sheet metal working used for sale (3,279)

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 8 mm: 8 mm: 4.9 mm: 6 mm: 6 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement o ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21900 €: 420.48 €: 80 to: 285 mm: 300x25 mm: 750x1425 mm: 300 mm: 105 mm: 10 mm/s: 10 mm/s: 10 kW: 930 mm: 1430 mm: 750 mm: 1450 mm: 1700 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 12900 €: 247.68 €: 40 to: 285 mm: 200x24 mm: 660x1250 mm: 250 mm: 80 mm: 10 mm/s: 10 mm/s: 4 kW: 930 mm: 1250 mm: 650 mm: 1250 mm: 1100 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9739 : prompt, Zwischenverkauf v : Türkei : 22300 €: 428.16 €: 1 : 1 : 2030 mm: 6 mm: 6 mm: 5 mm: 170 mm: 4 kW: 3600 mm: 1020 mm: 1120 mm: 2400 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 57900 €: 1094.31 €: 1 : 650 mm: 0,5 - 170 mm: 670 x 2200 mm: 4000 m³/h: 120 mm: 6 bar: 78 (+/-2) dB: 22 kW: 2600 mm: 1350 mm: 2100 mm: 1125 kgWITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOPMachine made of stress-free welded steel construction for stable and rigid structure.Work table with motorised height adjustment via 4 synchronised spindles.Independent drive motors for each work group.Hoods for extraction inside the machine, one per station.Touch screen for-Automatic star-delta connection of the main motors- Analogue ammeter for each group- Digital display for sheet thickness with decimal point tolerance- Material thickness adjustment (+/- 0.1 mm)- Machine condition monitoring with alarm messagesFEEDING SYSTEMRobust steel structure, wear-resistant surface.Vacuum conveyor belt on requestVariable feed speed via freq ...

Power: 9 kWWorking parameters: 110 t – Gooseneck 500 mm – Adjustable stroke 0 to 60 mm – Cadence 37 rpm (stroke 20 mm)Steel capacity 45 kg/mm²: Ø 40 × 14 mm – Ø 28 × 16 mmEquipment included: 20 sets of punches and dies Ø 8 to 27 mm – Semi-paxy stop capacity 1000 – Fagor numerical control Powersupply: Pump 28 l/min – 230 barYear & Manufacturer: 2007 – GEKADimensions (mm): 1300 × 1300 × 1850Weight (kg): 1715Remarks: Serial No. 10138 1955 included in the description. Auction-ID: A1-47421-16

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 5020 mm: 1.5 mm: 2 mm: 1.5 mm: 6 : 6 : 1130 mm: 180 mm: 915 mm: 4 kW: 6200 mm: 1435 mm: 1980 mm: 3200 kg: 145 °hydraulic drivestandard controladditional rail on the bending beam2x foot pedalremoveable material supportsafety equipment accoring to the control rules BG GermanyOPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany.Transport and commissioningat customers place on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With extra pins Auction-ID: A3-43544-2279

- 3 rollers. - Roller length 1050 mm. - Roller diameter 65 mm. - Maximum length of the sheet to be bent approx. 1000 mm. - Maximum thickness of the sheet to be bent: 1.25 mm. - Minimum diameter to bend 85 mm. - New, unused machine. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-33

Sold with contents. Auction-ID: A1-47254-25

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5104 €: 98.51 €: 3/4 26,9 mm, 1 33,7 mm, mm: 5 mm: 3 mm: 87 kgThe motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",).Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution!The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55900 €: 1056.51 €: 3100 mm: 9 mm: 8 mm: 7 mm: 7 mm: 5 mm: 245 mm: 245 mm: 180 mm: 1,5 / 6 m/min: 7.5 kW: 5350 mm: 1600 mm: 1470 mm: 6850 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recomm ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 103100 €: 1948.59 €: 2550 mm: 25 mm: 25 mm: 20 mm: 20 mm: 16 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 5500 mm: 2000 mm: 1900 mm: 13000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created wit ...

: gebraucht : WA0054 : 292 €: 1 : 835 mm: 80 mm: 16 mmMint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20000 €: 384 €: 1270 mm: 5 mm: 5 mm: 4 mm: 5 mm: 4 mm: 4 mm: 3 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 3020 mm: 1150 mm: 1110 mm: 2150 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Spanien : 72800 €: 1375.92 €: 165 to: 610 mm: 5 : 40/30 bzw. 34/34 mm: 110 mm: 31 1/min: 750x20 / 400x30 mm: 205x205x18 mm: 60 mm: 16x58x110 mm: 15 kW: 2950 mm: 1600 mm: 2200 mm: 6300 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformation by diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmfast hydraulic, centring deviceoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISH(sample photos) OPTION ",KIT", € 970,--length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Further available models ...

Serial number: 24550616Punching force: 200 kNConnection: 11 kVATable dimensions: 2450 x 1200 mmincluding accessories such as various punches and punching toolsReference: CES - Lot 107 Auction-ID: A7-46763-333

Automatic stirrup bending machine, 4 payoffs, double bending 8-12mm, single bending 8-16 mm, working hours 1322, very good condition Auction-ID: A7-47311-2

: WA0136 : 3150 €: 1 : 8 mm: 3 x 1.000 & 1 x 1.050 mmcomplete 30°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic stirrup bending machine, 1 payoff, double bending 8-12mm, single bending 8-14 mm Auction-ID: A7-47311-5

: neu : ca. 10 Wochen ab Auftrags : Türkei : 29000 €: 553.9 €: 2050 mm: 4 mm: 42 1/min: 750 mm: 7.5 kW: 800 mm: 450 mm: 2700 mm: 2300 mm: 1350 mm: 2800 kgmotorizedback gauge atrecirculating ballscrew with Control DT5hold down with rubber padsSide Lay with T-Slot2 Sheet support armsball in the tabletape measuretilting stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2001 : 9647 : prompt, Zwischenverkauf v : Italien : 24400 €: 1 : 30 to: 1250+N x 1000 mm: 1250 mm: 1000 mm: 40 m/Min: 30 m/Min: 50 m/Min: 30 mm: 730 1/Min: 300 1/Min: 980 mm: 4 kW: 115 l: 4000 mm: 2780 mm: 1900 mm: 4000 x 2300 x 1900 mm + Z mm: 4800 kgWith 6-way multitool holder MTE6 (max. Dm. 24 mm)2 Clamping clawsTable with Brushes, table dimension 1970 x 2260 mmFoot pedal2 pcs. additional single matrix holdersPC with Euromac Software Eurowin 8.36Max. Punching force 300 kNAutomatic repositioning up to 10.000 mmMax. Punching diameter for single tool 88,9 mm,Max. Punching diameter Multitool Holder MTE6 Dm. 24 mmMax. Opening the clamping claws 7 mmTransport width: 2350 mmUser Manual in english and italianCE declaration availableWITH LARGE TOOL PACKAGEseveral pieces of each of the following dimensions:Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9 ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42600 €: 813.66 €: 2035 mm: 4.5 mm: Hydraulisch : 135 °: 3300 mm: 1550 mm: 1900 mm: 3200 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 1.25 mm: 2 mm: 1.5 - 2 mm: 4 : 4 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic g ...

Batch that is part of a combination of batches Auction-ID: A1-47254-41

plate thickness: 1,25 mmworking length: 8100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: / mmcoil weight: / tcoil internal dia.: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6200 mmplate thickness: 8 mmthroat: 60 mmdistance between columns: 6400 mmcutting angle adjustment: 0,5 bis 2 °total power requirement: 13 kWweight of the machine ca.: 19 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic straigntening, bending and cutting machine up to 16 mm, 5 payoffs, 5 hyperbolic rotors, max cutting length 1200 cm Auction-ID: A7-47311-8