,6-1120 U/minFeed: 1-5000 mm/minRapid movement: 5000 mm/mintailstock quill taper MT: 6 3 jaw chuck Forckrath: mmsteady: mmmain drive motor: 50 kWdiameter of main spindle: 170 mmspindle passage: 128 mmtailstock quill diameter: 125 mmtailstock quill stroke: 250 mmz-axis: 3000 mmx-axis: 550 mmtotal power requirement: 52 kWweight of the machine ca.: 7,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mmturning length: 0,0 mmcontrol: Siemens 810 D working spindle speed range: 4200 U/mintravel -x axis: 210 mmtravel -z axis: 610 mmspindle passage: 65 mmtotal power requirement: 0,0 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 800 mmturning length: 3000 mmswing diameter over bed slide: xx mmtotal power requirement: xx kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Speeds: 40 - 2000 rpm Tension - lead screw Distance between centers 1 m Center height 230 mm Length 2.50 m Width 1.20 m Height 1.60 m Multifix B recording Accessories Machine unchecked

Lathe Manufacturer: Schaerer Model: UN 200 Center distance: 1600mm

Brake boring device Hunger 6.5 A 400 V System Brake drum & disc with accessories Grinding spindle Safety grilles

turning diameter: max. 320 mmturning length: 810 mmcontrol: MSX 701 MAPPS IIIstandard turning dia.: 200 mmMain spindle:: Number of revolutions: max. 6.000 min/-1power capacity - main spindel: 22 / 18,5 kWBar feed: max. 52 mmspindle bore: 61 mmC-Axis: 0,001 °Subspindel:: Number of revolutions: max. 6.000 min/-1power capacity - Sub spindle: 22 / 18,5 kWBar feed: max. 52 mmspindle bore: 61 mmC-Axis: 0,001 °Turret 1 + 3:: number of toolpositions: je 16 pos.Number of driven toolspositions: je 16 pos.Spindle speed - driven tools: max. 6.000 min -1power capacity - driven tools: 7,5 / 5,5 kWY - Axis: 110 (+65 / -45) mmTurret 2:: number of toolpositions: 16 pos.Number of driven toolspositions: 16 pos.Spindle speed - driven tools: max. 6.000 min -1power capacity - driven tools: 7,5 / 5,5 kWY - Axis: 110 (+45 / -65) mmaxis stroke:: x-travel: 1-3: 210 mmy-travel: 1-3: 110 mmz-travel: 1+3: 30 ...

Control SIEMENS Swing diameter over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 min-1 Tailstock Multifix Accessories

turning diameter: 235 mmturning length: 200 mmturning speeds: 6500 U/mincontrol: Siemens 840D swing diameter: mmturning height: mmworkpiece height max.: 100 mmspindle bearing diameter: 90 mmspindle head: A5 total power requirement: 41 kWweight of the machine ca.: 6500 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dreh-Øüber Bett: 400 mmDreh-Øüber Support: 220 mmturning length: 1000 mmspindle turning speed range: 12,5 - 2000 U/minspindle taper: Bajonett 55022 spindle bore: 47 mmfeeds - longitudinal: 0,07 - 4,16 mm/Ufeeds - cross: 0.035 - 2,08 mm/Uthread - mm pitch: 0,87 - 192 mmthread - inch: 2 - 24 Gang/ inch.rapid travel - longitudinal/face: 3,4 / 1,7 m/minspindle drive: 11 kWpower capacity: 13 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 m• 3-jaw chuck Ø 250 mm, 4-jaw chuck 200 mm,• 2-axis- digital display, ANILAM WIZARD LATHE - refinished in 1992,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Very well preserved heavy-duty lathe, make Wohlenberg. The machine was partially overhauled in 2013! Details: Model PT1-1070II Year of construction 1989 partially overhauled in 2013 Country of origin Germany CNC control Siemens 840 D extended from 7 m to 11 m turning length Geometry Santer turret Turning diameter over bed 1,070 mm Turning diameter via support 710 mm Turning length 11,000 mm Bed width 710 mm 2 gear stages Speed 3.55 - 710 rpm. Quill diameter 200 mm Quill stroke 350 mm Spindle passage 128 mm Conveyor Drilling rig incl. boring bar length approx. Ø 200 x 2,430 mm Face plate 1,000 mm Bezel 4 quill 500 mm open Main drive motor 71 kW incl. documentation

Description SHOOTING FRORIEP 40Dv Carousel Lathe. Modernized in 1998, among other things, a driven tool system (C-axis) was installed and the control was modernized to 840 C. Details Serial number 11330051 Year of construction 1980 Control SIEMENS electrical connection 400 V Face plate diameter 3,500 mm Workpiece height 3,000 mm Face plate over corridor 160 mm Total power requirement 71 kW Space requirement approx. 13 x 6 m Reconstruction 1998

Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg

Universal CNC lathe BOEHRINGER NG 200 Manufacturer: BOEHRINGER Type [ type]: NG200 CNC double Control unit: Siemens 840D Year of construction[construction year]: 10/2001 Rotating diameter: 290 mm Turning length: 850 mm Control: SIEMENS 840 D Orbital diameter over bed: 600 mm Revolver 1 Revolver 2 Counter spindle Counter headstock Tailstock C-axis Powered tools Automatic machine doors – newly retrofitted Z-axis resolution: 40nm (2nm interpolated) Travel in Z: 740mm Rapid traverse speed in Z: 25 m/min Centering tip SK 30 X-axis resolution: 125nm (8nm interpolated) Travel in Z: 220mm Rapid traverse speed in Z: 25 m/min Distance between main and counter spindle: 1034mm Drive power: 30-72 kW Torque: 662 Nm Speed range max.: 4500 rpm Spindle head: Size 6/8 DIN 55026 Spindle diameter in the front. Bearing [spindle]: 120 mm Chuck diameter: 200-315mm Spindl ...