boring mills and machining centers used for sale (3,224)

Key data: 700 mm, 420 mm, 380 mm

Highly Dynamic Vertical Drilling and Tapping Center / 5-Axis Vertical CNC Machining Center DMG Mori DMP 70 With maximum milling performance Year of construction 2023 Siemens 840D solutionline 2-axis NC rotary and swivel table C-axis 360° torque motor C-axis 360° A-axis -120°/+100° Table diameter 290 mm Table load max. 100 kg X = 700 mm Y = 420 mm Z = 380 mm Feeds and rapid traverses X,Y,Z up to 60,000 mm/min. Spindle holder BBT 30 BIG PLUS Spindle drive power 4/6/20 kW Spindle speeds max. 24,000 rpm. Spindle torque max. 40 Nm 25 tool magazine slots Equipped with: Swivel Joint - Deh Feedthroughs with 4 Channels Software package Job Shop and Sinumerik MDynamics 5-axis Data storage expansion 6 GB flash card ShopMill Chip conveyor Paper filter for coolant Spindle cooling 40 bar Workpiece measuring system BLUM TC52 BLUM Z-Nan ...

Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.

Technical data: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

Offer 25498 Technical data: - Drilling capacity 50 mm - Tapping device up to M 40 mm - Tool holder MK 5 - Spindle stroke 280 mm - Spindle speeds 38 - 2000 rpm - 6 feed speeds 0.08 - 0.83 mm/rev - Drive 400 V / 5.5 kW - Radius min. / max. 350 / 1400 mm - Removal of spindle - machined base plates - min / max 350 / 1250 mm - Machined base plate with T-slots W 1650 x D 930 mm - electr. Central clamping - Coolant device + lighting - Dice table - Space requirement approx. W 2300 x H 2400 x D 1050 mm - Weight approx. 3500 kg

2 x BAZ DMG DMU 60T BJ 2000/2002

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmMax machining diameter320 mmSwing diameter over X linear guideways370 mmClamping chuck Ø210 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)6,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable dat ...

Plate boring mill X/Y/Z 13200/3200/1400, built approx. 2010, rebuilt 2016 Siemens Sinumeric 840D with Siemens drives + Heidenhain linear measuring systems. Linear motors in X with cooling unit Delta Therm, Y/Z ball screw Control cabinet air-conditioned with Pfannenberg cooling unit Hydr. Weight compensation, manually adjustable swivel head SK50 Panel field approx. 12000x3500 With UNION rotary table 2000x1800, adjustment range 1250mm + various clamping angle accessories.

Key data: 1100 mm, 600 mm, 600 mm

Vertical CNC Machining Center Manufacturer: Kaast Type V11L Year of construction 2022 Control Siemens 828 Shop Mill Travel X/Y/Z 1100/600/600mm 24 Way Tool Changer Tool holder SK40 max. speed 10,000 rpm Measuring System Linear Glass Scales Chip conveyor Tool Breakage Control Air and coolant cooling Machine is in a used good condition. For more information, I am always available at 0177 8957069. Machine will be available from March 2026.

Key data: 635 mm, 510 mm, 460 mm

Vertical CNC Machining Center Manufacturer Deckel Maho Type DMC 635V Year of manufacture 2005 Control Siemens 840D ShopMill + memory card Travel X/Y/Z 635/510/460mm Spindle speed max. 8,000 rpm Tool holder SK40 20 Compartment Tool Changer Chip conveyor Clamping area 790 x 560mm 4. Axle manufacturer Lehmann The machine is in top condition, geometry very good. Machine will be available from July 2026. For more information, I am also available at 01778957069 at any time. Whatsapp is also possible.

CNC Machining Center Hedelius C50S - 1000 Control: Heidenhain iTNC 530 Year of Make: 2011 Travels: X-axis: 1,000 mm Y-axis: 510 mm Z-axis: 480 mm Clamping area:1,100 x 510 mm Table load: 600 kg Mount: SK 40 Tool magazine: 20 – compartment Spindle speed: 8,000 rpm Rapid traverse x,y,z: 45 m/min Accessories - Screen filter system KM 500 l / IKZ 25bar - Scraper belt conveyor - Handwheel HR 410 - Machine hood

5 axle BAZ DMG DMU 70 BJ 2011

Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible.

Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible.

Key data: 100 mm, 3000 mm

Radial drilling machine CSEPEL RFH-100 / 3000 – technically flawless Description: For sale is a used radial drilling machine / column drilling machine / column drilling machine from the manufacturer CSEPEL, type RFH-100 / 3000. The machine is technically flawless and ready for use in the workshop or production. It is ideal for drilling work on medium to large workpieces. Technical data: Manufacturer: CSEPEL Type: RFH-100 / 3000 Drilling capacity: 100 mm Projection: approx. 3,000 mm Speed range: 18 – 1,800 rpm Spindle holder: MK6 Spindle stroke: approx. 400 mm Feed rate: 0.0375 – 2.0 mm/rev Connected load: 15 kW / 380 V Dimensions (L × W × H): approx. 4,400 × 1,600 × 4,200 mm Condition: technically perfect Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. The machine has no controls anymore. Documentation available. On-site inspection is possible.

Vertical machining center Travel x/ y/ z = 1020/ 600/ 500 mm Table size 1250 x 600 mm max. workpiece weight 800 kg Tool magazine 32 Tool positions HSK 63 Rapid traverse 70 m/min CNC control Heidenhain iTNC 530 Chip conveyor Coolant system

Key data: 750 mm, 600 mm, 520 mm

Universal machining center Spindle speed up to 18,000 1/min; Rapid traverse 50 m/min; Tool magazine 32 tool positions HSK 63; Swivel table - table size 700 x 500 mm; Table load 350 kg; CNC control Heidenhain TNC 530; Chip conveyor; Coolant system

A pillar drilling machine in double column design Ecker und Schmidt is available. Number of spindles: 2, drilling capacity in steel: 23mm, throat depth: 330mm, drilling stroke: 120mm, max. workpiece height: 750mm, spindle taper: MK1, column diameter: 130mm, table dimensions X/Y: 760mm/360mm. Machine dimensions X/Y/Z: approx. 1100mm/1150mm/2100mm, weight: approx. 700kg. On site inspection is possible.

CNC machining center for turning, drilling, milling and grinding. Manufacturer: Klaaßen Type: SDM15-5 Year of Make: 2019 Control: Siemens Sinumerik 840Di sl/840D sl Turning diameter 1500 mm Center width 4500 mm Max. workpiece weight between tips 6 tons Load capacity Klaaßen C-bezel 3 tons 4-lane bed machine Full-fledged milling in 3 axes (Y-axis = 340 mm) Direct measuring system in every CNC axis Infinitely adjustable motor milling spindle Klaaßen motor milling spindle 37 kW / 4000 rpm / 330 Nm(S1) Robot: automatic tool change for turning and milling tools Bezels and tailstock fully movable Internal milling heads Grinding Support Spindle box with backlash-free C-axis ∅1000 mm chuck with through-hole ∅190 Hydraulic Bezel, C-Bezel Load Capacity 3-6 Tons, Tailstock with ∅160 Quill Cross slide unit Spindle box bearing diameter ∅395 mm Oil circulation coo ...

GENERAL Project No.: 905817 Quantity: 1 pcs. Manufacturer: DMG MORI Type: MillTap 700 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Approx. (hrs): 8038 Spindle Approx (hrs): 1166 Program run approx. (hours): 1389 DESCRIPTION MILLING Travel in X 700 mm Travel in Y 420 mm Travel in Z 380 mm Max. rapid traverse speed in X/Y/Z 60/60/60 m/min Max. acceleration in X/Y/Z 10/10/18 m/s2 Direct displacement measurement system X/Y/Z Tool holder BT 30 Max. speed milling spindle 24000 1/min Max. power at ED 10-40/100% 16.3/6 kW Max torque at ED 10-40/100% 48/30 (78 max) Nm Disc tool magazine 25 stations Chip to chip time 1.7 s Machine table 840x420 mm OTHER EQUIPMENT IR Workpiece Probes Tool measurement by means of a probe Splash protection cladding with fully encapsulated working area Oil/Emulsion Mist Extraction System  ...

GENERAL Project No.: 905816 Quantity: 1 pcs. Manufacturer: FANUC Type: Robodrill alpha-D14 MiB Control: Fanuc 31i B Year of Make: 2019 Condition: Used machine Approx. (hrs): 10644 Spindle one approx. (hrs.): 1392 DESCRIPTION MILLING Travel in X 500 mm Travel in Y 400 mm Travel in Z 330 mm Max. rapid traverse speed in X/Y/Z 54/54/54 m/min Max. feed speed in X/Y/Z 30/30/30 m/min Max. acceleration in X/Y/Z 1.4/1.0/1.6 m/s2 Tool holder BT 30 Max. speed milling spindle 10000 1/min Max. power at ED 10-40/100% 26/5.5 kW Max. torque at ED 10-40/100% 35/7.5 Nm Disc tool magazine 21 stations Max. tool diameter 80 mm Max. tool length 250 mm Max. tool weight 3 kg Tool change time 1.6 s Machine table 850 x 410 mm OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Oil/Emulsion Mist Extraction System C ...

GENERAL Project No.: 905815 Quantity: 1 pcs. Manufacturer: FANUC Type: Robodrill alpha-D21 MiB Control: Fanuc 31i B Year of Make: 2019 Condition: Used machine Approx. (hrs): 5937 Spindle Approx (Hrs): 836 DESCRIPTION MILLING Travel in X 500 mm Travel in Y 400 mm Travel in Z 330 mm Max. rapid traverse speed in X/Y/Z 54/54/54 m/min Max. feed speed in X/Y/Z 30/30/30 m/min Max. acceleration in X/Y/Z 1.4/1.0/1.6 m/s2 Tool holder BT 30 Max. speed milling spindle 24000 1/min Max. power at ED 10-40/100% 26/5.5 kW Max. torque at ED 10-40/100% 35/7.5 Nm Disc tool magazine 21 stations Max. tool diameter 80 mm Max. tool length 250 mm Max. tool weight 3 kg Tool change time 1.6 s Machine table 850 x 410 mm OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Coolant Setup GENERAL TECHNICAL DATA Tot ...

GENERAL Project No.: 905814 Quantity: 1 pcs. Manufacturer: FANUC Type: Robodrill alpha-D21 LiB5 Control: Fanuc 31i B5 Year of Make: 2019 Condition: Used machine Approx (hrs): 7778 Spindle one approx. (hrs.): 1819 MILLING Travel in X 700 mm Travel in Y 400 mm Travel in Z 330 mm Max. rapid traverse speed in X/Y/Z 54/54/54 m/min Max. feed speed in X/Y/Z 30/30/30 m/min Max. acceleration in X/Y/Z 1.4/1.0/1.6 m/s2 Tool holder BT 30 Max. speed milling spindle 10000 1/min Max. power at ED 10-40/100% 26/5.5 kW Max. torque at ED 10-40/100% 35/7.5 Nm Disc tool magazine 21 stations Max. tool diameter 80 mm Max. tool length 250 mm Max. tool weight 3 kg Tool change time 1.6 s Machine table 850 x 410 mm OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Oil/Emulsion Mist Extraction System Chip conveyor  ...

Key data: 440 mm, 280 mm, 315 mm

CNC Machining Center MATRA KIRA KN40VS – FANUC 21-M Specifications (KN40VS) Machine Type: 2-Pallet Machining Center Control: FANUC 21-M Travel: X 440 mm / Y 280 mm / Z 315 mm Pallet size: 500 × 300 mm Tool changer: 12-speed Spindle speed: 200–4,500 rpm Drive power spindle: 7.5 kW Equipment / Condition Pallet changer (2-fold) Machine used, inspection/test run possible by arrangement

Manufacturer: Mori Seiki Model NLX 2500 Y/700 Top condition Year of construction 2012 only approx. 6000 operating hours incl. 12 antr. WZ Holders + 17 Static WZ Holders Quick-change system from EWS Hollow clamping device KITAGAWA BB210A821 + KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right ejection Integrated part catcher for main spindle I/F for bar replenishment, LNS Double foot switch with protective cover Signal light (red, yellow, green) Total Counter Workpiece counters EU Tool Holder Package SAUTER BMT60 (T32259, T32260, T32261, T32262) SKM253 MSQP Transformer 45.0 kVA 15 bar Grundfos pump incl. Hydac Filter Cantilever length for driven tools 100 mm (limited Y-axis travel) (Y, SY, SMC)

5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 10,500 mm Y-axis travel: 1100 mm Travel Z-axis: 655 mm B-axis swivel angle: 0° - 90° Angle C-axis: 0° - 360° Max. speed 24,000 rpm Tool changer with 16 standard tool positions plus saw blade and angle head Central lubrication Many tool holders, including angle head and saw blade (500 mm) Minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material tensioners Barcode scanners and label printers Metal chip conveyor Angle head for machining from below Suction for cabin Pendulum operation through two light barrier areas Manual control panel Spindle hours: approx. 7500 Loading is included in the price, machine is already dismantled Weight: approx. 14,000 kg

5-Axis Universal Machining Center DMG Mori ecoMill 50 Control: Heidenhain TNC 620 Year of Make: 2016 Travels: X-axis 500 mm Y-axis 450 mm Z-axis 400 mm B-axis °-5/+110 C-axis °360 Clamping surface rotary axis: Ø 630 x 500 mm Mount: SK 40 Tool Magazine: 32 Slots Speed: 12,000 rpm Accessories - Chip conveyors - 3D Probe Infrared - Table button

General Manufacturer: Spinner Type: U5-1520 Year of Make: 2012 Control: Heidenhain TNC 620 Travel X/Y/Z: X 1,520 mm Y 520 mm Z 460 mm Travel C-axis: 360° B-axis travel: -5°(-50°)/+130° Rapid traverse: 48 m/min Spindle Spindle speed: 12,000 rpm Tool changer: 32-fold Work table Table load: Max. 300 kg Table dimensions: 720×540 mm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Portable Handwheel HR410 TNC620 Option "Software option 2" TNC620 Option "Software option 3" Glass scales in X/Y/Z Preparation for high-pressure flushing Preparation of the interface for Blum infrared probes

General Manufacturer: Chiron Type: DZ 08 W Magnum high speed Control: Siemens 840D Year of Make: 2015 Travel: X 450 mm Y 270 mm Z 310 mm Rapid traverse X/Y/Z: 75 m/min Working spindle Speed: 18,000 rpm Tool holder: HSK 40-A Tool/movement Tool changer: 16-speed Dimensions and weight Weight: approx. 3,600 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Workpiece changing table IKZ Coolant System with Belt Filter Knoll Chip conveyor Oil mist extraction Probes Blum Laser Measurement

Year of construction 2000 Control Siemens CNC 840D Drilling capacity 2.8 - 25 mm max. drilling depth 700 mm Clamping table 600 x 800 mm with hole grid Drill carriage: torque 20 Nm Travel distance 1000 mm Feed rate 0 - 15,000 mm Coolant frequency-controlled Ring Compact Filter 120l/min Accessories: Cantilever belt conveyor Weight approx. 3000 kg