We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (7)
- Automatic Drillers (3)
- Automatic thread drills (3)
- Battery powered drilling machines (8)
- Bench Type Drilling Machines (59)
- Boring Mills (45)
- Centre Drilling Machines (3)
- CNC Boring Mills (30)
- Co-Ordinate Drilling Machines, Vertical (2)
- Column-Type Drilling Machines (150)
- Contracting Pods Panel Drills (13)
- Core-drilling machines (3)
- Deep Hole Drilling Machines (59)
- Drilling And Milling Machines (20)
- Drilling Centres (2)
- Drilling Machines (50)
- Gang Drilling Machines (5)
- High Performance Drilling Machines (8)
- High Speed Drilling Centres (HSC) (2)
- High Speed Machining Centres (HSC) (9)
- High Speed Radial Borers (17)
- Horizontal Boring And Milling Centres For Cubical Workpieces (5)
- Horizontal Numerically Controlled Machining Centres (53)
- Horizontal Processing Centers (35)
- Indexing Drum Drilling Automatics (1)
- Jig Borers (3)
- Jig boring machines (16)
- Jig Boring Machines, Vertical (2)
- Magnetic drilling machines (8)
- Metal processing centers (1)
- Milling machine centers (17)
- Milling machining centres (3)
- Multi Spindle Bar Maschines (1)
- Multi Spindle Drilling Machines (31)
- Multiway Drilling And Boring Machines (5)
- Numerically Controlled Machining Centres (281)
- Other Drilling And Boring Machines (2)
- Other Machining Centres (15)
- Panel Drills (17)
- Pillar-Type Drilling Machines (27)
- Portal machining centres (5)
- Processing Centers (249)
- Profile processing centres (1)
- Radial Drilling Machines (88)
- Round Turntables (7)
- Special drilling machines (50)
- Special Purpose Drilling And Boring Machines (1)
- Special Purpose Machining Centres (1)
- Standing Drills (2)
- Table Drills (55)
- Tapping Machines (25)
- Tool machining centres (1)
- Transmission drills (3)
- Turning-machining centres (9)
- Universal processing centres (66)
- Vertical Boring And Milling Centres For Cubical Workpieces (2)
- Vertical Numerically Controlled Machining Centres (111)
- Vertical Processing Centers (236)
- Vices For Machines (11)
- more
- ABA (2)
- ABARBOGA MASKINER (1)
- ABB (1)
- ABENE (1)
- ABM (8)
- ACCUWAY (1)
- Aciera (3)
- ADAM (1)
- AEG (3)
- AERRE (1)
- AES (1)
- AES GROUP (1)
- AGEMA (1)
- AGIE (1)
- AGIE CHARMILLES (5)
- AGW BOCKLENBERG (1)
- Akira Seiki (2)
- ALBERTI (1)
- ALBRECHT (1)
- ALKETT (1)
- ALLOY WHEEL M... (1)
- Alzmetall (72)
- AMADA (1)
- ANAYAK (3)
- ANGER (5)
- APRA NET (1)
- ARBOGA (8)
- ARBOGA MASKINER (1)
- ARCHDAHLE (1)
- Artykuly Techniczne (6)
- ASDORF (1)
- AUDAX (1)
- AUERBACH (1)
- AVIA (1)
- AWEA (6)
- AXA (19)
- AXON LITZ (1)
- BACCI (1)
- BARON MAX (1)
- BATLIBOI (1)
- Battenfeld (2)
- BECK (1)
- BECKHOFF (1)
- BERGMANN (1)
- Bergonzi (2)
- Bernardo (16)
- BERNHARD STEINEL (1)
- BERNSTAIN (1)
- BEYER (2)
- BFW (3)
- Bierrebi (3)
- Bierrebi LEA SRL. (9)
- BIESSE (1)
- Bilz (3)
- Bimak (2)
- Bimatec Soraluce (3)
- BIZERBA (1)
- BJM BECKHOFF (1)
- BJM Miksch (2)
- BLANSKO (1)
- BLUETOOTH CNC (1)
- BLUTHARDT (6)
- BLUTHARDT/PARABO (1)
- BMW (2)
- Boehringer (3)
- BORNEMANN (1)
- Borsig (2)
- BOSTOMATIC (1)
- BREDA (1)
- BREDA / GI-EFFE-DI (1)
- BRIDGEPORT (11)
- BRIDGEPORT - HARD... (1)
- BRIDGEPORT HARDINGE (1)
- BROTHER (10)
- BUCKUHLY (1)
- BUFFALO MACHINERY (1)
- BUMOTEC (1)
- BURGSMUELLER (1)
- BURKHARD UND WEBER (1)
- BURKHARDT + WEBER BW (1)
- BüHRER (1)
- C.B.FERRARI (1)
- Caber (2)
- Castel (3)
- CERUTI (1)
- CHARMILLES (3)
- CHEMNITZER MASCHINENBAU (1)
- CHEMNITZER MB (1)
- Chiron (53)
- CINCINATI MILACRON (1)
- CINCINNATI (9)
- CINCINNATI MILACRON (2)
- CMA (6)
- CME (1)
- CNC-STEP (7)
- COBALM (1)
- COILTEC (1)
- COLGAR (3)
- Collet (4)
- COLLET + ENGELHARD (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 101)
ABA 2
ABB 1
ABENE 1
ABM 8
ACCUWAY 1
Aciera 3
ADAM 1
AEG 3
AERRE 1
AES 1
AGEMA 1
AGIE 1
ALBERTI 1
ALBRECHT 1
ALKETT 1
Alzmetall 72
AMADA 1
ANAYAK 3
ANGER 5
APRA NET 1
ARBOGA 8
ASDORF 1
AUDAX 1
AUERBACH 1
AVIA 1
AWEA 6
AXA 19
BACCI 1
BATLIBOI 1
BECK 1
BECKHOFF 1
BERGMANN 1
Bergonzi 2
Bernardo 16
BEYER 2
BFW 3
Bierrebi 3
BIESSE 1
Bilz 3
Bimak 2
BIZERBA 1
BLANSKO 1
BMW 2
Borsig 2
BREDA 1
BRIDGEPORT 11
BROTHER 10
BUCKUHLY 1
BUMOTEC 1
BüHRER 1
Caber 2
Castel 3
CERUTI 1
Chiron 53
CMA 6
CME 1
CNC-STEP 7
COBALM 1
COILTEC 1
COLGAR 3
Collet 4
CONDAIR 1
CORDIA 6
CORNAC 1
Csepel 3
CYBERNET 1
DAEWOO 1
DAHLIH 1
DART 1
DECKEL 10
DECKEL MAHO 86
Deckel-MAHO 16
DEFUM 6
DEGEN 1
Depo 2
DEUMA 1
DIHART 1
DIVERS 1
diverse 3
DIXI 1
DKF 1
DMC 3
DMG 46
DMG MORI 58
DMG-Mori 10
DMU 1
Donau 17
DOOSAN 21
DORMER 1
DUGARD 1
DUMETA 6
EBERLEI 1
Einhell 2
Elan 2
ELHA 5
ELMAG 6
ELU 1
elumatec 10
EMA 1
EMAG 1
EMCO 6
EMMEGI 2
ENSHU 3
ERD 2
Erlo 16
EUMACH 1
EWAG 2
FADAL 6
FAMU 1
Famup 5
FANUC 10
FEELER 2
FEHLMANN 12
FEIN 1
FELLER 1
FERVI 1
FIDIA 3
FIRST 2
FLOTT 48
FORMAT 2
FPT 4
FRORIEP 5
FSA 1
FUJITSU 1
GARANT 1
GEORG 1
GERARDI 1
GIANA 1
GILLARDON 21
GIRARDS 1
GOSMETA 1
GOTHA 1
GROB 1
GSP 1
Gühring 3
GüNTHER 1
HAAS 34
HACO 1
HAEFNER 1
Hardinge 2
HARTFORD 10
Hauser 3
HBM 16
HECKERT 6
HEDELIUS 25
HEGNER 1
HELLER 17
Hermle 26
HETTNER 1
HIMMEL 2
HKS 2
HOLZMANN 2
HTT 1
HURCO 39
HURON 6
HUVEMA 5
HWACHEON 7
HYUNDAI 3
IBARMIA 8
IMATEC 1
IMF 4
IMSA 2
INDEX 1
INNSE 1
INONET 1
approved
dealer
dealer
x-travel: 510 mmy-travel: 510 mmz-travel: 510 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control MSC 80325-fold automatic tool changercoolant deviceTechnische Daten / technical details:Verfahrweg X / X-Travel 510 mmVerfahrweg Y / Y-Travel 510 mmVerfahrweg Z / Z-Travel 510 mmTischgröße / table size 750x548 mmDrehzahlbereich / spindle speed 8000 UpM /rpmAnzahl der Werkzeugplätze / tool places in changer 25 fachAntriebsleistung Spindel / drive capacity spindle 11 kWGewicht der Maschine ca. / weight 4500 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L,W): 1000 x 800 mmFor sale are 51 machine pallets for Burkhard and Weber MCR 120The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 1.000 mmy-travel: 1.000 mmz-travel: 1.000 mmControl: 840 D SiemensMain spindle:: turning speed range - main spindle: 20 - 18.000 min/-1power capacity - main spindel: 28 / 19 kWmax. Torque: 121 Nmtool taper: HSK-A63 NC-Swivle milling head:: swivellable: B: -30 / +180 °swivle time: 1,2 spallet changer:: numbers of pallets: 2 size of pallet: 1.000 x 800 mmmax. workpiece weight: 1.500 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 180 pos.tool taper: HSK-A63 total power requirement: 78 kVAweight of the machine ca.: 27,0 tdimensions of the machine ca.: 8,0 x 7,0 x 3,4 mDocuments: Chip conveyor: Coolantsystem: through spindle coolant: pallet changer: Automatic Tool Changer: full splash guard: Rotary screen: elektr. hand wheel: 5 Axis - CNC Machining Center UniversalDECKEL MAHO - DMC 100 U duoBLOCK- Swivel-Milling-Head (B-Achse)- NC-Rotary (C-Axis)- pallet ...
approved
dealer
dealer
x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmcontrol: SLIMline SiemensMain spindle:: turning speed range - main spindle: 20 - 12.000 min/-1power capacity - main spindel: 13 / 9 kWTorque: 83 / 57 Nmtool taper: SK 40 work table:: table surface area: 790 x 560 mmnumber of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mmT-slot - distance: 100 mmmax. table load: 600 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6 kgTotal weight, approx.: max. 60 kgfeeds:: feed speeds: max. 20.000 mm/minrapid traverse: 30 m/mintotal power requirement: 17 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 4,0 x 2,8 mDocuments: Chip conveyor: Coolantsystem: through spindle coolant: 12 bar Renishaw: exhaust fan: Coolant-Air-Blast-Cha ...
approved
dealer
dealer
bore capacity in steel (diameter): 6 mmthroat: 204 mmbore stroke: 90 mmdistance table - lower edge spindle: -265 mmColumn diameter: 60 mmspindle turning speed range: 700 - 5600 U/mintotal power requirement: 0,43 kWweight of the machine ca.: 73 Kgdimensions of the machine ca.: TBH 0,63 x 0,37 x 0,72 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
spindle diameter: 140 mmx-travel: 12500 mmy-travel: 3000 mmz-travel: 800 mmtool taper: ISO 50 dimension of the ram: - mmturning speed range - spindle: 1000 U/minmain drive: - kWtable surface area: 3000 x 2100 mmV-axis: 1500 mmtable load: 25 tcontrol: TNC 420 total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mequipped with- CNC control Heidenhain TNC 430- NC rotary table 3000 x 2100mm, 25t- Telescopic steel sheet covers- Panel field (several sizes)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workare ...
approved
dealer
dealer
table length: 3000 mmtable width: 2000 mmtable load: 200 ttotal power requirement: kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 11500 mmy-travel: 4500 mmspindle diameter: 200 mmw-axis: 1600 mmz-axis: 2000 mmRotary table: 3000 x 4000 mmtool adaptor: 80 tbed length: 4600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mincl. 15 plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
table length: 3500 mmtable width: 1750 mmtable load: 350 ttotal power requirement: kWweight of the machine ca.: 4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 75 mmtotal power requirement: 14 kWweight of the machine ca.: 10 t- capacity at boring: 75 mm ( St 45 )- spindle diam. 115 mm- taper in spindle: 110 mm/ Morse 6- distance column to drilling spindel: 500.. . 2000 mm- vertical adjustment of arm: max. 1100 mm- distance column to drilling spindel: 450.. 2000 mm- drilling depth: 450 mm- range of speeds: 12,5 ...1600 U/ min // rpm- feed: 0,63 ... 3,15 mm / U- angle of arm: 360 °The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
arm length: 300... 1600 mmbore radius max./min: 1800 mmbore capacity in steel (diameter): 56 mmthreading: max. 65 mmbore depth: 400 mmtool taper: MK 5 base plate: 1700 x 1000 mmturning speed range - drilling: 14...1800 U/minfeed: 0,0315...1,6 m/mintotal power requirement: 4,5 kWweight of the machine ca.: 7,13 tdimensions of the machine ca.: m- distance Spindle head to base: max. 1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 2000 x 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
table-size: 280 x 360 mmquill stroke: 120 mmtotal power requirement: 0,8 kWweight of the machine ca.: 350 kgdimensions of the machine ca.: m- Manufacturer: Chemnitzer Maschinenbau GmbH Chemnitz- speed (stepless): 460 - 1840 U/min , 140 - 560 U/min- Table dimensions: 280 x 360 mm- Adjustment travel table: 540 mm- Holder: MK 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 50 mmthroat: 355 mmbore stroke: 280 mmspindle taper: MK 5 spindle head adjustment: vertikal 280 mm motorischfeed: 0,11-1,73/9step mm/minturning speeds: 32-1400/12step U/mintable-size: 770 x 640 mmsurface area: 630 x 500 mmbase plate: 490 x 530 mmtotal power requirement: 8,1 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1,25 x 0,8 x 2,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
travel: 600 mmlength: 450 mmwidth: 400 mmspindle turning speed range: 20 4500 U/minControl: Heidenhain TNC 425 weight: 3300 kgdimensions of the machine ca.: 4,0 x 3,8 x 2,1 mtotal power requirement: 15 kWtool taper: HSK A 63 table-size: 850 x 440 mm3-axis machining centreThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
table-size: 1800 x 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 60 mm / MK5arm length: 1600 mmquill stroke: 310 mmspindle speed:: 28...2500 U / mintable-size: 1470 x 986 mmtotal power requirement: 4 kWweight of the machine ca.: 4,6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 800 mm W-axis travel: 1250 mm rotating range B-axis from: 0 ° rotating range B-axis up to: 360 °WORKING RANGE -BORING- drilling depth (max): 800 mm drilling capacity full bore (steel): 25 mmSPINDLE / HEAD tool fixture: HSK A50 drive power: 15 kWAXIS DRIVES feed velocity (max): 15000 mm/minTOOL MAGAZINE number of positions: 20 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 5600 mm space requirements -front/back-: 4910 mm total heig ...
approved
dealer
dealer
Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement
approved
dealer
dealer
spindle diameter: 135 mmx-travel: 1000 mmy-travel: 700 mmz-travel: 300 mmcross rail adjustment - vertical: 780 mmdistance between table/spindle: 1000 mmtable surface area: 1100 x 842 mmdistance between columns: 1100 mmtable load: 1500 kgtool taper: SK 45 spindle turning speed range: 2400 U/minspindle drive: 5,9 kWfeed range: 1 - 6000 mm/minweight of the machine ca.: 10,6 tdimensions of the machine ca.: mRetrofit / overhauling in May 2005 (with geometric measurement):- New Heidenhain iTNC-530 control- New electronics- New Siemens servomotors- Heidenhain glass scales- Revision of drilling spindle unit(total costs € 118,436.00)Equipment:Infrared measuring probe m&h 38.10-MINIElectron. HandwheelVarious tool holdersTransport dimensions:- Machine (LxWxH) 3500 x 2600 x 2750 mm- Control cabinet (LxWxH) 2300 x 600 x 2300 mm- Hydraulic (LxWxH) 800 x 600 x 1000 mmThe data for this ad was create ...
approved
dealer
dealer
Specifications: - Drilling capacity in wood 40 mm - Drilling capacity in steel 18 mm - Drilling spindle holder MK 2 - Quill stroke 120 mm - Drilling spindle speeds infinitely variable in steps - 60 - 2840 rpm - Max. distance table – drilling spindle 600 mm - Boom / unit tiltable left + right 45° each - Boom / unit swivel left + right - Table size 450 x 450 mm - Drive 400 V / 0.33 / 0.55 kW - Space requirement approx. W 500 x H 1870 x D 1200 mm - Weight approx. 150 kg
approved
dealer
dealer
bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 460 x 460 mmturning speeds: 75 - 3200 U/minengine output: 1,5 kWcolumn diameter: 125 mmthread: M16 ST60feed: 0,10/0,18/0,26 mm/Udimensions: 800 x 500 x 2200 mmweight: 350 kg- automatic drill feeds (magnetic clutch)- Height adjustable and angle adjustable table- Movable work table- Integrated cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
CNC Machining Center Hedelius BC 100 P-3500 Magnum Control: Siemens Sinumerik 840D Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm T-slots 5 pieces Distance T-slots 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Mount: DIN 69871 SK 50 Tool magazine: 50 – compartment Spindle speed: 20 - 4,500 rpm Accessories - Door automation - Handheld operator - Machine hood -Conveyor
approved
dealer
dealer
x-travel: 800 mmy-travel: 400 mmz-travel: 350 mmtotal power requirement: 40 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 40 mmthroat: 275 mmbore stroke: 120 mmspindle taper: MK 4 turning speed range: 75 - 3200 U/min: 190 mm: 490 mmtable surface area: 700 x 210 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmtotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,8 x 0,75 x 1,85 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
spindle diameter: 0 mmx-travel: 700 mmy-travel: 600 mmtable length: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDouble Column Design Jig BorerTablesize: 800 x 600mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
thread dia.: M6 - M22 mm: 60/200 U/min.: 105 Nmair pressure: 6 - 8 barworking area: 400 - 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 60 mmthroat: 420 mmbore stroke: mmtotal power requirement: 4 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: mDrilling Ø, steel or cast iron 60 mmBoring Ø with pre-bore ½ 100 mmTable Ø 600 mmDistance between spindle and column 420 mmSpindle taper MK512 spindle speeds 120 - 800 rpmQuill stroke 270 mmMounting height above rotary table 800 mmMounting height above base plate 1,400 mm8 drilling feeds 0.13 - 1.8 rpmSpindle drive 4 kW Total electrical load, approx. 4 kW - 380 V - 50 HzWeight approx. 2,600 kgAccessories / Special Features Manual height adjustment of boring head. 2-speed motor drive. Swing-out rotary table. Machined base plate (for setting up workpieces).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 3 - 5 mmthroat: 150 mmbore stroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mVarious Special purpose drilling machinesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
