lathes used for sale (3,103)

Control: OSP-P300 Max. turning length: 950 mm Max. turning diameter: 340 mm max. turning Ø over slide: 380 mm max. turning Ø over bed: 580 mm Max. speed: 4,200 rpm Tool holder: BMT 2 Tool Turrets A-turret: 12 tool positions (all driven) B-turret: 8 tool positions Tailstock Conveyor Hydraulic Power Chuck B210/A8 Touchsetter High Pressure Coolant Pump Enlarged water tank

Universal CNC lathe INDEX G 400 RATIO Line Hersteller [manufacturer]: INDEX Type [ type]: G 400 Control unit: Siemens C200-4D incl. milling of cylindrical tracks Incl. handwheel Baujahr[construction year]: 10/2004 Turning length 1250 Main spindle D102 with swing-in gear 1700 Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE TOOL CARRIER 1 COMPL. AXES X,Y,Z,B with turning/milling operation Disc turret VDI40 10 stations MILLING SPINDLE HSK A63 Tool carrier axles 2 XZ Disc turret VDI40 10 stations SUB-SPINDLE D102 DIRECT DRIVE 1300Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE DISC MAGAZINE ON THE LEFT OF THE HSK63 SINGLE-SWING GEARBOX WITH 32 TOOL HOLDERS DISC MAGAZINE RIGHT COMPL. M.32 TOOL HOLDERS HSK 63A Travel path: X= 320mm Z=1250mm Displacement measuring system X-axis glass mast. (abs) Fe ...

Lathe Weipert

Key data: 650 mm, 1500 mm

Year of construction 2014, commissioning 2017 OSP P300S Controller Travel: X1/X2 axle: 695/235 mm Y-axis: 300 mm Z1/Z2 axle: 1,600/1,461 mm B-axis: -30° to +210° Max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11, max. speed: 3,000 rpm, Max. torque: 955 Nm, bore 112 mm Hollow Clamping Cylinder SMW VNK320-127, Bore 127 mm 3-jaw chuck Forkardt 3QLK 315-88 Z11 Pressure reducing valve 8-70 bar Milling spindle 22 kW, max. speed: 12,000 rpm Tool magazine with 40 tool positions, HSK-A63 Lower turret with 12 tool stations Self-centered bezel on the lower turret Hydraulic bezel SMW SLU-X-3.2-ZS, clamping range: 50-200 mm Programmable tailstock Renishaw RMP Probes Drum trough filter TMF300 with 980 L tank 8 bar circulation pump 70 bar high pressure pump Hinge belt chip conveyor Tool monitoring system for tool life and breakage Tool measur ...

Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New)  ...

Manufacturer: Optimum Year of construction: 2024 Condition: as good as new, workshop tested Delivery time: immediately available Specifications Tip height: 165 mm Center width: 830 mm Circumferential diameter over bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Speed ranges: 16 steps, 70–2000 rpm⁻¹ Drive motor: 1.5 kW, 400 V, 50 Hz Spindle holder: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle cone: MK5 Tailstock mount: MK3, quill stroke 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Gradients and feed Metric: 0.4-7 mm/rev (26 pitches) Inches: 56-4 Gg/1" (34 pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Face feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed bezel (Ø 6–50 mm) Rotating bezel (Ø 8–3 ...

Conventional precision lathe WEILER "CONDOR VC" With 3 axis digital display Siemens Year of Make: 2012 Spindle bore: 56 mm Center width: 800 mm Circumference Ø over bed : 205 mm Speed range: 30 – 3500 rpm With the following accessories: Multifix Tool Holder Chip backsplash wall with interior lighting Coolant Setup 3 jaw chuck 0 200 mm Feed protection Moving Lynette 0 approx. 150 mm Tailstock with extendable drill quill Operating instructions

2 pieces (identical) used lathes Turning center milling center INDEX R200 INDEX VirtualLine Year of construction 2011 and year of construction 2009 At that time, the original price of both machines together: €1,385,647.90 gross Regular service only from the manufacturer INDEX. Service and parts exchange alone between 17.04. and 05.08.2025 in the amount of € 96,305.41 (invoices are available for inspection). Therefore, the machines are in absolutely excellent condition. Spindle hours (as of 21.11.2025) Year of construction 2011: S1: 4,114 h S2: 3,064 h S3: 2,535 h S5: 4,170 h Spindle hours (as of 21.11.2025) Year of construction 2009: S1: 2,951 h S2: 953 h S3: 3,524 h S5: 5,990 h Turning-milling centre with roller bearing slide guides Work spindles can be moved on slides. Tool carrier integrated into recesses in the machine bed, all linear axes arranged at  ...

Key data: 370 mm, 600 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU300-2ST Year of Make: 2005 Control: OSP-E100L Delivery time: in stock Machinery  Parts conveyor belt and parts collection tray – workpiece chute with removal conveyor belt incl. electrical kit  2 disc turret with VDI40 (12 + 8 stations)  Power clamping cylinder for hollow chips – Hole in the drawbar 52mm  Extension Kit "D" – Kit one touch IGF-D  Open/close chuck while the spindle is running via M-Code  Reinforced coolant pump 8 bar  Coolant on A and B turrets can be switched via M function  Interface for connecting rod feed  Chip conveyor Technical details  Swing diameter over bed: 530mm  Swing diameter over slide: 380mm  Distance between the tips: 600mm  Max. turning diameter: 370mm  Max. turning length: 600mm  Travel X-axis: upper 260mm ...

Key data: 420 mm, 650 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LB400M-1SC Year of Make: 2000 Commissioning: 2001 Control: OSP-U100L Spindle hours: 14502 hrs Delivery time: in stock Machinery - Interior extraction from Hengst Filtration (built in 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock available - Coolant supply, also available through the tool - Dialogue programming IGF - Chip conveyor (scraper) Technical details - Max. turning length: 650 mm - Max. turning diameter: 420 mm - X-axis travel: 300 mm - Travel Z-axis: 675 mm - Travel C-axis: 360° - Chuck passage: 72 mm - Spindle passage: 95 mm - Clamping cylinder passage: 95 mm - Tool holder: VDI 40 - Tool stations: Stations 12 - Spindle speed: 2800 rpm - Main spindle power: 22/30 kW - M-spindle ...

Offer 25432 Specifications: - Turning diameter 320 mm - Center width 750 mm - Largest turn – Ø over bed 550 mm - via flat slide 175 mm - Spindle bore 32 mm - Spindle holder - Pick-up cone of the tailstock quill MK 3 - Quill stroke 180 mm - 18 spindle speeds 85 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrical Pitsch thread -Arbor - Cheek chuck -Lunette - Drive 400 V / 2.2 kW - Space requirement approx. W 2100 x D 750 x H 1300 mm - Weight approx. 750 kg

Key data: 350 mm, 300 mm

Control: Okuma OSP-E100L Travel: X approx. 350 mm. Z: approx. 300 mm, maximum rotary diameter: 400 mm Item No.: 110174 Year of Make: 2004 Equipment: Conveyor Ewag infeed belt -20 positions

Key data: 250 mm, 500 mm

Item no.: 0727 Year of Make: 1995 Equipment: Bar Feeder Sameca Chuck + Collet Chuck Various tool holders Remark: Electronics defective

For sale is a Hyundai twin turret CNC lathe LM 1600 TTSY from 2023 with 1565 operating hours and 506 spindle hours., Features:, - High-performance, integrated spindle motor, - High productivity through simultaneous use of upper and lower turrets, - Robust BMT turret, - Multitasking is possible with the addition of a Y-axis to the upper turret (TTSY specifications)., - Integrated machining through synchronized control of main and counter spindles, - Design with hybrid guides: Combination of box guide (XY axis) and roller guide (Z axis), (Series LM1600/1800TT), Specifications:, - Max. turning diameter 230mm, - Max. turning length 705mm, - Main feed size 6 / Secondary feed size 6, - Drive type Built-in, - Spindle speed 6,000 rpm, - Spindle power 15/11 kW, - Spindle torque 208/140 Nm, - Travel distances (X1/X2/Z1/Z2/ZB/Y) 65/195/700/720/700/100 mm, - Rapid traverse (X1/X2/Z1/Z2/ZB/Y) 20/20/4 ...

For sale is a Hyundai twin-turret CNC lathe LM 1600 TTMS from 2023 with 1407 operating hours., and 343 spindle hours., Features:, - High-performance, integrated spindle motor, - High productivity through simultaneous use of upper and lower turrets, - Robust BMT turret, - Integrated machining through synchronized control of main and counter spindles, Specifications:, - Max. turning diameter 230mm, - Max. turning length 705mm, - Main feed size 6 / Secondary feed size 6, - Drive type Built-in, - Spindle speed 6,000 rpm, - Spindle power 15/11 kW, - Spindle torque 208/140 Nm, - Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm, - Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min, - Lead type LM, - Number of tools: 2 x 12 pieces, - Tool size 20/32 mm, - Milling spindle speed 5,000 rpm, Subject to prior sale, changes and errors!

Control: OSP-300LA Year of Make: 2019 Distance between tips or spindle lugs: 1085 mm Circumferential diameter over carriage / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm Travel C-axis: 360 mm Travel W-axis 895 mm Main spindle speed: 45 - 5,000 rpm Sub-spindle speed: 45 - 6,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: Conveyor One touch IGF Touchsetter 2x 3-jaw chuck Sub-spindle Coolant Plant HMF-980 Suction

Swing diameter over bed/cross slide: 700mm/430mm, turning length: 4000mm, spindle bore: 80mm, speed: 1500rpm, bed width: approx. 550mm. Machine dimensions X/Y/Z: approx. 6300mm/1350mm/2000mm, weight: approx. 5700kg. An on-site inspection is possible.

Center height: 210mm, distance between centers: 1500mm, swing over bed: 420mm, spindle bore: 57mm, speed range: 38–2000/min, main drive: 7.5kW, weight: 2t. Equipment: 3-jaw chuck, tailstock, steady rest, quick-change tool holder, coolant system, lighting, year of manufacture: approx. 1980–1985. No data sheet, fully functional, well maintained, ready for immediate use. Only slight oil moisture in the lower area due to age, without relevant oil loss. An on-site inspection is possible.

A cycle-controlled CNC lathe Microcut of the BNC series is available. Turning length: 2000mm, chuck diameter: 400mm, turning diameter over bed/cross slide: 610mm/330mm, spindle speed: 2500rpm, tool positions: 8. Machine dimensions X/Y/Z: approx. 4000mm/2300mm/1800mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible.

Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible.

Year of construction 2006 Fanuc Control 16 TC max. turning diameter 210 mm X-axis X1 / X2 mm 200 Z-axis (left side) Z1 mm 200 . Z-axis (right side) Z2 mm 650 Bar diameter 45 mmLongitudinal travel Planweg Spindle head Spindle bore max. turning diameter 210 mm Spindle speed 4500 rpm Spindle power 2 x 11 kW Spindle nose A2-5 Rapid traverse X-Z axis 24 m/min Rapid traverse right spindle 32 m(min 2 x turret (tool carrier) for 15 tools, driven, VDI40 Indexing time 0.25 sec. Powered Tools 12 Tool holder VDI 40 Quill stroke 120 mm Recording MK 5 Accessories: Bar feeder (not original to this machine) Chip conveyor, 3 driven tools.

Key data: 510 mm, 1100 mm

Year of construction 2010 Turning length 1000 mm Turning diameter bed Ø 510 mm Turning diameter carriage 300 mm Spindle bore 80 mm Power spindle 16 kW Bed width 330 mm Quill 75 Ø Jaw stroke 160 mm Spindle mount 5 Mk Speed 2500 rpm Feed X - axis 8000 mm/min. Feed Z-axis 8000 mm/min. Length 3200 mm Height 1800 mm Width 1800 mm

Swing diameter over bed/cross slide: 600mm/410mm, turning length: 1190mm, travel X/Z: 320mm/1250mm, speed: 3000rpm, spindle bore: 75mm, torque: 785Nm, tailstock taper: MK5, tool stations: 8, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5500kg, control: Siemens Sinumerik 840D powerline, operating hours: 22407h. Including conveyor and chip breaker. Documentation available. An on-site inspection is possible.

A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 15.7kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, control: Fanuc 32-iB, operating hours: approx. 28487h, spindle hours: approx. 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck and probe. Documentation available. An on-site inspection is possible.

Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible.

A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible.

Proking LC45 with Fanuc 0iTF and only 3032 spindle hours. Built in 2013. - Max. turning diameter 1135 mm - Turning length 2000 mm - Circumferential diameter via rotary slide 760 mm - 30/37 kW main motor - 7-700 rpm - Spindle bore 153 mm - C-axis 0.001° - 12 VDI turret - Hydraulic main chuck 800 mm - 2 chip conveyors -Tailstock

Johnford sv 45 H APC -x,y,z =1100x530x600 -6000 rpm -2 pallets, table size 1220x500 Year of construction : 02/2001 Electrified

Quaser MV154 APC/P with Fanuc 18iMB. Good condition and electrified. Year of construction 2006 - Table 800 x 500 (2 pallets) - x, y, z = 700, 500, 560 - 48 Tools

CNC Control: Mitsubishi M-720BM(MAPPS 3) Upper turret Tool holder: 12 Main spindle Max. spindle speed rpm: 4000 Spindle drive power kW: 18.5/15 Spindle bore mm: 91 Manufacturer: KITAGAWA Sub-spindle Spindle motor: 6000 Spindle drive power kW: 11/7.5 Spindle bore mm: 43 Manufacturer: KITAGAWA Equipment Conveyor Signal lamp Tool measuring arm High Pressure Pump Workspace light Common Variables for Custom Macros (100) Year of construction: 2011