sheet metal working used for sale (3,319)

material width:600 mmmaterial thickness: - 4,0 mmno. of straightening rolls:21 straightening roll diameter:30 mmmaterial cross-cut:1800 mm²speed:6 - 36 m/minPower capacity:4,5 kWWeight:2,0 tDimensions (WxDxH):1,5 x 2,0 x 1,9 m

material width:70 mmmaterial thickness:0 - 1,5 mmfeed length:100 mmmaterial cross-cut:60 mm²feeding force:400 Nclamping force of feeding pincer:1300 Nair pressure - required:3 - 6 barWeight:0,01 tDimensions (WxDxH):0,4 x 0,4 x 0,7 m

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48000 €: 916.8 €: 6 mm: 4 mm: 70 mm: 4000 mm: 550 mm: 8.75 kW: 4250 mm: 720 mm: 2000 mm: 2015 kgEasy operation with mobile control panel with push buttonsBuilt according to EC Safety Directives and has CE MarkOne set of flanging rolls included. Radius can be selected.One set of cutting blades includedMin. cutting diameter: 600 mm (with adapter for small diameter 400 mm)Min. flanging diameter: 550 mm (with adapter for small diameter 350 mm)Rotating speed 70 rpm with adjustable max. torqueTop and bottom flanging rolls powered in rotation with planetary reducersHydraulically adjustable bottom head for both, flat and crowned dish flangingBoth cutting and flanging operation on the same headUsers ManualOptional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on re ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42100 €: 804.11 €: 2035 mm: 3.5 mm: Hydraulisch : 135 °: 3000 mm: 1100 mm: 1750 mm: 2450 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rules(sample photo)ALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 20 mm: 20 mm: 12 mm: 15 mm: 13 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: gebraucht : 1988 : 090151 : prompt, Zwischenverkauf v : Italien : 12800 €: 1 : 42 mm: 4665 mm: 800 mm: 1160 mm: 1470 kg: 42 x 2,5 mm: 40 x 1,2 mm: 30 x 40 x 1,7 mm: 40 x 30 x 1,3 mm: 255 mm: 22 mm: 180 °: 90 °/s : 5,5 kW: 120 lCapacity specifications refer to 400 N/mm²Maximum bending radius with pipe guide rollers: 255 mmMaximum bending radius with pipe guide slide: 175 mmMinimum bending angle: 4°Maximum usable length without positioning device: 3900 mmMaximum usable length with positioning device: 3370 mmAdjustable mandrel extension travel from 8 mmOpening and closing travel of the counter-clamping jaws: 0-45 mmOpening and closing travel of the rollers or slides: 12-22-42 mmOperating manual in GermanMachine does not comply with AMVO or UVV regulationsTools not includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width:5040 mmplate thickness:2 mmtotal power requirement:12 kWweight of the machine ca.:9,4 tdimensions of the machine ca.:6200× 1300 ×1900 mmworking width:5000 mmcontrol:Fasti Matik stroke of upper beam:500 mmadjustment of lower beam:u.Biegewange 80 mmcontrol cabinet:1000 x 850 x1450 mmDocuments:vorhanden

: neu : 2025 : 090089 : prompt, Zwischenverkauf v : Türkei : 8900 €: 171.77 €: 1 : 20 to: 185 mm: 200 x 12 mm: 480 x 1060 mm: 200 mm: 80 mm: 10 mm/s: 10 mm/s: 2.2 kW: 930 mm: 1150 mm: 480 mm: 1200 mm: 530 kgProgrammable stroke and retraction pointAdjustable speed and pressureManual jog operation and automatic operating modeHolding pins and tools hardened and ground3 holder pinsBending toolManual stop 400 mmFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12950 €: 248.64 €: 0.4 - 2 mm: 300 mm: 300 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 4010 mm: 1.5 mm: 2 mm: 1.5 - 2 mm: 3 : 3 : 1000 mmFully automatic bending in two ways without the need to rotate the sheetHydraulic driveBMS MULTI-Touch with automatic depth stopPowered rotary shearAdditional rail on the bending beamMaterial support2x foot pedalSafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gr ...

: gebraucht : 1998 : 090148 : prompt, Zwischenverkauf v : Belgien : 24900 €: 1 : 3100 mm: 6 mm: 0.5 - 3.5 °: 9,5 kW: 950 mm: 4070 mm: 2330 mm: 3400 mm: 1850 mm: 5500 kgMotorized backgauge 1000 mm, ball screws, digital displayCutting gap adjustment from the front with handwheelCutting length adjusmentCutting angle adjustmentDownholer safety guardRear safety via light barrierFoot pedalTable supports with ball bearings1 side arm 1500 mm2 support armsOperating manual in German with CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width:2000 mmplate thickness:1.8 mmnumber of rolls:13 Controls:SIEMENS DECOILER:. - design : single coil :. - sheet width max:2000 mm - sheet width (min):400 mm - max. weight of coil:30 to - max. diameter of coil:2000 mm - min. internal diameter of coil:610 mmFEEDERS:. - sheet width max:2000 mm - sheet thickness max:2 mm - feeding step max.:4000 mmLEVELER UNIT:. - sheet width max:2000 mm - sheet width (min):400 mm - sheet thickness max:1.8 mm - sheet thickness (min):0.6 mm - number of leveler rolls:13 - diameter of leveler rolls:50 mm

Equipped with new control and laser protection from PILZ; including 1 set of tools with 2 V die sizes Auction-ID: A1-45793-16

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16100 €: 309.12 €: 2050 mm: 3 mm: 35 1/min: 1.5 °: 750 mm: 3 kW: 800 mm: 520 mm: 2720 mm: 1575 mm: 1230 mm: 1900 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 2 cutting edges on the lower blade800 mm squaring arm with scale2 support armsMechanical downholderManual cutting gap adjustment on the frontCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 26300 €: 502.33 €: 2050 mm: 4 mm: 4 mm: 3 mm: 3 mm: 2 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 2,2 + 1,1 kW: 3800 mm: 1150 mm: 1110 mm: 2450 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 6 mm: 6 mm: 4 mm: 5 mm: 4.5 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement o ...

: gebraucht : 2023 : 5542 : prompt, Zwischenverkauf v : Italien : 11600 €: 1 : 1300 mm: 150 mm: 150 mm: 250x350 mm: 945 mm: 0.75 kW: 1400 mm: 1000 mm: 1450 mm: 300 kgDemo machine / mint conditionNet price (price for new machine € 13.600,00)Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum.The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm.The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° an ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 230188 €: 3 kW: Wechseltisch : 16 mm: 8 mm: 8 mm: 5 mm: 8 mm: 27,9 (mit Absaugung) kW: 4100 x 2070 mm: 4100 mm: 2070 mm: 125 mm: 4064 x 2032 mm: 240 (für 3 - 12 kW) / 400 kg/m²: 3900 (für 3 - 12 kW) / 64 kg: 100 m/min: 100 m/min: 141 m/min: 14 m/s²: +/- 0,05 mm: +/- 0,05 mm: 32 sThe HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading.The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment.The system consists of the following components:Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems)Encapsulated cutting room  ...

: gebraucht : 1992 : 090174 : März 2026, Zwischenverkau : Belgien : 17800 €: 1 : 3050 mm: 6 mm: 11 - 25 1/min: 0.5 - 3 °: 18 : 750 mm: 11 kW: 3850 mm: 1750 mm: 1720 mm: 4600 kg: 770 mmSC 5 control for:- Sheet thickness input- Automatic cutting angle and gap adjustment- Cutting length limitation- Programmable backgauge lengthMotorized backgauge 750 mmDownholder protection guardFoot pedalTable supports with ball bearings1 side fence 1000 mmOperating manual in GermanMachine does not comply with German accident prevention regulations (UVV) or Austrian AMVONEW BLADESThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 70300 €: 1328.67 €: 3100 mm: 8 mm: 8 mm: 6 mm: 6 mm: 5 mm: 240 mm: 240 mm: 190 mm: 825 mm: 11 kW: 4880 mm: 1160 mm: 1200 mm: 6450 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad wa ...

equipped with Delem CNC control and Wila hydraulic top clamping; Exclusive tools Auction-ID: A1-45793-8

Stored in working condition, buyer must provide transport himself. No elevator available. Auction-ID: A3-43519-17020

max. ram stroke:220 mmtotal power requirement:1,5 kWweight of the machine ca.:880 kgdimensions of the machine ca.:1.500 x 1.000 x 2.200 mmslot-milling length:220 mmtoolhead swivelling: +/- 10° ° Gradtable::650 x 250 mmtable adjustment: vertical:360 °mmtable adjustment: quer/längs: 170/400 °mmstrokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step

max. ram stroke:220 mmtotal power requirement:1,5 kWweight of the machine ca.:880 kgdimensions of the machine ca.:1.500 x 1.000 x 2.200 mmslot-milling length:220 mmtoolhead swivelling: +/- 10° ° Gradtable::650 x 250 mmtable adjustment: vertical:360 °mmtable adjustment: quer/längs: 170/400 °mmstrokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step

material width:180 mmcoil weight:0,75 tmaterial thickness:2,0 - 6,0 mmcoil external diameter:400 - 1250 mmno. of straightening rolls:5 number of draw-in rolls:2 band speed:20 m/minpower requirement:4,0 kWweight:2,8 tdimensions (WxDxH):1,4 x 2,45 x 1,85 msnubber roll:pneumatic

material width:150 mmmaterial thickness:1,5 mmpower requirement:3,0 kWno. of straightening rolls:7 straightening roll diameter:50 mmnumber of draw-in rolls:4 weight:0,67 tDimensions (WxDxH):1,3 x 1,1 x 1,6 m

material width:150 mmmaterial thickness:2,5 mmfeed length:100 mmcompressed air:6 barclamping force of fastening pincer:2000 Nclamping force of moving pincer:2000 Nfeeding force:1200 Nweight:0,1 tDimensions (WxDxH):0,35 x 0,85 x 0,5 m

material width:850 mmmaterial thickness:0,3 - 1,5 mmno. of straightening rolls:8 straightening roll diameter:40 mmnumber of draw-in rolls:2 diameter of draw-in rolls:160 mmmaterial thickness with 600 mm material width:1,9 mmmaterial thickness with 400 mm material width:2,3 mmspeed:5 - 25 m/minmin. material width:200 mmweight:2,8 tDimensions (WxDxH):1,6 x 2,2 x 2,3 m

material width:850 mmmaterial thickness:0,3 - 1,5 mmno. of straightening rolls:8 straightening roll diameter:40 mmnumber of draw-in rolls:2 diameter of draw-in rolls:160 mmmaterial thickness with 600 mm material width:1,9 mmmaterial thickness with 400 mm material width:2,3 mmspeed:5 - 25 m/minmin. material width:200 mmweight:3,1 tDimensions (WxDxH):2,2 x 1,5 x 2,8 m

material width:300 mmmaterial thickness:- 3,0 mmno. of straightening rolls:7 Stückstraightening roll diameter:60 mmweight:0,8 tDimensions (WxDxH):0,9 x 1,5 x 1,4 m