sheet metal working used for sale (3,319)

: neu : 2025 : 090131 : prompt, Zwischenverkauf v : Türkei : 4700 €: 109.71 €: 1 : 50 mm: 155 mm: 2 : 1.5 kW: 4,5 m/min: 60x10 mm / 500 mm, 40x10 : 100x15 mm / 450 mm, 60 x : 35x35 mm / 900 mm, 20x20 : Ø 35 mm / 600 mm, Ø 30 mm : Ø 70x2 mm / 1.000 mm, Ø 3 : 70x30x2 mm / 1.200 mm, 50 : 50x50x3 mm / 1.700 mm, 40 : 50x50x5 mm / 800 mm, 40x4 : 50x50x6 mm / 1.000 mm, 30 : 1050 mm: 750 mm: 1450 mm: 390 kg2 mech. driven rollsstrong cast steel constructionshafts made of special steel,hardened and groundtop roll manual adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 97400 €: 1840.86 €: 2050 mm: 30 mm: 30 mm: 25 mm: 25 mm: 20 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 5000 mm: 2000 mm: 1900 mm: 11000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created with ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 7 mm: 7 mm: 4 mm: 5 mm: 5 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement of  ...

: gebraucht : 070007 : prompt, Zwischenverkauf v : Deutschland : 1200 €: 1 : 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mmwith brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 070008 : prompt, Zwischenverkauf v : Deutschland : 1200 €: 1 : 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mmwith brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 174688 €: 3301.6 €: 3 kW: Manueller Tisch : 16 mm: 8 mm: 8 mm: 5 mm: 8 mm: 3060 x 1530 mm: 3060 mm: 1530 mm: 140 mm: 3048 x 1524 mm: 160 kg/m²: 90 m/min: 90 m/min: 127 m/min: 14 m/s²: +/- 0,05 mm: +/- 0,05 mmThe HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible.The manually extendable table is moved out of the side of the machine for loading and unloading.The cutting head has automatic focus adjustment.This makes the system a particularly economical, fast and very easy to operate production machine.The system consists of the following components:Manual loading and unloading tableEncapsulated cutting room with protective glazingCNC graphic control with touchscreenLaser source Brilase Premium DRM-8 F150Cutting head with automatic focu ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12150 €: 233.28 €: 0.4 - 2 mm: 100 mm: 200 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2018 : 070033 : prompt, Zwischenverkauf v : Türkei : 20310 €: 389.95 €: 1 : 0.6 - 4 mm: 300 mm: 900 mm²: 80 mm: 10 Nm: 2.62 kW: 1000 mm: 800 mm: 1400 mm: 330 kgDEMO MACHINEhelical gear box Wattdrivepneumatic equipment Festocontrol SCHNEIDER with touchscreen2 driven rollsremote service modulehand wheel Euchneroperating manual in German with EC conformity declarationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 32480 €: 620.37 €: 1550 mm: 9 mm: 9 mm: 7 mm: 7 mm: 5 mm: 180 mm: 180 mm: 150 mm: 1,5 / 6 m/min: 5.5 kW: 3900 mm: 1150 mm: 1250 mm: 3250 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT (PRICES ON REQUEST):infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10900 €: 209.28 €: 1250 kg: 1300 mm: 450 - 550 mm: 400 mm: 80 mmmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlWITH PNEUMATIC DOWNHOLERThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2004 : 9726 : prompt, Zwischenverkauf v : Türkei : 6750 €: 1 : 1350 mm: 3 mm: 35 1/min: 1.5 °: 550 mm: 3 kW: 2 Stk.: 850 mm: 400 mm: 1700 mm: 1350 mm: 1200 mm: 950 kgmanualback gaugeautomatic sheet hold downhold down with rubber padsmoveable foot switchside support arm2 supporting armsuser manual in GERMANdoes not complie with the German UVV and Austrian AMVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2002 : 090129 : prompt, Zwischenverkauf v : Türkei : 27800 €: 1 : 3100 mm: 10 mm: 350 mm: 10 1/min: 1.5 °: 1000 mm: 22 kW: 3800 mm: 3600 mm: 2000 mm: 9800 kgSwing cut constructionNC-preselection system ENC100 for back gauge, cutting length and piece counterMotorized back gauge 1000 mm on ball screws, folding upwardsHydraulic hold down pistonsFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotOilfillingLight barrier on the back of the machineUser manual in GERMAN with EC declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 31080 €: 593.63 €: 0.4 - 3 mm: 400 mm: 1200 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 1100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 6,0 mmdistance between columns: 3060 mm: max. 730 mmcutting angle adjustment: ja °cutting gap adjustment: ja mmconnected load: 11,0 kWweight of the machine ca.: 5,1 tdimensions of the machine ca.: 4,0 x 260 x 2,55 mHydraulic guillotine shear with- ELGO control for backgauge- Cutting gap adjustment- Cutting length adjustment- Cutting line illumination- Side gauge- 2 support bracketsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mmplate thickness: 4,0 mmdistance between columns: 2100 mmroll diameter: 150 mmtotal power requirement: 7,0 KWweight of the machine ca.: 2,2 tdimensions of the machine ca.: 2,95 x 1,0 x 1,75 mmSheet metal bending machine with 3 rollers- 2 driven rollers- Rear roller electrically adjustable- Conical bending- Foot switch- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mmblade length: 200 mmangle adjustable from - to: fest 90 Gradtable surface area: 750 x 500 mmpressure: ttotal power requirement: 3,0 kWweight of the machine ca.: 0,62 tdimensions: 1,2 x 0,8 x 1,2 mCombination machine: edging and notching- foot switch- Emergency stop switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 16 mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2550 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 205 mmside roll diameter: ~ 195 mmControl: konv. oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 7.5 kWweight: 4500 kgrange L-W-H: 5000 x 1500 x 1300 mmFeatures:- Robust electro-hydraulic 3-roll bending machine- 3-roll concept offers a wide range of bending and rounding options- Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks- Diameters of up to 1.1 times the top roll diameter are possible- Forged and hardened rolls with a hardness of 53-55 HRC- Low-maintenance, stable machine design- Sturdy welded steel construction- Electro-hydraulic folding bearing for easy pipe removal- Pressure gauge / pressure indicator for the rolls- Safety device (safety lanyard with switch unit)- Operating instruc ...

material width:500 mmcoil weight:2 x 2,0 tmaterial thickness:1,0 - 6,0 mmcoil internal diameter:350 - 420 mmcoil external diameter:1600 mmno. of straightening rolls:9 straightening roll diameter:50 mmnumber of draw-in rolls:2 speed:0 - 40 m/minmaterial thickness at 500 mm material width:3,5 mmpower requirement:17,5 kWDimensions (WxDxH):2,3 x 4,2 x 2,4 mstraightening machine:RM 5050.4/9 double decoiler:AH 2000/2/M snubber roll:pneumatic interchangeable jaws:130 mm expansion of the inner diameter

Stored in working condition, buyer must provide transport himself. Elevator available to charge it. Auction-ID: A3-43519-17021

weight max.: 1200 kgtable turning speeds: 80 - 1600 mm/min.roll diameter: 200 x 50 mmworkpiece diameter: 20 - 800 mmrange L-W-H: 520 x 470 x 390 mm Antriebrange L-W-H: dito mm Mitläufervoltage: 230 V / 50 Hzweight: 56.0 kg current new price approx. 3,000 euros special price on requestProduct description:- For processing cylindrical workpieces- Flat frame- Swivel castors with polyurethane coating- Clearly arranged operating elements- Infinitely variable speed- The control electronics are protected by a robust and. enclosed housing- With foot switch for start/stop- Drive with DC electric motors and gearboxThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mmplate thickness: 1,5 mm: 135 °: 100 mmtotal power requirement: 1 kWweight of the machine ca.: 965 kgdimensions of the machine ca.: 2680 x 640 x 1100 mmNEW PRICE: 9,990 EURODescription:- Foot operation enables positioning of the sheet metal with both hands- Workpiece clamping and bending process are motorized via a chain drive- Manual adjustment of the bending angle, reading of the angle on a scale ring- Many bending options with segmented upper beam- Precise movement of the bending beam via large flat guides- Heavy, robust welded constructionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width:400 mmplate length:500 mmplate thickness:4 mmtotal power requirement:0,5 kWPunching and Nibling machine with 6 x 3 mm nibling and 4 mm for cuting

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13760 €: 264.19 €: 0.4 - 2 mm: 400 mm: 300 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:300 mmcoil weight:0,5 tcoil internal diameter:420 - 520 mmcoil external diameter:1400 mmweight:0,6 tdimensions (WxDxH):0,8 x 1,2 x 1,7 mexpansion:pneumatic

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 1.5 mm: 2 mm: 1.5 - 2 mm: 5 : 5 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gr ...

material width:250 mmmaterial thickness:0,25 - 3,0 mmno. of straightening rolls:11 straightening roll diameter:30 mmspeed:6 - 60 m/minpower requirement:15,0 kWweight:1,1 tdimensions (WxDxH):1,1 x 1,7 x 1,5 mstriaghtening pressure automatic:hydraulic coil loof control:ultrasonic

: neu : ca. 10 Wochen ab Auftrags : Türkei : 59600 €: 1126.44 €: 3100 mm: 10 mm: 6 mm: 50 mm: 13 1/min: 1.5 °: 16 : 22 to: 1000 mm: 200 mm/s: 22 kW: 200 l: 2 Stk.: 865 mm: 580 mm: 3515 mm: 4200 mm: 2250 mm: 3600 mm: 2100 mm: 9300 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade f ...

material width coil line:600 mmcoil weight:2 x 3,5 tcoil internal diameter:460 - 530 mmcoil external diameter:1500 mmmaterial thickness coil line:0,5 - 3,0 mmno. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mmfeed length:0 - 500 mmpower requirement:10,0 kWweight:10,0 tdimensions of the coil line:8,8 x 4,0 x 2,55 mstraightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed