lathes used for sale (3,058)

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

MAZAK INTEGREX turning/milling center 200Y Bu. 1999 Mazatrol fusion control Max Drehdurchm. 520 mm Max Schwingdurchm. 540 mm Maximum turning length 1,018 mm Bar passage 51 mm C-axis + angetr. Tools Y-axis +/-70 mm Distance between the top 500 mm Drive 30 kW Maximum main spindle spindle speed 5,000 rpm Maximum speed milling spindle 6,000 rpm Tool changer with 40 stations 3-jaw Chuck 200 mm Tool measuring arm Tailstock Chip conveyor Total connected load 31 kVA Machine dimensions 3.50 m x 2.10 m x 2.50 m Machine weight 6,800 kG 25 tool holder KM 36 duty hours approx. 36,000

MAZAK INTEGREX 200 SY + FLEX GL-100C. 2001. MAZATROL 640 MT control maximum turning diameter 540 mm Z-axis travel 1,065 mm Main spindle maximum RPM 5,000 rpm Main spindle full C-axis Counter-spindle maximum speed 6,000 rpm Y-axis +/-80 mm Milling spindle for turning and milling Spindle maximum speed 6,000 rpm Full B-axis, 225° Tool changer with 40 tool positions KM-63 tool mount Tooleye 1 x 3 - jaw Chuck, diameter 210 mm 1 x 3 - jaw Chuck, diameter 170 mm Gantry loader Flex GL-100 C. High pressure cooling through spindle, 20 bar Chip conveyor CE mark

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

CNC carousel lathe with tool changer.You Ji GTH-35/45 ATC-I. Built 2012.Fanuc 0i-TD CNC Control.Planchime diameter 3,500 mm.Hydrostatic table - Max load 50 t.swing diameter max. 4,500 mm.Turning diameter max. 4,000 mm.turning height max. 2,200 mm.Stoesselplanweg X -1.750/+2.160 mm.Stoesselsenkrechtweg Z 1.500 mm.Table drive 60/75 kW.Speed 2 x 75 mm.Torque at the table 67,330 Nm.Tool magazine with 16 places.Tool holder 7/24 BT 60.Place requirement 12,375 x 8,210 mm.Machine height 7,920 mm.Full cladding.3-colors Signal lamp.NEW - 200 operating hours ! Immediately available;; As good as new

CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 200 run hours !Available immediately.; As new

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price

Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.

CYL1640GS lathe with suffragefree speed control, NEW! with Fagor 3-axis position display, Schneider Elektronik. peak height 205 mm. Tip width 1000 mm. Turning diameter over bed 410 mm, over support 258 mm. Spindle bore 52 mm, 16 spindle speeds 0 - 2600 rpm, Reitstockpinolenkonus MK4, tailstock pinole stroke 100 mm, spindle nose D6, bed width 274 mm, Laengsvorschuebe 0.08-1.15, cross-forecourt 0.006-0.92, thread cutting: metric 0.5-7, whitworth 4-56TPI, engine power 5.5 kW. Weight approx. 1400 kg. Mass 2280 x 1120 x 1700. Hochier: running and fixed luenette, 3-axis position display, quick-change steel holder with 5 inserts, 3 jaw lining, four-jaw sheet chuck, flat disc, plan-mounted disc, cone-turning device, cooling agent device, halogen work lamp, spaenewanne, splash protection, running and fixed koer tip, instructions in English New

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

Control for Mazak Intergrex (new) Technical data see pictures Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

multi spindle automatic lathe Schuette SF 13 built in 1991 - pick up with back side tooling -Thread cutting gear - chip conveyors - PLC control and much more.

Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc.

Qty. 1 Second-hand roll lathe Mfc.: Herkules Type: WD-700 Built: 1952 General overhauled by Hoesch-MFD in 1990 Centre height: 600 mm Turning length: 2750 mm 2-axis digital display – Mfc.: Micro Wizard Longitudinal drive Standstill torque: 14 Nm Rated revolution: 2500 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min. Plain drive Standstill torque: 14 Nm Rated revolution: 3000 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min.

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: 300 mm centre distance: 1500 mm gr. Turning diameter over bed: 625 mm spindle bore: 105 mm spindle retainer: Gr. 8 mm taper of tailstock Quill: 5 MK spindle speed: 6.6-2000 RPM elect. Supply: 400 V, 15 kW space: 4400 x 2050 x 1820 mm weight: 5200 kg

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

This 3-axis Gildemeister CTX 620 linear was manufactured in 2007. A horizontal turning machine, it includes tool holders and a tail stock. Consider the opportunity to buy this Gildemeister CTX 620 linear horizontal turning machine. Contact us for more information.

This 3-axis HAAS ST-30 horizontal turning machine was manufactured in 2011. It features a 10 chuck, 3400 rpm spindle speed, live tooling with a C-axis, a toolsetter, and a conveyor. It also includes a 12 x VDI40 turret and a tailstock. If you are looking to get high-quality turning capabilities, consider the HAAS ST-30 machine we have for sale. Contact us for more information.

This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, its ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine.

This 3-axis HAAS ST-30 horizontal turning machine was manufactured in 2014, comes with KID80 barfeeder. Ideal for precision turning operations, it offers robust construction and reliable performance. Consider the opportunity to buy this HAAS ST-30 horizontal turning machine. Contact us for more information.

This 3-axis Star SR-20J N was manufactured in 2019. Its a Swiss type turning machine designed for precision and efficiency. Ideal for intricate machining tasks, this model offers robust performance in a compact footprint. If you are looking to get high-quality turning capabilities, consider the Star SR-20J N machine we have for sale. Contact us for more information.

This EMCO Emcomat E-200 was manufactured in 2016. A robust horizontal turning machine featuring a swing over bed of Ø 400 mm and a distance between centers of 1000 mm. It offers a spindle speed range of 50–4000 rpm with stepless speed control and a spindle bore diameter of Ø 80 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcomat E-200 machine we have for sale. Contact us for more information.

This 3-axis Citizen CINCOM A32-VII CL swiss type turning machine was manufactured in 2014. It features a main spindle with a 32 mm capacity, a counter spindle, and a maximum turning length of 3000 mm. Equipped with a high-speed CHIDOMI system, it supports simultaneous movements across all axes and offers a feed rate up to 9,000 mm/min. Consider the opportunity to buy this Citizen CINCOM A32-VII CL swiss type turning machine. Contact us for more information about this machine.