lathes used for sale (2,809)

This Johnford SL-70A was manufactured in 2006. A robust horizontal turning machine featuring a swing over bed of 700mm and a swing over cross slide of 540mm. It has a spindle bore of 115mm and a bar capacity ranging from 91 to 102mm, suitable for diverse turning tasks. Consider the opportunity to buy this Johnford SL-70A horizontal turning machine. Contact us for more information about this machine.

This XYZ XL780 was manufactured in 2015. A robust horizontal turning machine featuring a Siemens 828D ShopTurn control, it offers a swing over bed of 780mm and a maximum cutting length of 2,900mm. The spindle supports a 160mm diameter with speeds up to 1300 rpm. Includes a 3-jaw manual chuck and multiple steady rests. If you are looking to get high-quality turning capabilities consider the XYZ XL780 machine we have for sale. Contact us for more information.

Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

DATASHEET – RAMO TN20 CNC LATHE Manufacturer: RAMO Industrie SA Model: TN20 Numerical control: NUM 1060 (Telemechanical) Type: Inclined Bench CNC Lathe Condition: Good general condition, visible machine under power ⚙️ TECHNICAL SPECIFICATIONS Power supply: 3 × 400 V – 50 Hz Current rating: 63 A Control voltage: 110 V ~ Signaling voltage: 110 V ~ Lighting voltage: 220 V ~ Clutch voltage: 24 V = MECHANICAL CAPACITIES (TN20 standard) Turning diameter above the bed: 420 mm Turning diameter above carriage: 250 mm Length between toes: 500 mm Z-axis travel: 500 mm X-axis travel: 200 mm Spindle passage: Ø 40 mm Spindle speed: 30 to 4000 rpm Spindle Cone: Camlock D1-4 Spindle motor power: 7.5 kW Fast feeds: 10 m/min (X and Z axis) Tool Turret: 8 automatic positions DIMENSIONS AND WEIGHT Dimensions (W × D × H): app ...

Parallel Lathe WABECO D6000E Between points: 600 mm Maxi Ø on bench: 270 mm Maxi Ø over saddle: 170 mm Spindle speed: from 45 to 2300 RPM Multifix turret type A Concentric 3-jaws chuck Ø 100 mm (NEW) Year of construction: 1998 (machine very little used) Spindle speed by variator Tailstock CM2 Scale 2 axes EAE type Mikronel 220 L Supplied with one clamp tie rod Accessories: 5 tool holders + different thread wheels Voltage: 220 V mono Dimensions (L x W x H): 1500 x 900 x 1700 mm Weight: approx 200 kg

Parallel Lathe JET PROMAC 941 V Between points: 500 mm Maxi Ø on bench: Ø 240 mm Maxi Ø over saddle: Ø 140 mm Spindle diameter: Ø 21 mm Spindle speed: from 100 to 1700 RPM Square turret Chuck: 3-jaws Ø 125 mm Year of construction: 2012 - Almost new Spindle motor: 1,3 kW Threadings: Metric + Whitworth Tailstock: CM2 Variable speed drive for the spindle Supplied with one 4-jaws chuck Ø 125 mm Supplied with the gears for threading Electronic tachometer Voltage: 220 V mono Dimensions (L x W x H): 1200 x 600 x 1400 mm Weight: approx 200 kg

Workbench parallel Lathe WABECO 10200 Between points: 500 mm Maxi Ø on bench: Ø 200 mm Maxi Ø over saddle: Ø 120 mm Spindle diameter: Ø 26 mm Spindle speed: from 10 to 1000 RPM (on electronic dimmer) Square/ tilting turret 3-jaws chuck Ø 100 mm Year of construction: 2001 Tailstock CM2 Longitudinal auto feeds Supplied with the gears (see photo) Supplied without the table Voltage: 220 V mono Dimensions (L x W x H): 1200 x 300 x 450 mm Weight: approx 100 kg

Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth TailstockCM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T

Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T

CNC Lathe REALMECA type T400 Travel X: 200 mm Travel Z: 600 mm Numerical Command: NUM 750 Between points distance: 700 mm Max machining diameter: Ø 210 mm Spindle speed: from 100 to 4000 RPM 12 tools Turret VDI 20 3-jaws chuck Ø 140 mm Year of construction: 1993 Spindle motor: FANUC Tailstock: CM4 Hydraulic Tailstock + Chuck Lubrification Voltage: 380 V Dimensions (L x W x H): 2500 x 1500 x 1700 mm Weight: approx 3 T

Key data: 3600 mm, 4200 mm, 4800 mm

Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,600 mm Circumferential diameter (max.) 4,200 mm Workpiece height (max.) 4,800 mm Total height of the machine 8,700 mm Maximum workpiece weight 80,000 kg. Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam in 100 mm increments 2,800 mm Crossbeam Support (Right) Horizontal adjustment support - 1,800 to + 2,200 mm Vertical displacement of the chisel slide valve 1,500 mm Cross-section of the chisel slide 240x240 mm Tool stations 20 pcs. Side Support (Right) Vertical adjustment support 2,800 mm Horizontal displacement of the chisel slide valve 1,000 mm Cross-section of the chisel slide 240x240 mm Turning diameter max./min. 4500/2500 mm Tool Changer Main Drive: Main motor power 105 kW Face plate speed ...

Key data: 4000 mm, 5000 mm

Specifications Control SIEMENS SINUMERIK 840 Dsl Main dimensions and travels Face plate diameter 4,000 mm Circumferential diameter (max.) 5,000 mm Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Crossbar Vertical adjustment of the crossbeam 3,200 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support - 2740 + 2740 mm Vertical displacement of the chisel slider 1,800 mm Cross-section of the chisel slider 250x210 mm Side Support (Right) Vertical adjustment support -25 + 2170 mm Horizontal displacement of the chisel slider 1,000 mm Cross-section of the chisel slider 250x210 mm Turning diameter max./min. 4,500/2,500 mm Main Drive: Main motor power 100 kW Face plate speed range 0.63 – 63 rpm. Maximum torque a ...

Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,500 mm Circumferential diameter (max.) 4,000 mm Workpiece height (max.) 3,000 mm Total height of the machine 7,250 mm Maximum workpiece weight 50,000 kg Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam 1,500 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Stations Crossbeam Support (Left) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Changer Main Drive: Main motor power 100 kW Face plate speed range 1-100 rpm. Maximum torque at the face plate 100  ...

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T

Parallel Lathe SOCOMO type STAR 305 Between points: 700 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 175 mm Spindle diameter: Ø 36 mm Rotation: from 70 to 2000 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Length: 1800 mm Depth: 800 mm Total height: 1200 mm Weight: approx 1 T

This 6-axis Romi GL 350B CNC Horizontal Turn-Mill Center was manufactured in 2014. It features a maximum workpiece diameter of 350 mm and a main spindle speed of 4,000 rpm. The machine is equipped with a counter spindle with a speed range of 6 – 6,000 rpm, driven tools, Y-axis capability, and a 12-position BMT-65 turret. The machine configuration includes controlled axes X, Y, Z, A, B and C, allowing complex turn-mill operations. If you are looking to achieve high-quality turning and milling capabilities, consider the Romi GL 350B machine we have for sale. Contact us for further details.

This 3-axis Romi C420 was manufactured in 2013. It features a swing over bed of 430 mm and a distance between centers of 1,000 mm. The machine is equipped with a Siemens 802D control unit and has a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Romi C420 horizontal turning machine we have for sale. Contact us for further details.

This 5-axis DOOSAN Lynx 2100LSYA lathe was manufactured in 2020. Featuring a SIEMENS SINUMERIK 828D control, it offers spindle speeds up to 6000 rpm and includes a sub-spindle for versatile operations. With a max turning diameter of 300 mm and length of 510 mm, it also has driven tools and rapid traverse rates up to 36 m/min. Consider this Doosan Lynx 2100LSYA lathe, ideal for advanced turning tasks. For more information, please reach out to us.

This 3-Axis DMG MORI CLX 450 V4 was manufactured in 2020 and features advanced technology cycles like drilling, threading, and grooving, along with a main spindle speed of 4,000 rpm. Its equipped with a turret that includes 12 driven tools and 6 BT stations, and boasts a direct measurement system in X and Y axis with a Y-axis range of +/- 60mm. Control is managed by the sophisticated SIEMENS 840D. Buy this DMG MORI CLX 450 V4 lathe to leverage its precision capabilities. For further details, please contact us.

This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine.

This ERGOMAT TNG 32 was manufactured in 2022. It features a spindle with a bar capacity of Ø 32 mm and a maximum speed of 5000 rpm. The horizontal turning machine includes a Fanuc Oi-TF control and an LNS bar loader with a 3m capacity. Consider the opportunity to buy this ERGOMAT TNG 32 horizontal turning machine. Contact us for more information.

This 3-axis DMG CTV-250 was manufactured in 2012. It features a maximum workpiece diameter of approximately 350 mm and a chuck diameter of 250 mm. The machine is equipped with a 12-position turret and operates at spindle speeds of up to 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTV-250 vertical turning machine we have for sale. Contact us for further details.

This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details.

This 6-axis AMADA Wasino JJ3 was manufactured in 2007. It features a twin spindle, twin turret turning cell with a maximum spindle speed of 4000 rpm and a chuck size of 8”. The machine is designed for high-volume production with automatic loading and unloading capabilities. If you are looking to get high-quality turning capabilities, consider the AMADA Wasino JJ3 horizontal turning machine we have for sale. Contact us for further details.

This 3-axis DN solutions LYNX 2100LMSA was manufactured in 2022. It features a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine includes a 6-inch chuck size, a 12/24 station turret, and a sub-spindle for enhanced capabilities. If you are looking to get high-quality turning capabilities, consider the DN Solutions LYNX 2100LMSA horizontal turning machine we have for sale. Contact us for further details.

This 9-axis TAKISAWA TM-2000Y2 CNC Horizontal Turning Center was manufactured in 2022. It features a twin turret configuration with dual Y-axis capability, allowing for simultaneous machining. The machine includes a sub-spindle for complete machining and is compatible with bar work. If you are looking to get high-quality turning capabilities, consider the TAKISAWA TM-2000Y2 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine.

Horizontal turning machine manufactured in 1998. This DMG Mori Seiki CL-200B features an X-axis travel of 398 mm and Z-axis travel of 214 mm. It is equipped with a Renishaw tool setter and a workpiece catcher that has never been used. The machine has approximately 10,000 operating hours and has always been operated in a single-shift environment. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki CL-200B machine we have for sale. Contact us for further details.