sheet metal working used for sale (3,303)

material width:600 mmmaterial thickness: - 4,0 mmno. of straightening rolls:21 straightening roll diameter:30 mmmaterial cross-cut:1800 mm²speed:6 - 36 m/minPower capacity:4,5 kWWeight:2,0 tDimensions (WxDxH):1,5 x 2,0 x 1,9 m

material width:70 mmmaterial thickness:0 - 1,5 mmfeed length:100 mmmaterial cross-cut:60 mm²feeding force:400 Nclamping force of feeding pincer:1300 Nair pressure - required:3 - 6 barWeight:0,01 tDimensions (WxDxH):0,4 x 0,4 x 0,7 m

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1200 mm Weight: 310 kg Auction-ID: A7-50799-110

Handle material: Chromed steel Bending head material: Aluminum For copper and aluminum tubes: This pipe bender is suitable for both copper and aluminum tubes, making it versatile. Precise bending up to 180 degrees: Thanks to the degree distribution, you can perform any bend to the degree. For pipes with a diameter of 8-10-12 mm: Suitable for different pipe diameters, so you only need one tool for multiple jobs. Rubber handle: For extra comfort while working, even after a long working day. Length: 340 mm Width: about 48 mm Auction-ID: A1-40900-60

Finn-Power A5-25 FB Punching Machine Type: Punching machine Manufacturer: Finn-Power Model: A5-25 FB Year of manufacture: 1999 Punching capacity: 23 t Max. sheet thickness: 4 mm Approx. machine weight: 12,000 kg Approx total dimensions (L x W x H): 6000 x 6000 x 2000 mm X/Y-axis feed rates: 2500/1250 mm JETCAM software Tools: Included Brush table Max. hydraulic pressure: 300 bar Power supply: 3 x 400 V, 50 Hz Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-6

Up to 42mm, with various accessories, both left and right turning, with supply and discharge table, digital readout Auction-ID: A1-50660-646

- Strength 4100 kg. - Pedal actuation. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-604

Auction-ID: A1-50660-628

Equipped with a feed table and 3 metal bins Auction-ID: A1-50660-630

Equipped with supply line length approx. 12 meters As well as canopy Auction-ID: A1-50660-800

Up to 55mm, with various accessories Auction-ID: A1-50660-647

- Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-602

I - beam section - flat steel: 100 x 15 (d 400) mmI-beam section - upend: 60 x 10 (d 500) mmL-beam: 50x50x6,0 (d 600) mmround material: 35.0 (d 500) mmbar material dia. max.: 70 x 1.5 (d 1500) mmsquare material: 50x50x3.0 (d 1400) mmbending speed: 8.5 U/minroll diam. toproll: 152 / 162 mmbore: 40.0 mmStroke length: 120 mmvoltage: 400 Vtotal power requirement: 1.1 kWweight: 470 kgrange L-W-H: 900 x 600 x 1100 mm Original price with accessories: approx. 10.000 eurosFeatures:- Two driven rollers (lower rollers)- Manual feed of the upper roller- Horizontal and vertical working positions- Shafts mounted with tapered roller bearings- Lateral, manually adjustable stop rollers- 1 set of standard rollersâsplit - 1 sets of tube rollers- 1 freely movable control unit- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 120 x 20 (d 750) mmI-beam section - upend: 60 x 10 (d800) mmL-beam: 50 x 5 (d 1200) mmbar material - diameter: 35.0 (d 800) mmbar material dia. max.: 70 x 3.0 (1200) mm: 50.0 mmdiameter of upper rolls: 155 mmdiameter of lower rolls: 155 mmStroke length: 150 mmRotating speeds: 9.0 U/mintotal power requirement: 1.3 kWweight: 305 kgrange L-W-H: 900 x 700 x 1500 mmFeatures:- Robust electric-motor-driven ring/profile bending machine- Machine base frame with rear storage shelf- Can be used in both horizontal and vertical orientations- Equipped with a wide variety of roller sets Split roller segments Pipe rollers - Electro-hydraulic feed of the upper roller- Manually adjustable side/alignment rollers- 1 freely movable control panel - Base frame with forklift pockets For easy transportThe data for this ad was created with ModulMWS - the software solution of LogoT ...

I - beam section - flat steel: 120 x 20 (d 750) mmI-beam section - upend: 60 x 10 (d800) mmL-beam: 50 x 5 (d 1200) mmbar material - diameter: 35.0 (d 800) mmbar material dia. max.: 70 x 3.0 (1200) mm: 50.0 mmdiameter of upper rolls: 155 mmdiameter of lower rolls: 155 mmStroke length: 150 mmRotating speeds: 9.0 U/mintotal power requirement: 1.3 kWweight: 305 kgrange L-W-H: 900 x 700 x 1500 mmFeatures:- Robust electric-motor-driven ring/profile bending machine- Machine base frame with rear storage shelf- Capable of horizontal and vertical operation- Equipped with a wide variety of roller sets Split roller segments Pipe rollers- Manual feed of the upper roller- Analog position indicator for the upper rollers (scale)- Manually adjustable side/aligning rollers- Base frame with forklift pockets For easy transportThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

: neu : 2025 : 090080 : prompt, Zwischenverkauf v : Türkei : 32100 €: 613.11 €: 1 : 3100 mm: 4 mm: 42 1/min: 1,5 °: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsball in the tabletape measuretilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6500 mmplate thickness: 3 mmback stop - adjustable: 1000 mmdimensions: 7300x2400x2300 mmWeight: 20000 kgEquipment/accessories:- 1 x set of knivesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

puncher: 55 tround bar steel: 40 mmsquare edge steel: 40 mmL-beam: 120 x 120 x 10 mmhole punching press: capacity (dia. x thick.): Ø 40 x 10 mmshear: flat material: 300 x 15 mmthroat: 250 mmwork stroke: 60 mmwork height max.: 1085 mmtotal power requirement: 4,0 kWweight: 1300 kgrange L-W-H: 2000 x 900 x 1800 mmEquipment:- Electro-hydraulic structural steel shears with 4 workstations Flat steel shears Structural steel shears Punch press Notching station- Driven by two hydraulic cylinders- Infinitely variable stroke adjustment- Support table at the hole-punching The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 6.0 mmcutting angle adjustment: 0.5 - 3.0 °down holder: 12 Stückno. of strokes: 8 - 14 Hub/minback stop - adjustable: 750 mmwork height max.: 770 mmControl: konv. total power requirement: 7.5 kWweight of the machine ca.: 3800 kg.range L-W-H: 2650 x 2100 x 1750 mm From a maintenance workshop Very good condition () Features- Robust, slide-guided electro-hydraulic panel shear- HACO control panelâfront left Easy operation directly at the cutting table Adjustment of cutting angle and backgauge Emergency stop button, latching - Electromotor-driven material stop/backgauge Fine adjustment with handwheel (front left)- Electro-hydraulic cutting angle adjustment- Manual cutting gap adjustment, from the front Eccentric adjustment - 1x long side stop - Front finger guard- 1x freely movable foot switch- Rear sheet metal chute- Operating instructionsThe data f ...

sheet width: 1550 mmplate thickness: 6.5 mmpre-bending: 4.5 mmdiameter of upper rolls: 150 mmside roll diameter: 130 mmdiameter of lower rolls: 150 mmdistance: max. OW zu UW 20.0 mmvoltage: 400 Vtotal power requirement: 1.1 + 2.2 kWweight of the machine ca.: 2370 kgrange L-W-H: 3300 x 1150 x 1110 mm Rarely used, according to the previous owner Current new price approx. 25.000 euros Special price upon request (!)Features:- Electro-hydraulic 4-roll plate bending machine Equipped with a driven top roll and bottom roll Sturdy welded construction- Application range: Light to heavy-duty sheet metal processing (steel/aluminum/stainless steel)- Electro-hydraulic adjustment of the bottom and side rolls- Linear guidance for the side rolls- Top roll driven by a robust electric motor and planetary gearbox- Mobile, separate control console- Hardened, crowned rolls (SAE 1050 / CK 45 steel)- Conical be ...

: neu : 090253 : November 2026, Zwischenve : Türkei : 21600 €: 414.72 €: 2550 mm: 2.5 mm: 35 1/min: 750 mm: 3 kW: 2 Stk.: 850 mm: 400 mm: 2860 mm: 1350 mm: 1200 mm: 1500 kgMotorized back gauge 750 mmPneumatic sheet supportHolddown with rubberMoveable foot switchSquaring arm2 supporting armsPhotocell-protection on the back sideUser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schechtl Impact Shears / Guillotine Shears • Manufacturer: Schechtl • Type: SJS 5 • Year of construction: 1967 • Factory number: 2120 • Manual impact shears / guillotine shears • Manually operated version • Robust steel construction • Manual material positioning • Adjustable stop • Handwheel for adjustment • Large material run • Mechanical operation without electric drive • Space-saving, free-standing design • Used machine • Signs of wear and corrosion due to age and use • Condition according to pictures Auction-ID: A1-50373-2272

Schechtl HBM 310 Manual Swivel Bending Machine with Roller Shears • Manufacturer: Schechtl • Model: HBM 310 • Year of construction: 2017 • Serial number: HB27520 • Manual folding machine • Working length: 3,140 mm • Working capacity steel (400 N/mm²): 1.00 mm • Working capacity aluminium (250 N/mm²): 1.50 mm • Working capacity stainless steel / stainless steel (600 N/mm²): 0.80 mm • Working capacity copper (300 N/mm²): 1.25 mm • Working capacity zinc (150 N/mm²): 2.50 mm • Upper beam stroke: 100 mm • Sloping upper beam • Foot-operated clamping of the upper beam • Includes hand roller scissors • Roller shears with guide rail • Cutting capacity roller shears: up to 0.8 mm • Manual operation • Weight: approx. 1,370 kg • Instruction manual available • Used machine • Made in Germany Auction-ID: A1-50373-2271

Table height 900 mm Max material thickness ST37 6mm stainless steel 4 mm Max capacity 40 strokes/min. Max capacity 90 degrees 225 x 225 mm Auction-ID: A1-47366-174

Pointed knife above, new multi V69° below. Auction-ID: A1-47366-49

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1200 mm Weight: 310 kg Auction-ID: A7-50796-110

maximum thickness round steel 55mm; 50mm square steel ; flat steel 20mm; PLEASE NOTE: The buyer is responsible for moving out the lot. There is a forklift available! Auction-ID: A1-47366-81

height and depth adjustable; stroke adjustable; 750mm expulsion; maximum capacity 3mm steel; 4mm stainless steel; Equipped with: adjustment tool; retainer; PLEASE NOTE: The buyer is responsible for moving out the lot. There is a forklift available! Auction-ID: A1-47366-80

 The FARROS BSA600 – KS1200 is a high-quality Swiss-engineered column and boom grinding system, specially developed for grinding, weld preparation, back gouging and surface finishing of large and heavy steel components.FARROS is a well-established Swiss manufacturer with decades of experience in industrial grinding technology. FARROS machines are internationally recognised for their robust construction, precision, reliability and long service life, even under demanding industrial production conditions.The BSA600 – KS1200 is particularly suitable for manufacturers of pressure vessels, boilers, large-diameter pipes, wind turbine towers, offshore structures, storage tanks and heavy welded steel constructions.The KS1200 grinding head is designed for demanding applications such as longitudinal and circumferential weld grinding, removal of weld reinforcement, back gouging, weld seam prepa ...

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-38