lathes used for sale (3,103)

Key data: 380 mm, 1019 mm

X-axis 234 mm Y-axis 100 mm Z-axis 1090 mm Tailstock 1075 mm C-axis 360° Drive power 26 kW Max. bar passage 80 mm Max. speed 4000 rpm Number of tool positions 12 Drive power milling drive 5.5 kW Max. spindle speed 5000 rpm Powered tool stations 12

Key data: 1160 mm

Powerful vertical CNC lathe from HYUNDAI WIA Year of construction 2013 FANUC 32i Manual Guide Max. turning diameter 1,160 mm Max. swing diameter 1,355 mm Main spindle power up to 60 kW Max. torque 6,490 Nm C-axis with 0.001° resolution 12-speed BMT85P tool turret 12 powered tool stations Renishaw Q-Setter Hyundai WIA Tool Breakage Monitoring 20-bar coolant system Hinged belt chip conveyor 800 mm 3-jaw chuck Seoam CAS 32

Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine.

Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.

Lathe PPL 200-225 - Turning diameter over bed: 400-450 mm - Turning diameter over slide: 235-285 mm - Offset with bridge: turning diameter 600-650 mm - Face plate diameter: 350 mm - Bed width: 320 mm - Engine power: 5.5 hp - Tool carriage: 150 mm stroke Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

CNC Lathe Manufacturer: Gildemeister Type: CTX 410 V3 Machine No.: 0136004581 Year of Make: 2006 Control: Siemens 840D ShopTurn Circumferential diameter: 505 mm Chuck diameter: 210 Spindle passage: 65 mm Drive power: 40/ 100%ED 21/28 KW Speed range from – to: 25-5000 Dimensions approx.: 4300x2000x1800 Weight approx.: 5600 Kg - 12-speed revolver - VDI 40 - C-axis - Powered tools 12 stations - Package bar machining - Chip conveyors - Tailstock - SMW Autoblok 210BB - Driven tool holders 3x axial - Driven tool holders 2x radial - Various other tool holders - New engine for revolver Errors excepted

CNC Lathe Manufacturer: Gildemeister Type: CTX 420 Linear V4 Machine No.: 02260005181 Year of Make: 2005 Control: Siemens 840D ShopTurn Circumferential diameter: 680 Chuck diameter: 250 Drive power: 40/ 100% ED: 37/25 KW Speed range from – to: 20-5000 rpm Weight approx.: 6500 Kg - 12-speed revolver - VDI 40 - C-axis - Y-axis - Powered tools 12 stations - Chip conveyors - Tailstock - SMW Autoblok 250 BH Errors excepted

CNC Lathe Manufacturer: Gildemeister Type: CTX 310 Engine No.: 8042942713C Year of Make: 2008 Control: Heidenhain IT Circumferential diameter: 500 mm Spindle Passage: 65 Drive power: 40/ 100% ED: 16/12 KW Speed range from – to: 25-6000 rpm Weight approx.: 3500 Kg - 12-speed revolver - VDI 30 - Chip conveyors - C-axis - Powered tools 12 stations - Package bar machining - LNS QuickLoad Servo 3 short loader - Tailstock - Hainbuch ToplusMini Axzug 65 Errors excepted

Key data: 550 mm, 1800 mm

Offer an Ernault lathe here. The Frenchwoman is in good condition and runs great! It already has an inverter instead of the susceptible ballast gear. New straps ! and chip protection. Tip height 250mm Tip width. 1800mm Speed 32-1700rpm Passage 53mm Connected load approx. 15kw Weight approx. 2.6t Rapid traverses in both axes Two bezels

Key data: 1100 mm, 1000 mm

I offer here a Heid lathe in very good condition for slightly larger diameters. Tip height max.550mm Center width 1000mm Speed 7-710rpm 800 Röhm Lining Machine also has a copying device. (Bars and touch fingers are available) Spindle brake All feeds electr. switched Connected load approx. 15kw Rapid traverses in both axes Tip height adjustable! Weight approx. 6/7t Quite a few accessories such as steel holders, interchangeable wheels, 2x 600 chucks etc.

An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement.

Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2007. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details.

Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.

Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.

Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.

Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details.

This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details.

Distance between centers: 2000mm, control: Siemens Sinumerik 810, the controls flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible.

A Buffalo CNC lathe in need of repair is offered for sale. Center height: 200mm, distance between centers: 880mm, chuck diameter: 160mm, swing over bed: 410mm, swing over cross slide: 230mm, bed width: 260mm, spindle bore: 46mm, spindle nose: A2-5, max. spindle speed: 5000rpm, X-axis travel: 190mm, Z-axis travel: 855mm, rapid traverse: 12m/min, tailstock quill diameter: 58mm, tailstock quill travel: 140mm, tailstock quill taper: MT4, control: Fagor 8055 TC. Accessories included. Dimensions X/Y/Z: approx. 2286mm/1800mm/2230mm, weight: approx. 2350kg. The feed motor of the spindle drive is defective. An on-site inspection is possible.

Max. turning diameter: 1000mm, max. swing diameter: 1250mm, max. workpiece diameter: 1000mm, max. workpiece length: 850mm, max. workpiece weight: 1000kg, X/Z travel: 1250mm/1000mm, max. speed: 900rpm, feed rate: 14m/min, rapid traverse: 20m/min, spindle nose: DIN 55026 short taper size A15, tool interface: DIN 69880 VDI60 tool holder, spindle diameter at the front bearing: 240mm, control: Siemens Sinumerik 840D. Machine weight: approx. 25t, space requirement: 85m². Equipment: SMW IN-D 1000 chuck, chip conveyor. The machine has no driven tools. Documentation available. Inspection possible by appointment.

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.

Various quick-change swivel holders / quick-change holders / accessories in total 42 pcs: 7 pcs WDL 4/50 16 WDR 4/40 10 pcs WDL 4/40 3 pcs WB 4/60⌀ 3 pcs. WBW 4/60⌀ 1 pcs. WBW 23/60⌀ 2 pcs. without type Please let us know which items you are interested in for an offer. We are happy to provide you with more photos.

Here we have a Weiler DZ 65, 16-fold Duplomatic Stern turret, 2 spindles, collet head for both spindles, driven tool on all Rev places, Chip conveyor, coolant through 2 spindle, spring ejector 2nd spindle, rod feeder connection, parts removal via drip tray, parts conveyor belt, various spindle insert tubes, chip conveyor, material feed Irco Profimat 3m,

Lathe Colchester Bantam VS 3500

Lathe Gildemeister NEF 320 K BJ 2002

Lathe Gildemeister CT 60 BJ 1990

Vertical Two-Spindle Turning Center - Control Siemens 840 D - Machine bed VSC 400 Duo - 2 x disc turret 12 x dia 40 mm, driven - 2 x additional drilling and countersinking station - Open workpiece transport system - Transfer and turning unit - Interface to an external handling system - Central cooling center supply high-pressure pump 70 bar - Blowing off the pick-up device and the clamping devices - Workpiece measurement - Tool monitoring - Emag network option - Sister tool management Circumferential diameter 260 mm x-travel 860 mm z-travel 200 mm Main spindle 2 max. speed up to 4500 1/min Spindle spacing 1055 mm Main Drive 2 AC Asynchronous Motor 6ß/100% ED 39/28 KW Maximum torque 460 Nm Rapid traverse x/ z 45/ 30 m/min