boring mills and machining centers used for sale (3,264)

Travel X/Y/Z: 2500mm/900mm/800mm, speed: 18000rpm, spindle power: 35kW, max. table load: 3000kg, tool places: 30, machine dimensions X/Y/Z: approx. 6500mm/3000mm/3000mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D, operating hours: 55730h, spindle hours: 18696h. Z-axis brake defective, roller shutter in machine room defective, screen cable defective. Including cooling lubrication system Knoll VRF 250/1250, documentation available. On-site inspection is possible.

Travel X/Y/Z: 460mm/510mm/560mm, table dimensions X/Y: 305mm/305mm, speed: 15000rpm, power: 22kW, tool positions: 50, tool diameter: 95mm, tool weight: 10kg, max. workpiece diameter: 500mm, max. workpiece height: 745mm. Rapid traverse: 60m/min, B-axis speed: 150rpm, positioning accuracy: +/-0.001mm, power consumption: 45kVA, control: Arumatik. Documentation available. On-site inspection is possible.

X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible.

Travel X/Y/Z: 600mm/500mm/400mm, table dimensions X/Y: 900mm/600mm, spindle mount: SK40, speed: 6000rpm, tool positions: 24, feed: 6m/min, rapid traverse: 15m/min, machine dimensions X/Y/Z: approx. 4000mm/4000mm/2700mm, weight: approx. 5000kg. On-site inspection is possible.

Travel X/Y/Z: 700mm/500mm/600mm, speed: 6300rpm, power: approx. 10kW, feed X/Y/Z: 4m/min, rapid traverse X/Y/Z: 10m/8m/10m/min, machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, weight: approx. 6000kg, operating hours: 65425h. On-site inspection is possible.

A CNC vertical machining center Akira Seiki is available. Travel X/Y/Z: 2060mm/850mm/815mm, spindle-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repetition accuracy: +/-0.005mm. Tool positions: 28, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Mitsubishi 70, documentation available. On-site inspection is possible.

A CNC vertical machining center Akira Performa with a counter bearing on the A-axis is available. Travel X/Y/Z: 2060mm/850mm/815mm, spindle-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repetition accuracy: +/-0.005mm. Tool positions: 28, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Siemens 828, documentation available. On-site inspection is possible.

Arm length: 1000mm, max. drilling diameter steel/cast iron: 32mm/40mm, spindle stroke: 250mm, spindle holder: MK4, max. tapping capacity: M20, spindle table distance min./max.: 270mm/1040mm, table dimensions X/Y/Z: 1150mm/800mm, speed: 4500rpm. Machine dimensions X/Y/Z: approx. 1700mm/1100mm/2600mm, weight: approx. 2000kg. The emergency stop switch of the machine is defective. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool ...

Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible.

Four Chiron CNC machining centers are available. Travel X/Y/Z: 1250mm/840mm/550mm, rapid traverse X/Y/Z: 60m/min, speed: 12000rpm, power: 22.5kW, torque: 140NM, tool positions: 24, tool holder: HSK-63, max. tool length: 320mm, machine weight: approx. 10000kg, control: Siemens 840D. Including IKZ, chip conveyor and Fibro swivel axis. Documentation available. On-site inspection is possible. Individual sale possible.

Offer 25118 Specifications: - Tapping capacity approx. M 3 - M 8 - Working range ( swivel radius ) approx. 1800 mm - Multi-position head - Speeds: 8 - 700 rpm - Quick-change tool mount size 1 dia.19 - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space requirement approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: HEIDENHAIN control: MillPlus iT table surface area: ø 500 x 380 mmB-axis: 0 - 161,955 °C-axis: 360 °spindle taper: SK 40 spindle turning speed range: 20 - 18.000 U/minspindle power: max. 35 kWmax. torque on the spindle: max. 130 Nmfeeds -stepless-: bis 20.000 mm/minrapid traverse X/Y/Z axis: 80 / 50 / 50 m/minrapid traverse B-axis: 40 U/minC-axis rapid feed: 50 U/minno. of tools in magazin: 30 tool diameter if 2 vacant positions: 130 mmtool diametre at full load: 80 mmtool length - max.: 300 mmweight of tools max.: 6 kginternal coolant system feed: 40 bartotal power requirement: 52 kVAweight of the machine ca.: 6 t= 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter deviceThe data for this ad was created with ModulMWS - the software solution of Log ...

bore capacity in steel (diameter): 35 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 4 table-size: 500 x 400 mmspindle turning speed range: 75 - 3.010 U/minfeed range - boring: 0,1 / 0,15 / 0,22 / 0,33 mm/Uquill stroke: 150 mmvoltage: 400 Vtotal power requirement: 1,8 kWweight of the machine ca.: 275 kgdimensions of the machine ca.: 0,70 x 1,00 x 1,95 mthreading device: - Serial-No.: 138050673- Electromagnetic feed- Threading device- Machine vice 150 mm- Two clamping screws 14 mm- 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3- Cutting oil sprayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 245 mmbore stroke: 135 mmspindle taper MT: 3 table-size: 410 x 380 mmspindle turning speed range: 10 - 2100 U/minvoltage: 400 Vtotal power requirement: 1,1 kWweight of the machine ca.: 210 kgdimensions of the machine ca.: 0,7 x 1,8 x 1,75 mthreading device: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: OSP-P 300S X-axis: 690 mm Y-axis with stroke: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80-fold Equipment: - Collision avoidance system - Tool monitoring system - Tool measuring device - Tool calibration - Sub-spindle with tailstock function - Renishaw touch probe - Door automation - NC bezel support with bezel SMW SLU-Z 3.2 - ONE touch IGF - Hinged belt conveyor - Main spindle replaced in 2022

x-travel: 1520 mmy-travel: 520 mmz-travel: 460 mmControl: Siemens 840D turning speeds: 12.000 U/mintool change unit: 32-fach tool taper: SK 40 0: 19 kWrapid traverse: 32 m/minB-axis (table): +110 / -90 °total power requirement: kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: 3,5x2,6x3,0 m5 axes simultaneous machining- CNC control Siemens 840D- 32-position tool changer (SK 40)- Blast air through spindle- Internal coolant supply 80 bar- Automatic door- Rotary and tilting table: 650x540mm, 500kg- Fixed table: 920x540mmapprox. 5000h running hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 13 mm

Made in Germany Drill chuck: B 16 Speed: 480 - 4,000 rpm

Control Ultimax 3-4 2 color screens (text + graphics) Travel X/Y/Z 1020/510/610 mm Speed 8000 1/min Tool magazine for 24 Wkz. SK 40 DCF Software

spindle diameter: 125 mmx-travel: 1120 mmy-travel: 710 mmz-travel: 315 mmw-axis: 630 mmsize of pallet: 1400 x 900 mmtable load: 2 tnumber of T-slots: 9 Stückdistance between columns: 1080 mmdistance between table/spindle: 900 mmtool taper: SK 45 feed speeds: 16 - 500 mm/minrapid traverse: 10 m/minspindle motor: 5,5 kWspindle turning speed range: 28 - 1400 U/minmax. torque on the spindle: 250 Nmtotal power requirement: 7 kWweight of the machine ca.: 7,5 tspace requirements approx. LxWxH: - mDOUBLE COLUMN JIG BORING MACHINE- Hydraulic Unit- CoolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 4000 mmy-travel: 3000 mmz-travel: 2000 mmw-axis: 800 mmtable:: 1800 x 2500 table load: 20 tfeed range: 4 - 5000 mm/minspindle turning speed range: 10 - 3000 U/minspindle taper ISO: 50 spindle motor: 37 kWrapid traverse: 10 m/minControl: Heidenhain iTNC 530 total power requirement: 70 kWweight: 39 trange L-W-H: 8,5 x 8,6 x 5,5 mmequipped with- CNC control Heidenhein iTNC 530 & handwheel- 60-fold tool changer (ISO 50)- NC rotary table 1800 x 2500mm, 20t- IKZ and external coolant supply 20bar- chip conveyor- spindle supportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mikron WF31D Precision Milling and Drilling Machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Technical Specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shifting step gearbox and Poly-V belts. Vertical spindle can be extended by 90 mm; Conversion from vertical to horizontal machining possible. Ball screws with DC drives allow simultaneous feed movements. Guides are protected against dust, chips and coolant. Specifications Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Perpendicular movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equip ...

thread dia.: M16 - M42 metrisch: 50 - 200 U/min.working area: max. 1300 mmengine output: 1,2 kWweight: 105 kgdimensions: 0,85 x 0,85 x 0,3 mmElectric tapping machines for M16 - M42 threads,Angle adjustable.8 pcs. Quick-change chuck with slip clutch.Adjustable via display:variable speed, adjustable depth, material selection, choice ofMain direction of rotation, thread selection.Documentation in English!Options:Clamping table with grooves Type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50,0 mmarm length: 1.350 mmworkpiece height max.: 1630 mmturning speeds: 19 - 1320 U/minbore spindles - Morse Taper: 5 MKengine output: 5,5 kWweight: 5 trange L-W-H: 2,4 x 1,0 x 3,55 mmfeed movement: 475 mmfloor plate size:: 1650x1000 mmfeeds: 0,07-2,9 mm/UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Axis: 3 serial number: 84095 tool taper: BT40 toll turrets: 12 table surface area: 1300 x 400 mmno. of flutes: 3 T-Nuten T-slot - width: 18 mmcontrol: FANUC dimensions: ca. 3000 x 2500 x 2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 510 mmy-travel: 510 mmz-travel: 510 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control MSC 80325-fold automatic tool changercoolant deviceTechnische Daten / technical details:Verfahrweg X / X-Travel 510 mmVerfahrweg Y / Y-Travel 510 mmVerfahrweg Z / Z-Travel 510 mmTischgröße / table size 750x548 mmDrehzahlbereich / spindle speed 8000 UpM /rpmAnzahl der Werkzeugplätze / tool places in changer 25 fachAntriebsleistung Spindel / drive capacity spindle 11 kWGewicht der Maschine ca. / weight 4500 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): 1000 x 800 mmFor sale are 51 machine pallets for Burkhard and Weber MCR 120The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.000 mmy-travel: 1.000 mmz-travel: 1.000 mmControl: 840 D SiemensMain spindle:: turning speed range - main spindle: 20 - 18.000 min/-1power capacity - main spindel: 28 / 19 kWmax. Torque: 121 Nmtool taper: HSK-A63 NC-Swivle milling head:: swivellable: B: -30 / +180 °swivle time: 1,2 spallet changer:: numbers of pallets: 2 size of pallet: 1.000 x 800 mmmax. workpiece weight: 1.500 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 180 pos.tool taper: HSK-A63 total power requirement: 78 kVAweight of the machine ca.: 27,0 tdimensions of the machine ca.: 8,0 x 7,0 x 3,4 mDocuments: Chip conveyor: Coolantsystem: through spindle coolant: pallet changer: Automatic Tool Changer: full splash guard: Rotary screen: elektr. hand wheel: 5 Axis - CNC Machining Center UniversalDECKEL MAHO - DMC 100 U duoBLOCK- Swivel-Milling-Head (B-Achse)- NC-Rotary (C-Axis)- pallet ...

x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmcontrol: SLIMline SiemensMain spindle:: turning speed range - main spindle: 20 - 12.000 min/-1power capacity - main spindel: 13 / 9 kWTorque: 83 / 57 Nmtool taper: SK 40 work table:: table surface area: 790 x 560 mmnumber of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mmT-slot - distance: 100 mmmax. table load: 600 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6 kgTotal weight, approx.: max. 60 kgfeeds:: feed speeds: max. 20.000 mm/minrapid traverse: 30 m/mintotal power requirement: 17 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 4,0 x 2,8 mDocuments: Chip conveyor: Coolantsystem: through spindle coolant: 12 bar Renishaw: exhaust fan: Coolant-Air-Blast-Cha ...