lathes used for sale (3,047)

X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for ...

turning diameter: 630 mmturning length: 3000 mmswing diameter over bed slide: 480 mmturning speeds: 9 - 1800 U/minspindle bore: 83 mmtailstock quill taper MT: 6 total power requirement: 22 kWweight of the machine ca.: 5400 kgdimensions of the machine ca.: 5250 x 1900 x 1750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter over bed/slide: 520mm/340mm, turning length: 850mm, speed: 3500rpm, spindle bore: 70mm, chuck diameter: 315mm, bar capacity: 70mm. Machine weight: approx. 7500kg, control: OSP 500L. Documentation available. On-site inspection is possible.

turning diameter over bed: 410 mmturning diameter over slide rest: 260 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 40 - 2000 U/mincentre height: 205 mmspindle bore: 50 mmtotal power requirement: 4,5 KWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,4 x 1,3 x 1,5 mLeadscrew lathe- with copying device- 200mm 3-jaw chuck- 2x Multifix quick-change tool holders- Live center- Machine light- Chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

turning diameter: 140 mmturning length: 615 mmcontrol: C200-4D spindle passage: 65 mmMain spindle: turning speeds: 5.000 U/minmax. torque at 40% / 100% load: 145 / 105 kWturret-slide: 1,2 und 3 x-travel: 110 mmz-travel: 360 mmy-travel: 70 mmrapid traverse X/Y/Z: 25/12/45 m/minOpposed spindle: slide travel X-axis: 150 mmZ- Travel: 600 mmturning speeds: 5.000 U/minB - axis: B-Korrekturachse +/- 1 °tool turret - number of stations: 3 x 12 tool taper DIN 69880: VDI 25 x 48 C-axis: 0,001 °total power requirement: 61 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 9,75 x 3,10 x 2,85 mLoading:Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm)Unloading:BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007The data for th ...

Turning diameter: 320mm, turning length: 1000mm, spindle clearance: 80mm, speed: 3150rpm, travel X/Z: 265mm/1000mm. Machine dimensions X/Y/Z: approx. 5500mm/2400mm/2400mm, weight: approx. 7000kg, control: Traub System TX-8. Including a tool set, three-jaw chuck and bar chuck with collets. Documentation available. On-site inspection is possible.

turning diameter over bed: 280 mmturning diameter over slide rest: 150 mmturning length: 800 mmturning speed range: 26 - 2000 U/minspindle bore: 24 mmtotal power requirement: 0,8 / 1,6 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,60 0,70 1,20 m1. Hand - School MachineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotation diameter over bed/slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, center width: 1000mm, machining length: 980mm, feed: 8m/min, bed width: 433mm, tool positions: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection is possible.

Turning diameter over bed/cross slide: 500mm/280mm, max. workpiece length: 1500mm, travel X/Z: 280mm/1430mm, spindle bore: 82mm, speed: 2200rpm, rapid traverse X/Z: 6m/10m/min, quill diameter: 75mm, quill stroke: 150mm, bed width: 400mm, chuck diameter: 250mm. Machine dimensions X/Y/Z: approx. 3350mm/1750mm/1650mm, weight: approx. 2700kg, control: Fanuc Series 0i Mate-TC. Documentation available. On-site inspection is possible.

Turning diameter over bed: 500mm, turning diameter over face slide: 250mm, center distance: 2000mm, spindle bore: 58mm, speed: 1400rpm. The feed of the machine is defective. On-site inspection is possible.

faceplate diameter: 4000 mmswing diameter: 4300 mmturning height: 1750 mmslide adjustment: 1000 mmtable load: 18 tturning speeds: 1-92 U/minControl: Siemens type: 840 D mmRest: 2 chip conveyor: ram head dimension: 250x250 mmFeed: 1-4000 mm/minmain gear-box motor: 55 kWtotal power requirement: 85 KVAweight of the machine ca.: 64 tdimensions of the machine ca.: 8x5,8x8 mThe machine was overhauled in 2007.The machine is currently designed to machine rings,but can be converted again for machining large parts.Additional informationChip conveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested ...

Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible.

travel -x axis: 740 mmtravel -z axis: 400 mmtravel -y axis: 30 (optional) mmchucking diameter: 260 mmturning diameter: max. 200 mmSpindle Speed: 4.500 U/min.Tools speed: 6.000 U/minrapid traverse Z-axis: 15 m/minrapid traverse X-axis: 60 m/minrapid motion - y-axis: 30 mmmachine weight ab.: 9.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Benzinger CNC double-spindle precision lathe is available. Travel X1/Z1/Z2: 310mm/160mm/80mm, rapid traverse X/Z: 30m/min, feed X/Z: 4000N, max. tool length: 60mm, machine dimensions X/Y/Z: approx. 2200mm/1350mm/1850mm, weight: approx. 2250kg, control: Siemens Sinumerik 828D. Including bar loader LNS Express-220 and fire extinguishing system Kraft & Bauer FB 703. Documentation available. On-site inspection is possible.

ED 300ECO Metal Lathe Motor 400W (S1) 230V 50Hz Dimensions in mm 760x230x254 Center width/height 300mm / 90mm Rotary spindle speed 50-2500 rpm Spindle bore 20mm Spindle mount MK3 Tailstock Cone MK2 Travel longitudinal slide 275mm Traverse travel cross slide and top slide 70mm Quill path 5mm Thread Metric in mm/r 0.5-2.5 max. tool holder 8mm Weight 48kg G&HM ED300Eco_2

CNC controller: FANUC FS-31iA5 (MAPPS 4) Capacity X-axis travel mm: 685 Y-axis travel mm: 125 Z-axis travel mm: 1075 Turning length mm: 1045 Max. turning diameter mm: ø: 600 Bar work capacity mm: 65 Turn-mill spindle Full indexing specifications: YES B-axis degree: 120º FULL INDEXING SPECIFICATION Speed spindle rpm: 12000 Drive power kW: 18.5/11 Tool magazine Magazine places: 80 Tool holder: CAPTO C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret Number of tool slots St .: 12 Drive power driven tools kW: 5.5/3.7 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLO ...

Key data: 800 mm, 4000 mm

Description Seiger SLZ 800E cycle lathe incl. milling unit Details Machine no. 4443 Year of construction 2008 Control Siemens Sinumerik Turning diameter 800 mm Turning length 4,000 mm Face plate 800 mm, 4 jaws Face plate 500 mm, 4 jaws 3-jaw chuck 400 mm Lynette up to 450 mm (2 different) Accessories various jaw sets powered tool Permissible workpiece dimensions: between tips without setting stick 2,000 kg with a setting stick 2,200 kg with two sets 2,500 kg flying in the face plate 750 kg Machine dimensions incl. cladding 2,000 mm + Tip Wide x 2,750 mm x 2,000 mm incl. documentation

turning diameter over bed: 800 mmturning diameter over slide rest: 530 mmturning length: 3000 mmturning diameter in the slot: 850 mmcenter height over bed: 380 mmbed width: 550 mmspindle head: DIN 55022/8 spindle bore: 73 mmspeeds: 18 - 900 U/minfeeds: 224 / 0,018-10 mm/Uthread - mm pitch: ca. 84: 0,2 - 224 mmtotal power requirement: 17,5 kWweight of the machine ca.: 8,6 tdimensions of the machine ca.: 5,5 x 1,8 x 1,72 mCondition: ready for operation: Video(s) available on our website.: Electric 380 Volt: 3 jaw chuck: 500 mmFaceplate: 720 mmFaceplate: 500 mmRoll steady, fixed: 450 mmRoll steady, fixed: 250 mmTool holder system Multifix: Typ B Solid universal lathe with rapid longitudinal and transverse support traverse, pole-changing spindle motor (i.e., two speeds can be selected by increasing the motor speed), single-lever control for all support movements, pre-selected feed rates,  ...

Control Siemens 840D Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Speed 4,500 min-1 8-speed revolver Conveyor

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 49-64 mm-Type designation: not available-Dimensions total Ø 210 x 125 mm-Weight: 10.9 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 163 mm-Mounting: Hole shaft cone Ø 44-54 mm-Type designation: not available-Dimensions total Ø 220 x 85 mm-Weight: 8 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 213 mm-Mounting: Hole shaft cone Ø 44-54 mm-Type designation: not available-Dimensions total Ø 230 x 85 mm-Weight: 10.3 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 30-39 mm-Type designation: not available-Dimensions total Ø 180 x 75 mm-Weight: 5.9 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 50-60 mm-Type designation: not available-Dimensions total Ø 180 x 90 mm-Weight: 8 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 213 mm-Mounting: Hole shaft cone Ø 56-59 mm-Type designation: not available-Dimensions total Ø 260 x 120 mm-Weight: 14.3 kg

Tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Swedturn, Type ST12 CNC 300 tool changer -Tool turret: for max. 12 tools -Tool holder: Ø 60 mm -Individual components: see photos -Dimensions: 565/470/H565 mm -Weight: 319 kg

Specifications: Manufacturer: Weisser Type: Univertor AM-1L Year of Make: 2020 Control: CNC control Siemens SINUMERIK 840D sl Travels: X 1,700 mm Z 500 mm Spindle unit left side of the machine Speed Limit| 3,500 rpm Rated speed: 780 rpm Torque: 430/610 Nm (100/40% ED) Spindle bearing Ø: 120 mm Spindle flange: A8 according to DIN 55026 Dressing unit Max. speed: 16,000 rpm Dressing disc holder Ø: 40 x 10 mm Revolver Target turret: 12-speed Drive: electric swivel drive Internal grinding spindle with grinding software Tool holder: D28/43 (thread M28x2) Spindle bearing Ø: 45 mm in hybrid version Speed limit: 45,000 rpm. Rated speed: 30,000 rpm Drive power: 15/18 kw (100/60 % ED) Torque| 4.7/5.7 Nm (100/60% DC) External grinding spindle with grinding software Tool holder taper: 1:10; Ø 73 mm Spindle bearing Ø: 80 mm in hybrid version Speed limit: 6,00 ...

Control Okuma OSP-P300 SA Rotary diameter. [mm] 650 Turning length [mm] 1000 Main spindle: Motor spindle technology Speed 4,200 rpm Power 22 kW Torque 427 Nm Spindle bore 91 mm Hollow clamping cylinder 86 mm C-Axis High Accuracy Package Chuck SMW KNCS-N 275-86 K8 Sub-spindle: Motor spindle technology Speed 5,000 rpm Power 22 kW Torque 420 Nm Spindle bore 80 mm Hollow clamping cylinder 77 mm C-Axis High Accuracy Package Chuck SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Milling spindle technology Speed 12,000 rpm Power 22 kW Torque 120 Nm Tool holder HSK 63 Y-axis 250 mm (+/- 125 mm) B-axis 240° Tool magazine: Number of stations 80 Equipment / Accessories: Displacement measuring systems directly in X/Y/Z axis (glass scales) Chip disposal chip conveyor Coolant supply IKZ system, 70 bar Coolant temperature control Deltatherm E4 Chip flushing work area ...

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø mm-Mounting: Hole shaft cone Ø 38-48 mm-Type designation: not available-Dimensions total Ø 180 x 85 mm-Weight: 7,3 kg