lathes used for sale (2,967)

turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 2000 mmspindle bore: 58 mmspindle turning speed range: 25 - 2000 U/minturning dia. in gap: 690 mmmetric threading: 41 / 0,1 - 14 mmthread - inch: 60 / 2 - 112 inch.thread - module: 34 / 0,1 - 7 mmWhitworth-thread: 60 / 2 - 112 TPIadjustment of the upper slide: 140 mmdia. of quill: 60 mmquill stroke: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,7 / 2,0 tdimensions of the machine ca.: 2,2 x 1,0 x 1,3 mA comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fittedas standard and a variable speed option is available. Huvema lathes fullyconform to CE regulations. Also available in: 1,5m3 jaw chuck4 jaw chuckNe ...

turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 1000 mmspindle bore: 58 mmturning dia. in gap: 690 mmspindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/minfeeds - longitudinal: 0,031 - 1,7 mm/Uthread - mm pitch: 0,1 - 14 mmthread - inch: 2 - 112 Gang / inch.tailstock quill diameter: 60 mmtailstock quill taper metric: MT 4 tailstock quill stroke: 120 mmmax. workpiece weight between centres: 500 kgvoltage: 400 V / 50 Hzspindle motor: 5,5 kWtotal power requirement: 6 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,9 x 1,2 x 1,5 m• stepless adjustable turning speed via frequency converter, digital display,2-axe-DRO, Made:NEWALLThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 630 mmturning length: 200 mmcontrol: MTC K turning diameter over slide rest: 360 mmturning speeds: 1800 U/min3-jaw chuck: 315 mmHolder Multifix: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartype: 6.30HS-4.4 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mmswing diameter: 3200 mmturning height: 3100 mmControl: R&D type: MTC 2x-2 workpiece weight: 20000 kgslide adjustment: 1600 mmside head - cross travel: 1000 mmTool changer: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 1000 mmspindle bore: 58 mmspindle turning speed range: 25 - 2000 U/minturning dia. in gap: 690 mmmetric threading: 41 / 0,1 - 14 mmthread - inch: 60 / 2 - 112 inch.thread - module: 34 / 0,1 - 7 mmWhitworth-thread: 60 / 2 - 112 TPIadjustment of the upper slide: 140 mmdia. of quill: 60 mmquill stroke: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,7 / 2,0 tdimensions of the machine ca.: 2,2 x 1,0 x 1,3 mA comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fittedas standard and a variable speed option is available. Huvema lathes fullyconform to CE regulations. Also available in: 1,5m3 jaw chuck4 jaw chuckNe ...

tool clamping area: 300x55x85 mmweight: 0,01 t- Multifix tool holder, 5 pcs. like new, 2 pcs. less used.--- price per piece ----The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3200 mmswing diameter: 3500 mmturning height: 2200 mmControl: Typ 840 D sl total power requirement: 51 kWweight of the machine ca.: 86 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mmturning length: 2000 mmcontrol: Siemens 805 greates pass round over bed: 720 mmbed width: 480 mmspindle diameter in front bearing: 150 mmspindle bore: 106 mmswing diameter over face slide: 430 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 630 mmturning length: 2000 mmcontrol: Zyklen gesteuert steady: 2 Stk.total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 310 mmturning diameter over slide rest: 178 mmturning length: 910 mmturning dia. in gap: 420 mmspindle turning speed range: 70 - 2000 U/minspindle bore: 38 mmnumber of feeds: 18 Stkfeed range: 0,052 - 1,392 mm/Umetrical thread cutting: 0,4 - 7 mmvoltage: 230 / 50 V Hztotal power requirement: 1,1 kWweight of the machine ca.: 0,45 tdimensions of the machine ca.: 1,6 x 0,8 x 1,4 m• incl. 3 and 4 jaw chuck• fixed and followed steadies• reducing bush MK4 - MK3• 2 fixed lathe centers• 1 Set of changing wheels• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool Revolver 8-speed Mazak Quick Turn 10N Machine used, good condition from assembly of a MAZAK Quick Turn 10N CNC lathe My. 1985 satted with 8 tool-places Turret 290 mm Space requirement LxWxH: 580 x 460 x 380 mm Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8904

Lathe was bought fully reconditioned from a reseller in 1996 and has been used since 2010. Mechanically is in good conditions, NC is to be checked.

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gil ...

harden machine 1x1x2m temperature max 1200C PLC Wärmebehandlungs Kammeröfen Wärmebehandlungs gienanth Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt  ...

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

Turning diameter 320 mm Turning length 450 mm Control HEIDENHAIN Circulation diameter over slide 260 mm Travel - x 160 mm Travel - z 450 mm Speed range - main spindle 5,000 rpm Drive power - main spindle 11 / 7.5 kW Max Torque 76 / 112 Nm Turret head (x-fold) 12 pos

Guildmaster CTX 210 2005 Turning diameter: 290mm Turning length: 300mm Orbital diameter over bed: 380mm Main spindle Speed range: 20-6000 min/-1 Max Torque: 79/72Nm max. feed diameter: 165mm Spindle diameter in front bearing: 90mm Rod diameter: max. 45mm C-axis: 0.04° Holding moment: C:112Nm Tool turret: Number of powered tools: 12 pos. Shank diameter: 30mm Speed range: max. 5000 rpm Clamping diameter driven tools: max. 16mm Travel X-axis: 160mm Z-axis: 305mm Riding pole travel: 370mm Feeds: Rapid response: X 20 m/min Rapid response: Z 30 m/min Rapid response: C 100 m/min

Bridgeport EZ Path S Used machine (very good) Control type Cnc Built 2001 Hours K.a. Price 12,500 € net plus VAT Dimensions 3100x1850x1500 Weight 2500 kg Location Haiger Description Universal CNC cycle deer of the brand Bridgeport suitable for tooling, fixture construction, training as well as mold making • Circulation diameter: 430mm • Control: Fanuc 20T Technical data • Circulation diameter 430mm • Peak width 1000mm • Control Siemens Fanuc 20 T • Reitstock MK 4 • Multifix tool station • Speed 1-4000rpm • Connection 380V - 7.5 KW

CNC Lathe Gildemeister CTX 200 Series 2 Immediately free from location: CNC Lathe Gildemeister Type CTX 200 Series 2 Built in 2001 Operating hours 39,000 CNC Control Heidenhain 4290 TP Turning diameter 210 mm Turning length 305 mm Reiststock revolver 12 driven tools Conveyor Bar loading magazine Max travel plan 160 mm Max travel length 350 mm Spindle speeds up to 5000 rpm 2 simultaneous axes with C axis 1 controlled spindle 12 driven tools Collet pliers with hydr. Hollow clamping device up to 43 mm Workpiece pick-up device up to 56 mm very many tools

CNC fine lathe Make: PetrolGer Type: TNL Control: Siemens 810T Built: 1991 Equipment and accessories: - Swivel loader system - Small conveyor belt - Charging-unloading gripper - Chip conveyors - Foot lever for clamping and relaxing the collet

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg

Index HE 25 with rod feed hydraulically controlled with long turning device

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...

Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past

Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...

Schuette SG 18-6 with gantry loader as feed lathe alternatively conversion possible as a rod lathe, incl. spindle stop setup Location 3+4 with extended stroke CNC cross slide on layer 5 Etc. Machine is ready for use and can be visited under electricity loading device is not currently connected.