boring mills and machining centers used for sale (3,234)

Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available.

Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355.

Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available.

Travel X/Y/Z: 700mm/300mm/1000mm, rapid traverse X/Y/Z: 4000mm/4000mm/2000mm /min, drilling method: ELB, number of drilling spindles: 1, min./max. drilling diameter: 4mm/30mm, max. drilling depth: 1000mm, table dimensions X/Y: approx. 850mm/750mm.

Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible.

Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available.

Arm length: 1000mm, max. drilling diameter steel/cast iron: 32mm/40mm, spindle stroke: 250mm, spindle holder: MK4, max. tapping capacity: M20, spindle table distance min./max.: 270mm/1040mm, table dimensions X/Y/Z: 1150mm/800mm, speed: 4500rpm. Machine dimensions X/Y/Z: approx. 1700mm/1100mm/2600mm, weight: approx. 2000kg. The emergency stop switch of the machine is defective. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool ...

A CNC universal milling and drilling center SHW is available. Travel X/Y/Z: 6000mm/2100mm/1500mm, milling head swivel: 180°, rapid traverse X/Y/Z: 8m/min, speed: 4500rpm, spindle power: 31.5kW, machine dimensions X/Y/Z: approx. 11000mm/9000mm/6000mm, weight: approx. 44000kg. Documentation available. On-site inspection is possible.

Number of drilling heads: 4.

Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible.

Travel X/Y/Z: 400mm/300mm/495mm, spindle center table distance: 25mm-325mm, spindle nose table distance: 125mm-620mm, rapid traverse: 24m/min, feed rate: 5m/min, spindle type: ball screw, spindle diameter: 36mm, speed: 6000rpm, spindle power: 5.5kW, spindle mount: BT40. Tool slots: 30, tool change time: 2.5s, clamping time: 7s, max. tool diameter/length: 110mm/250mm, max. tool weight: 8kg. Table dimensions X/Y: 315mm/315mm, table angle: 7.5°, table clamping force: 3400kg, max. workpiece weight: 150kg. Dimensions X/Y: approx. 1900mm/2300mm, weight: approx. 4500kg, control: Fanuc 0-M, operating hours: 732h, piece counter: 172776. Including cooling lubricant system and tool magazine with 30 places. Documentation available. On-site inspection is possible.

Four Chiron CNC machining centers are available. Travel X/Y/Z: 1250mm/840mm/550mm, rapid traverse X/Y/Z: 60m/min, speed: 12000rpm, power: 22.5kW, torque: 140NM, tool positions: 24, tool holder: HSK-63, max. tool length: 320mm, machine weight: approx. 10000kg, control: Siemens 840D. Including IKZ, chip conveyor and Fibro swivel axis. Documentation available. On-site inspection is possible. Individual sale possible.

Offer 25118 Specifications: - Tapping capacity approx. M 3 - M 8 - Working range ( swivel radius ) approx. 1800 mm - Multi-position head - Speeds: 8 - 700 rpm - Quick-change tool mount size 1 dia.19 - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space requirement approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

CNC Machining Center Kunzmann WF 650 Control: Heidenhain iTNC 640 Year of Make: 2017 Travel: X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Manual swivel of the milling head: -5° / + 95° Round table top: Ø 400 mm Centering hole: Ø102 H7 A-axis (swingarm): +/- 30 s C-axis rotary table: +/- 10 s Swivel range A-axis: -120/-95° C-axis rotation range: 360° rotation Mount: SK 40 DIN69871 Tool magazine: 60-fold Spindle speed: 1 – 12,000 rpm Accessories - Coolant system - IKZ with high-pressure pump - Electronic handwheel -Conveyor - 3D probes

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: HEIDENHAIN control: MillPlus iT table surface area: ø 500 x 380 mmB-axis: 0 - 161,955 °C-axis: 360 °spindle taper: SK 40 spindle turning speed range: 20 - 18.000 U/minspindle power: max. 35 kWmax. torque on the spindle: max. 130 Nmfeeds -stepless-: bis 20.000 mm/minrapid traverse X/Y/Z axis: 80 / 50 / 50 m/minrapid traverse B-axis: 40 U/minC-axis rapid feed: 50 U/minno. of tools in magazin: 30 tool diameter if 2 vacant positions: 130 mmtool diametre at full load: 80 mmtool length - max.: 300 mmweight of tools max.: 6 kginternal coolant system feed: 40 bartotal power requirement: 52 kVAweight of the machine ca.: 6 t= 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter deviceThe data for this ad was created with ModulMWS - the software solution of Log ...

bore capacity in steel (diameter): 35 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 4 table-size: 500 x 400 mmspindle turning speed range: 75 - 3.010 U/minfeed range - boring: 0,1 / 0,15 / 0,22 / 0,33 mm/Uquill stroke: 150 mmvoltage: 400 Vtotal power requirement: 1,8 kWweight of the machine ca.: 275 kgdimensions of the machine ca.: 0,70 x 1,00 x 1,95 mthreading device: - Serial-No.: 138050673- Electromagnetic feed- Threading device- Machine vice 150 mm- Two clamping screws 14 mm- 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3- Cutting oil sprayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 245 mmbore stroke: 135 mmspindle taper MT: 3 table-size: 410 x 380 mmspindle turning speed range: 10 - 2100 U/minvoltage: 400 Vtotal power requirement: 1,1 kWweight of the machine ca.: 210 kgdimensions of the machine ca.: 0,7 x 1,8 x 1,75 mthreading device: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: OSP-P 300S X-axis: 690 mm Y-axis with stroke: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80-fold Equipment: - Collision avoidance system - Tool monitoring system - Tool measuring device - Tool calibration - Sub-spindle with tailstock function - Renishaw touch probe - Door automation - NC bezel support with bezel SMW SLU-Z 3.2 - ONE touch IGF - Hinged belt conveyor - Main spindle replaced in 2022

x-travel: 1520 mmy-travel: 520 mmz-travel: 460 mmControl: Siemens 840D turning speeds: 12.000 U/mintool change unit: 32-fach tool taper: SK 40 0: 19 kWrapid traverse: 32 m/minB-axis (table): +110 / -90 °total power requirement: kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: 3,5x2,6x3,0 m5 axes simultaneous machining- CNC control Siemens 840D- 32-position tool changer (SK 40)- Blast air through spindle- Internal coolant supply 80 bar- Automatic door- Rotary and tilting table: 650x540mm, 500kg- Fixed table: 920x540mmapprox. 5000h running hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 13 mm

Made in Germany Drill chuck: B 16 Speed: 480 - 4,000 rpm

Control Ultimax 3-4 2 color screens (text + graphics) Travel X/Y/Z 1020/510/610 mm Speed 8000 1/min Tool magazine for 24 Wkz. SK 40 DCF Software

spindle diameter: 125 mmx-travel: 1120 mmy-travel: 710 mmz-travel: 315 mmw-axis: 630 mmsize of pallet: 1400 x 900 mmtable load: 2 tnumber of T-slots: 9 Stückdistance between columns: 1080 mmdistance between table/spindle: 900 mmtool taper: SK 45 feed speeds: 16 - 500 mm/minrapid traverse: 10 m/minspindle motor: 5,5 kWspindle turning speed range: 28 - 1400 U/minmax. torque on the spindle: 250 Nmtotal power requirement: 7 kWweight of the machine ca.: 7,5 tspace requirements approx. LxWxH: - mDOUBLE COLUMN JIG BORING MACHINE- Hydraulic Unit- CoolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 4000 mmy-travel: 3000 mmz-travel: 2000 mmw-axis: 800 mmtable:: 1800 x 2500 table load: 20 tfeed range: 4 - 5000 mm/minspindle turning speed range: 10 - 3000 U/minspindle taper ISO: 50 spindle motor: 37 kWrapid traverse: 10 m/minControl: Heidenhain iTNC 530 total power requirement: 70 kWweight: 39 trange L-W-H: 8,5 x 8,6 x 5,5 mmequipped with- CNC control Heidenhein iTNC 530 & handwheel- 60-fold tool changer (ISO 50)- NC rotary table 1800 x 2500mm, 20t- IKZ and external coolant supply 20bar- chip conveyor- spindle supportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mikron WF31D Precision Milling and Drilling Machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Technical Specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shifting step gearbox and Poly-V belts. Vertical spindle can be extended by 90 mm; Conversion from vertical to horizontal machining possible. Ball screws with DC drives allow simultaneous feed movements. Guides are protected against dust, chips and coolant. Specifications Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Perpendicular movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equip ...

x-travel: 625 mmy-travel: 650 mmz-travel: 650 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M16 - M42 metrisch: 50 - 200 U/min.working area: max. 1300 mmengine output: 1,2 kWweight: 105 kgdimensions: 0,85 x 0,85 x 0,3 mmElectric tapping machines for M16 - M42 threads,Angle adjustable.8 pcs. Quick-change chuck with slip clutch.Adjustable via display:variable speed, adjustable depth, material selection, choice ofMain direction of rotation, thread selection.Documentation in English!Options:Clamping table with grooves Type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50,0 mmarm length: 1.350 mmworkpiece height max.: 1630 mmturning speeds: 19 - 1320 U/minbore spindles - Morse Taper: 5 MKengine output: 5,5 kWweight: 5 trange L-W-H: 2,4 x 1,0 x 3,55 mmfeed movement: 475 mmfloor plate size:: 1650x1000 mmfeeds: 0,07-2,9 mm/UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Axis: 3 serial number: 84095 tool taper: BT40 toll turrets: 12 table surface area: 1300 x 400 mmno. of flutes: 3 T-Nuten T-slot - width: 18 mmcontrol: FANUC dimensions: ca. 3000 x 2500 x 2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.