Tube Bending Machines used for sale (55)

RASI S80.6L - Tube bending machine Curve and mandrel bending of tubes and round profiles Coils of pipes incl. tools and documents Year of construction 2006 Technical data - Tube Ø x wall thickness: 82 x 2.6 mm - Max. resistance torque: 12.7 cm³ - Min. tube Ø: 4 mm - Outer bending radius: 228 mm - Inner bending radius: 34 mm - Min. bending radius: 1.5 x D - Max. bending angle (accuracy ± 0.1°): 195° - Bending speed return (programmable): 0 - 9.3 rpm - Bending speed advance (programmable): 0 - 6.6 rpm - Counter holder rail: rigid / running - Tooling: 1-, 2- or 3-groove - Bending direction: right - Feed speed (infinitely variable): 0 - 60 m/min - Push-back force of the feed: infinitely adjustable during bending - Twisting speed (infinitely variable): 0 - 60 rpm - Max. twist angle (± 0.1°): unlimited - Max. pipe clamping force: 8 t - Diameter bridging of a  ...

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17031

Bending capacity: 3/8"-2" Bending angle: 180° Angle turret: 6-fold Mounted bending tool: Ø 28 mm Country of origin: Netherlands Motor power: 3 kW Machine weight: 250 kg Machine LxWxH: 1,000 x 800 x 950 mm

Hydraulic press for crimping hydraulic hoses, equipped with all the necessary dies for 0 hoses. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-45834-60

Mandrel tube bending machine Fabr. LONG Type EL 45 Specifications: for pipe diameters 45 x 2 mm Mandrel holder length 2,000 mm Bending speed for 90° approx. 3 s electr. Connection 380 V, 2.2 kW Weight approx. 1000 kg with tools: 16 x R 76 22 x R 76 28 x R 75 35 x R 105

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-45834-35

Offer 23250 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Pipe circular saw - Inside and outside tube end burr device - Pipe collaring device - Without tools

Hydraulic press for crimping hydraulic hoses, equipped with all the necessary dies for 0 hoses. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-45833-60

Offer 25059 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Bending tools , Ø 1/2" R 67 mm, Ø 1" R 67 mm ,

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-45833-35

Rothenberger Robull Type L Hydraulic Pipe Bending Machine Larger, Sturdier Version Think it's type L. The number on the nameplate begins with L. The version that you can still buy at the moment is smaller and the bending glasses at the front are not so stable. Good used condition, full function, without the tripod foot. This is available to buy at Rothenberg, or simply build it yourself. Total weight 68 kg. Further dimensions can be found in the pictures. Shipping is done on several packages due to the weight

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45834-26

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

Hydraulic power unit comes from a Waldrich long planing machine Weight 400Kg LxWxH 1200 x 800 x 1200mm Condition: unchecked (6) Auction-ID: A7-45761-796

Inv. Num. : 5648 Type: XOTM 60 Producer: UNIT Created: 2004 Parameters: Minimum tube diameter: 20 mm Maximum tube diameter: 60 mm Machine length: 4900 mm Machine weight: 130 kg

tube diameter: 6 - 42 mmwall strength: 3 mmbending radius min.: 180 mmbending radius max.: 5 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mEquipment:Saw unitNotching unitDeburring unit for internal and external edgesFlaring unit / flaring function (necking / expanding)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max tube diameter 76 mm Max thickness 3 mm Max bending degree 180 Bending radius max 260 mm

: neu : ca. 4 Wochen ab Auftragse : Italien : 3620 €: 38 mm: 245 mm: 300 mm: 320 mm: 23 kg: 19 cm³: 38 x 1,5 mm: 38 x 1,5 mm: 35 x 3 mm: 30 x 2 mm: 35 x 1,5 mm: 42 x 1,5 mm: 42 x 1,5 mm: 50 x 2 mm: 50 x 2 mm: 50 x 4 mm: 20 mm: 10 x 25 mm: 25 x 20 (stehend), 25 x 1 mm: 180 mm: 36 mm: 10 mm: 2,8 U/min: 0.9 kWdigital adjustment of the bending angle from 0 - 180 °single phase motor 220V / 900Welectric engine brakeindicator light for indicating overloadbasement made of cast iron, suitable for mounting a tripod (tripod not included)90° bend in 6 secondsfoot pedalwithout toolsOPTIONAL EQUIPMENT:tripod € 330,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 60 mm, 2 mm

Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-way adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 thorns - Mandrel retraction device - Foot pedal - Bending speed adjustment Country of origin: the Netherlands Motor power: 7.5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

: neu : ca. 10 Wochen ab Auftrags : Italien : 106340 €: 2009.83 €: 150 mm: 1000 mm: 1900 mm: 1475 mm: 2700 kg: 170 cm³: 150 x 7,1 mm: 6 x 7,11 mm: 150 x 9 mm: 141,3 x 6,55 mm: 141,3 x 6,55 mm: 168,3 x 9 mm: 168,3 x 9 mm: 64 x 6 mm: 88,9 x 3,65 mm: 110 mm: 150 x 45 stehend, 150 x 6 mm: 800 mm: 100 mm: 10 mm: 1 U/min: 15 kWTCPlus Control with 7 TouchscreenProgrammable bending speed for each individual bendPossibility to bend left and rightUsers manaulThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Original MINGORI® Model OB40 - Mobile hydraulic tube bending machine with manually operated hand pump, suitable for bending pipes according to DIN, API and ASA standard, as well as coated PE-HD pipes. The machine works in the compression bending process. The greatest surmountable material resistance torque that can be overcome with the machine is about 28 cm³. Maximum bending force 18 tons Maximum bendable pipe diameter 88.9 mm Smallest possible bendable pipe diameter 17.2 mm Smallest bending radius depending on the radius of the bending punch from 46.5 mm to 330 mm Smallest bending angle 110° (this machine also available for bending angles up to 180°) Weight of the basic machine approx. 140 kg The machine is delivered in a storage chest – Dimensions of the chest approx. 102 x 32 cm x H 41 cm Weight basic machine 140 kg With electrically operated hand pump (as mo ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 €: 239.23 €: 60 mm: 500 mm: 760 mm: 1000 mm: 186 kg: 10 cm³: 60 x 4 mm: 2 x 3,91 mm: 60 x 4 mm: 60 x 2 mm: 60 x 3 mm: 60 x 6 mm: 64 x 6 mm: 64 x 6 mm: 63 x 4 mm: 50 x 4 mm: 35 mm: 35 x 35 mm: 60 x 20 stehend, 60 x 35 mm: 380 mm: 10 mm: 10 mm: 1,5 / 3 U/min: 1.5 kWquick-change tooling systemdigital display of bending anglematerial spring back compensationfoot pedal for hands-free operationaccurate counterbending die positioningusers manualtools not included, priced on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Unbek. Type, YOC ca. 1990, Revision 2002 Specifications: - Bending capacity at 45 kg / mm² up to approx. Ø 25 x 3 mm - Bending angle left + right selectable - Hydr. Double-sided bending function - Hydr. Delivery ° - Drive 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - with - bending angle adjustment - Hydr. Voltage - Bending tools

: neu : ca. 4 Wochen ab Auftragse : Italien : 9340 €: 180.26 €: 48 mm: 570 mm: 410 mm: 1000 mm: 110 kg: 6 cm³: 48 x 3,5 mm: 11/2 x 3.68 mm: 54 x 1,5 mm: 50 x 4 mm: 48 x 2 mm: 48 x 2 mm: 60 x 3 mm: 64 x 2 mm: 64 x 2 mm: 60 x 2 mm: 50 x 4 mm: 32 mm: 45 x 16 stehend, 45 x 25 mm: 300 mm: 10 mm: 10 mm: 2/3 U/min: 1.5 kW3 phasedigital display of bendmaterial spring back compensationquick-change tooling system2 hexagonal tool holdersaccurate counterbending die positioningportable with base wheelsfootswitchusers manualALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST):SB 48M (single phase, 2 r/min) Model with TCPlus control on requestMACHINE-KIT WITH TOOLS (PRICES ON REQUEST):Art.Nr.maschinetuberadiusSB 48M K2DSB 48MGas inch2 x ØSB 48T K2DSB 48TGas inch 2 x Øtools:Ø 1/2", (21,3 mm), R46Ø 3/4", (26,9 mm), R56Ø 1", (33,7 mm), R67Ø 1", 1/4 (42,25 mm), R90 ...

Inv. Num. : 5725 Type: A 89 TNCB Producer: CSM Created: 2014 Parameters: Maximum bending angle: 180 pcs Total power requirement: 15 kW The largest profile: 60x60x6 mm bending radius in the middle of the tube: 350 mm bending radius in the middle of the profile: 300 mm Machine height: 1200 mm Machine length: 4700 mm Machine width: 1200 mm Machine weight: 2500 kg

: neu : ca. 8 Wochen ab Auftragse : Italien : 14020 €: 269.18 €: 76 mm: 370 mm: 680 mm: 910 mm: 193 kg: 15 cm³: 76 x 3 mm: 2 x 5,4 mm: 76 x 3 mm: 70 x 4 mm: 76 x 1,6 mm: 76 x 4 mm: 76 x 6 mm: 76 x 6 mm: 76,3 x 3,25 mm: 50 x 4 mm: 45 mm: 75 x 15 stehend, 75 x 30 mm: 380 mm: 10 mm: 10 mm: 1/2 U/min: 3.5 kWdigital display of bendmaterial spring back compensationquick-change tooling system2 hexagonal tool holders (40 and 50 mmaccurate counterbending die positioningfoot pedalusers manualtools not includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: - Bending capacity - steel pipe of 20 - 60 x 4 mm - - stainless steel pipe of 20 - 50 x 3 mm - max. resistance moment 6.2 cm - max bending angle 180° - max radius 125 mm - Bending speed 8 sec - Drive 400 V / 3 kW - Space requirement approx. L 2400 x H 1600 x D 1000 mm - Weight approx. 1400 kg - with: - Bending angle control via potentiometer with digital display - 6-fold bending angle preselection - Indoor + external pipe deburrer - Bending tools Rx2.5D x 38 ; • 50 , 65 ;

: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 €: 555.81 €: 100 mm: 500 mm: 1200 mm: 850 mm: 480 kg: 43 cm³: 100 x 6 mm: 3 1/2 x 4 mm: 100 x 6 mm: 100 x 3,6 mm: 100 x 3,6 mm: 114,3 x 6,3 mm: 114,3 x 6,3 mm: 114,4 x 6,3 mm: 88,9 x 3,65 mm: 100 x 5 mm: 70 mm: 100 x 25 stehend, 100 x 5 mm: 400 mm: 36 mm: 10 mm: 0 - 1,3 U/min: 3.5 kWquick-change tooling systemdigital display of bendmaterial spring back compensationremote control of bend, return and emergency stop functionsaccurate counterbending die positioningfootswitch3 hexagonal tool holdersheavy-duty steel gear caseusers manaultools not included, prices on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race

: neu : ca. 8 Wochen ab Auftragse : Italien : 39500 €: 754.45 €: 127 mm: 850 mm: 1200 mm: 850 mm: 720 kg: 80 cm³: 127 x 7,1 mm: 4 x 8,56 mm: 127 x 7,1 mm: 114,3 x 5,6 mm: 114,3 x 5,6 mm: 139,7 x 8,8 mm: 139,7 x 8,8 mm: 64 x 6 mm: 88,9 x 3,65 mm: 50 x 4 mm: 90 mm: 130 x 25 stehend, 130 x 6 mm: 700 mm: 36 mm: 10 mm: 0 - 0,75 U/min: 3.5 kWdigital read out for bending angle4 hexagonal tool holders (40, 50 80 and 110 mm)Possibility to bend left and rightUsers manaulTools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

CONTROLS  CNC controls WAFIOS TECHNICAL SPECIFICATION  Max. diameter of tube: 12.7 mm  Max. wall thickness: 1 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2810 mm  space requirements -front/back-: 1350 mm  total height: 1380 mm  total weight approx.: 2600 kgTechnical Specifications:- 3-axis bending head- 3-axis gripper- Tube diameter, max. 12.7 x 1 mm- Wire diameter, max. 8 mm- Single stroke: 750 mm- Bar length: up to 2500 mm- Pneumatic gripping pliersProgramming: Graphical interface

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45834-228

: R10-R260 bending speed: 2,5 U/min: 54,0 x 2 mmSheet thickness aluminum: 54,0 x 2 mm: 42,4 x 3 mmsheet thickness for stainless steel: 42,4 x 2 mm: 30 mm: einphasig - 230 Vdrive motor: 1,5 kWweight of the machine ca.: 80 kgdimensions of the machine ca.: 363 x 900 x 595 mm‘ERCOLINA MEDI BENDER’Single-phase mandrel-less bending machine up to 42 mmFeatures:- Control system: Soft-touch control panel in 8 different languages- Number of programs: 30, each with 9 bends- Standard accessories (including foot switch, user manual)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45833-26

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45833-228

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45832-1

: neu : 2024 : 9721 : prompt, Zwischenverkauf v : Italien : 7780 €: 150.15 €: 1 : 1 : 42 mm: 400 mm: 570 mm: 1000 mm: 80 kg: 4 cm³: 42 x 3 mm: 48 x 1,5 mm: 42 x 4 mm: 42 x 2 mm: 42 x 2 mm: 50 x 3 mm: 54 x 2 mm: 54 x 2 mm: 60 x 2 mm: 50 x 4 mm: 30 mm: 40x20 (liegend), 40x12 (s mm: 260 mm: 10 mm: 3,3 U/min: 1.1 kWmanual clampingelectronic preselection of bending angledigital read our for Clamping position30 programms with each 9 bendsmaterial spring back compensationoverload protectionmobile by rolls and handlefoot pedaltools not includedAlternatively also available as following models (prices on request):MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  CNC controls SIEMENS TECHNICAL SPECIFICATION  Max. diameter of tube: 120 mm  Max. bending radius: 180 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 8000 mm  space requirements -front/back-: 2600 mm  total height: 2300 mm  total weight approx.: 16500 kgmachine in a very good conditionMachine in very good conditionSpecial features:- Free-form bending option- Laser scanner for securing the bending area- Foot pedal for safe start- Bending simulationAutomation:- CNC control BEND MOTION CONTROL- Automatic mandrel lubrication as MMSRetrofit 2018:- Control system retrofit- Cables replaced- Bending head overhauled- Guides replaced- complete equipment (see photos)(Ø22x2, Ø28x2, Ø38x2.6, Ø42.4x2.6, & ...

tube diameter: 42.0 x 3.0 STAHL mmtube diameter: 30.0 x 2.0 EDELST mmbending angle max.: 180 °bending radius max.: 100 mmbending speed: 2.0 U/min.Control: NC voltage: 400 Vtotal power requirement: 0.55 kWweight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine baseDescription:- NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored- Automatically returns to the starting position- Maximum bending capacity for 42 x 3.0 mm steel tubes- Excellent bending quality with very tight bending radii (from 2x tube diameter). and bending angles between 0° and 180°- Easy operation- High accuracy and reliability- Quick tool change (within seconds)- Easy to transport- Includes machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60.3 x 4.5 mm STtube diameter: 60.3 x 5.4 mm ALUtube diameter: 2 x 3.91 mm GASbar material - diameter: 35.0 mmrevolutions per minute: 2.0 U/minbending radius min.: 10.0 mmbending radius max.: 270 mmexternal diameter: min. 5.0 mmexternal diameter: min. 1/8 Zollvoltage: 230 Vtotal power requirement: 1.5 kWweight: 76.0 kgrange L-W-H: 302 x 243 x 674 mmEquipment:- mandrel-less tube bending machine- Model M = ELECTRO-HYDRAULIC SINGLE-PHASE- high performance and compact design- completely hydraulic machine- bends 210° without the need to catch up- no electronic control- Ercolina patent n. 102017000142179- control of the bending angle via adjustable angle scale- mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 273 mmwall strength: 15,1 mmbending radius min.: 150 mmbending radius max.: 1250 mmtotal power requirement: 30 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gasleiding: Ø50 x 3,91 mm stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 amp; 2,5 rpm video klik hierLength: 900 mm Depth: 400 mm Height: 1100 mm Weight: 140 kg

tube diameter: 48,3 mmwall strength: 3,25 mmbending radius min.: max. 180 mmBending speed: 20 °/sectotal power requirement: 2,4 kWweight of the machine ca.: 700 tdimensions of the machine ca.: 3880 x 800 x 1250 mDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 10.0 - 60.0 mm Stahlwall strength: 3.0 mm Stahltube diameter: 64.0 mm CU/Aluwall strength: 4.0 mmrevolutions per minute: 1.25 - 2.50 U/minbar material - diameter: 35.0 mmvoltage: 400 VoltControl: ISITAN NC total power requirement: 2.0 kWweight: 140 kgrange L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request- Steel tube capacity: 60.0 x 3.0 mm- Gas tube capacity: 2 Gas x 3.91 mm- Square profile capacity (FE 42) 60 x 30 x 4.0 mm- Max. bending radius: 200 mm- Minimum radius: 2 x D- Hexagonal tool holder- Min. outer diameter: 5 mm - 1/8 GasEquipment:- ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each- Patented quick tool change system- Continuously adjustable bending speed- One bending speed- 1 free-floating foot switch- 1 bending tool set included Additional segments available upon reque ...

tube diameter: 10.0 - 42.0 mm Stahlwall strength: 3.0 mm Stahltube diameter: 54.0 mm CU/Aluwall strength: 2.0 mmbar material - diameter: 30.0 mmrevolutions per minute: 1.30 U/minvoltage: 400 Volttotal power requirement: 1.5 kWweight: 110 kgrange L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request- Steel tube capacity: 42.0 x 3.56 mm- Gas tube capacity: 1 1/4 Gas x 3.5 mm- Square profile capacity (FE 42) 40 x 20 x 2.6 mm- Max. bending radius: 200 mm- Minimum radius: 2 x D- Hexagonal tool holder- Min. outer diameter: 5 mm - 1/8 GasFeatures:- Patented quick tool change system- One bending speed- Digital machine display- 1x freely movable foot switch- 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holderThe data for this ad was created with ModulMWS - the software solution of Log ...

tube diameter: 33,7 x 3,4 GAS mmtube diameter: 35,0 x 2,5 STAHL mmtube diameter: 35,0 x 1,5 EDELST mmbending radius min.: R10 - R 190 mmbending angle max.: 0 - 180 °tool taper: 6-kant 40 mmvoltage: 230 Vtotal power requirement: 0,9 kWweight of the machine ca.: 23,0 kgDescription:- MediBender 070 digital- with maximum bending performance for 35 x 2.5 mm steel tubes- Excellent bending quality with very tight bending radii. (from 2 x tube diameter) and bending angles between 0° and 180°- Easy to operate- High accuracy and reliability- Fast tool changes (within seconds)- Easy to transport- Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 1/2 - 2.0 Zollwall strength: 2.75 - 4.5 mm STpressure: 10.0 tweight of the machine ca.: 46.0 kgWith a hinged bending frame for efficient work- Various bending dies included- Universally applicable for gas, boiler, and water pipes- Fast work thanks to rapid feed- With a tripod stand for safe work- Also ideal for copper and coated pipes- Bends up to 90° can be createdFeatures:- Bending dies: ½ - ¾ - 1 - 1 ¼ - 1 ½ - 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: ? mmwall strength: ? mmbending radius min.: ? mmroll diameter: div. ca. 100 - 240 mmroll diameter - bore: 60 mmShipping weight: 950 kgPacking: 1,20,80,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 12-54 mm (Kupfer / Edels. mmserial number: EBD 022 99 002 mode of operation: Schneiden/ Entgraden / Re speed: Rollen 450 U/min m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.