Sheet metal blowroom machines used for sale (19)

Key data: 2 mm, 10 mm

Sheet Straightener 2,000 x 10 mm Execution.. 4high Blechdicje . 3-10 mm Straightening rollers.. 13 pcs. Straightening rollers durcm.. 145 mm Support rollers Duchm 290 mm Weight... 32,000 kg Drive mot... 30 KW

material width: 1500 mmmaterial thickness: 3,00 mmno. of straightening rolls: 23 between stands ca.: 1530 mmthickness min. approx.: 0,50 mmdiam. of the rolls ca.: 47 mmstraight. speed ca.: 0-18 m/ minbarrel length ca.: 1560 mmrun-in height: 1150 mmtotal power requirement: 23 kWweight of the machine ca.: 9,00 tdimensions of the machine ca.: 4,30 x 1,80 x 2,60 mSpecifications:- Max. vertical roll gap: 20 mm (Note: scale only goes up to 15 mm)- Lower support assembly: 5-point configuration with support rollers (individually adjustable)- Upper support assembly: 5-point configuration with support rollers- Bottom roll crowning- Circulating lubrication system for gearbox and drive shafts- Infeed table included- Reversible operation- Centralized grease lubrication for leveling roll bearings- MITSUBISHI ELECTRIC frequency converter (Type A800)- 22 kW drive motor- Drive motor features simple On/Of ...

Key data: 2500 mm, 32 mm

Manufacturer / make: WMW Schwermaschinenbau Wildau Type/ type: UBR 32 x 2500-7/16 Lagernummer / stock number: 1019 Baujahr / new in: 1969 max. sheet width: 2500 mm Bale length / convexity length of rollers: 2700 mm Max. sheet thickness ( St 50): 32 mm Max. sheet thickness ( St 34): 39 mm min. sheet thickness ( St 50): 8 mm Number of straightening rollers:7 rollen / rollers Number driven straightening rollers: 5 rollers Straightening roller diameter of straightening rollers: 290 mm Output straightening rollers / diameter of input / output straightening rollers: 345 mm Number of support rollers: 13 Stützrollendurchmesser / diameter of support rollers: 288 mm Oberbolenhub/ stroke of upper beam: 120 mm Straightening speed / speed of straightening: 16 m / min Hauptantrieb / rated power of main drive: 90 kW Total load: 138 kW Gewicht de ...

plate width: 1650 mmplate thickness: 4 mmstraightening roll diameter: 45 mmsupport rollers: 140 Stk: 17 Stk: Sheet width: 1,650 mmSheet thickness: 4 mmLeveling roller diameter: 45 mmNumber of backup rollers: 140Number of leveling rollers: 17The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

plate width: 2000 mmsheet thickness - max.: 10 mmsheet thickness - min.: 3 mmnumber of straightening: 13 Rollersstraightening roll diameter: 145 mmstraightening feed: 16 m/minbale length: 2330 mmdistance b/n rollers centers: 150 mmdiameter of bottom rollers: 290 mmmain drive motor: 30 kWweight: 32 tSheet width: 2,000 mmMax. sheet thickness: 10 mmMin. sheet thickness: 3 mmNumber of leveling rollers: 13Leveling roller diameter: 145 mmLeveling speed: 16 m/minRoller face length: 2,330 mmCenter distance between leveling rollers: 150 mmBackup roller diameter: 290 mmMain drive motor: 30 kWMachine weight: 32 tAdditional InformationNumber of backup rollers: 21 / 24Number of support rows (upper / lower): 3 / 3Traverse lifting speed: 0.71 mm/sTraverse adjustment range: –18 mm to +42 mmMax. lower traverse tilt: 8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech  ...

Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request

plate width: 2500 mmsheet thickness - max.: 32 mmsheet thickness - max.: 39 mmsheet thickness - min.: 8 mmbale length: 2700 mmnumber of straightening: 7 Rollersnumber driven straightening rollers: 5 Stkstraightening roll diameter: 290 mmdiameter of input / output straightening rollers: 345 mmnumber of support rollers: 13 Stkdiameter of support rollers: 288 mmstroke of upper beam: 120 mmstraightening feed: 16 m/minrated power of main drive: 90 kW: 138 kwweight: 79 tSheet width: 2,500 mmMax. sheet thickness (St 50): 32 mmMax. sheet thickness (St 34): 39 mmMin. sheet thickness (St 50): 8 mmRoller face length: 2,700 mmNumber of leveling rollers: 7Number of driven leveling rollers: 5Leveling roller diameter: 290 mmOutlet leveling roller diameter: 345 mmNumber of backup rollers: 13Backup roller diameter: 288 mmUpper beam stroke: 120 mmLeveling speed: 16 m/minMain drive: 90 kWTotal connected lo ...

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets wi ...

material width: 250 mmmaterial thickness: 2 mmdiameter: 1200 mmtotal power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

material width: 100 mmmaterial thickness: 15 mmno. of straightening rolls: 9 straightening feed: 7 m/mintotal power requirement: 0,75 kWweight of the machine ca.: 380 kgdimensions of the machine ca.: 710 x 920 x 1360 mmFeatures:- 5x driven lower rollers- 4x adjustable upper rollers- Max. cross-section approx. 800 mm²- Mobile use on casters- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: / mmplate thickness: / mm: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1650 mmmaterial thickness: 3,00 mmno. of straightening rolls: 21 Control: sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 50 mmbetween stands ca.: 1720 mmrun-in height: 1250 mmtotal power requirement: 45 kWweight of the machine ca.: 24,50 tdimensions of the machine ca.: m6-HIGH LEVELER / Strip Leveler / with Quick-Change System- 18 Back-up Supports- Digital Roll Adjustment (0.01 mm resolution)- Gearbox renewed in 2021- Quick-Change SystemThe quick-change system is mounted on a sliding plate. This sliding plate—on which the leveling rolls as well as the entire back-up support assembly are mounted—can be extended, allowing for quick and easy roll replacement in an easily accessible position.The extension and retraction of the sliding plate are hydraulically actuated. Connection to the drive mechanism is automatic.- Intermediate RollsThe intermediate rolls preve ...

material width: 0300 mmmaterial thickness: 2,50 mmno. of straightening rolls: 11 feed rolls: 2 exit pinch rolls: 2 diam. of the rolls ca.: 60 mmstraightening speed: 5 - 30 mm/minsheet thickness - min.: 0,40 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFeatures:• All upper rollers manually adjustable• All lower rollers interconnected via gears• Speed manually adjustable via handwheel• Strip guide at the infeed• Roller basket at the outfeed• Sensor arm for loop controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 0200 mmmaterial thickness: 3,00 mmno. of straightening rolls: 21 sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 30 mmspeed: 56 m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHydraulic driveAll rollers drivenSide belt guide with handwheelPSS300 controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0400 mmcoil outside dia.: 1400 mmweight max. in kg: 3000 kgplate thickness: 0,80 - 4,50 mmnomb. of straightening rolls: 7 diam. of the rolls ca.: 80 mmfeed rolls: 2 exit pinch rolls: 2 coil width: 600 mmrange of expansion ca.: 470 - 530 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDecoiler DIMECO type 2371 E-FPSYear of construction 2006with hydraulic spreadingwith pneumatic pressure roller from abovewith 6 pieces of band limiting armsStraightening machine DIMECO type 1676 C-VVYear of construction 2000with frequency-controlled drivewith hydraulic band insertion aid with support table, insertion tongue,Pressing arm from abovewith pneumatically ventilated rollerwith side belt guide rollerswith pneumatically adjustable belt transfer tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0400 mmcoil outside dia.: 460 - 530 mmweight max. in kg: 2 x 2000 kgplate thickness: 0,40 - 3,00 mmcoil outside - diam. ca.: 1500 mmnomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mmspeed: 0-40 m/mintotal power requirement: 15 kWweight of the machine ca.: 5,20 tdimensions of the machine ca.: m- straightening machine type KRE 30.400/9with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device- double decoiler type 2000.2 Hwith pneumatic lag brake, hydraulic expansion, hydraulic snubber roll- coil loop control via ultrasoundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0500 mmcoil outside dia.: 1400 mmweight max. in kg: 4000 kgplate thickness: 0,80 - 3,60 mmdiam. of the rolls ca.: 80 mmfeed rolls: 2 nomb. of straightening rolls: 7 exit pinch rolls: 2 speed: 5-30 m/minrange of expansion ca.: 445 - 530 mmexpansion: manuell total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mControl conversion to SIEMENS S7 in 2012- pneumatic pressure roller on the side- pneumatically ventilated feed roller- Straightening rollers manually adjustable- lateral belt guide at the inlet- Large roller basket at the outlet- Ultrasonic transmitter for loop control- Roller feed type 1125 D- Bandwidth max. 510 mm- Band thickness max. 6 mm with full width 5.50 mm- Roll diameter 125mm- Feed speed: max. 100 m/min.- pneumatically ventilated top roller- Lateral tape guide with digital display- Inlet roller basketThe data for this ad was ...