lathes used for sale (3,038)

turning diameter: 555 mmturning length: 1500 mmturning diameter over slide: 290 mm3-jaw-chuck diameter: 315 mmmake: Röhn control: Monforts MTCKquick change tool holder: Multifix C steady: turning speeds: 2-2800 U/mintransmission ratio: 3 face slide travel: 235 mmspindle passage: 70 mmtailstock quill taper MT: 5 total power requirement: kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,9x1,6x1,8 mAbout usmore than 400 machines in the warehouse over 12000 m² storage area,crane capacity 70 tmore than 1000 items accessories for your workshopYou wantto sell machines production lines or your company, then talk to us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 120 mm Center width: 450 mm Spindle passage/bore: 23 mm Board width: 100 mm Speeds: (12) 180 - 2240 min-1 Travel upper carriage: 140 mm Tailstock mount: MK 2 Quill stroke: 80 mm Motor power: 2.5 kW Connection: 400 V Dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Piercing device Quick release holder System Multifix, size Aa Machine light Coolant device

Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of construction: 1981 Weight: 11t General / technical data: turning length: 125mm workpiece diameter: 168mm max drilling depth: 125mm Adjustable quantity: from 3.4 to 450 sec. Operating hours: 8.200h Working spindle speed: from 90 – 1120 rpm Installation area (l x w x h): approx. 4730 x 1700 x 2120mm Power Supply: 380V / 50Hz Accessories: 7 cross slides 8 longitudinal slides Tapping device 4x 2-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of lining: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of feed: Röhm 1W-406 681 Clamping force 1800 da N Insert arm over lining 100mm. The workpiece is fed to the insert arm by a swivel arm and rotary gripper. Rem ...

Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine no.: 7.0176 Year of construction: 1987 Weight: 11t General / technical data: Portal-6spindle automatic lathe with measuring device and automatic feeding Spindle dividing circuit: 300mm Number of longitudinal slides: 6 Number of cross slides: 2 gr. cross slide stroke: 60mm gr. longitudinal slide stroke: 125mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Stepless 1.95 – 78 sec. Low time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20kW; Feed rates 8kW Installation area: approx. 1720 x 4700mm Remark: The machine cannot be converted for bar work. Equipment: – 1 creep gear drive for set-up operation – 1 automatic central lubrication device – 1 coolant device with lines and pu ...

Deir piece 3 cheek chuck Brand Forkardt 2x 315 mm diameter and 97 mm high 1x 200 mm diameter and 75 mm high with various attachment jaws The retail price is net.

GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...

2012 Muratec MW 120 GT Metal 2012 Muratec MW 120 GT and more: Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes Tsugami NP-32 can be viewed under power. Currently not in operation 1992 yes Riello in operation, can be viewed during operation. 2002 yes

Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes Tsugami NP-32 can be viewed under power. Currently not in operation 1992 yes Riello in operation, can be viewed during operation. 2002 yes Muratec MW 120 GT 2012

turning diameter over bed: 330 mmturning diameter over slide rest: 190 mmcentre distance: 650 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mturning length: mm3-jaw chuckMultifix tool holder devicetail stock coolant deviceTechnische Daten / technical details:Spitzenweite / center to center 650 mmDreh-Ø über Bett / turning diameter over bed 330 mmDreh-Ø über Schlitten / turning diameter over sledge 190 mmSpindelbohrung / spindle hole 36 mmDrehzahlbereich / spindle speed 30-2500 UpM /rpmAntriebsleistung / drive capacity 2,2 kWGewicht der Maschine ca. / weight ca. 600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech ...

turning diameter over bed: 1100 mmturning diameter over slide rest: 780 mmturning length: 4100 mmControl: Siemens type: 840 D bed width: 710 mmfaceplate: 1000 mmturning speeds: 1110 U/mintotal power requirement: 4,79-69 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 250 mm Center width: 1500 mm Circulation Ø: over bed 500 mm Spindle bore: 63 mm Spindle holder: Size 8 Mounting cone tailstock: 5 MK Spindle speeds: 170 - 2240 rpm Feeds: longitudinal/flat 0.014-1/0.0063-0.45 mm/U Thread pitches: 0.1 - 112 mm electrical connection: 380 V, 7.5 kW Space requirement: 2300 x 1000 x 1400 mm Weight: 2360 kg

diameter: 250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm  ...

In 2020, the machine was extensively overhauled for 7000 €. Proof available. Processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Centering drilling Workflow fully automatic: - Tensioning, feeding to - Rapid traverse forward - Work feed - Dwell time for cutting - Rapid traverse back - Relax, feed on Specifications: workpiece diameter approx. 80 mm workpiece diameter 6kt-SW 70 mm min. workpiece diameter round and 6kt 10 mm min. workpiece length 450 mm Speed range infinitely variable Level I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1.3/1.8 Engine power Coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

General: Year of construction 2003 Switch-on hours 33,321 h Working hours 10,144 h Control Siemens 840D ShopTurn Travel X 400 mm Z 400 mm Rapid traverse 12 mm/min Spindle: Spindle speed 8,000 rpm Rod passage 32 mm Turning diameter 120 mm Revolver: Number of stations 16-fold Number of driven tools 8 Tool holder VDI16 Dimensions and weight: Dimensions 2.500 x 1.400 x 1.700 mm Weight approx. 2,300 kg Other equipment and included accessories: Tailstock programmable Electronic handwheel Oil mist extraction Preparation for bar loaders

turning diameter: 420 mmturning length: 1000 mmcontrol: Fanuc 10 T Monforts Control Fspindle passage: 65 mmturning speeds: 4000 U/minchip conveyor: Tool turret 12 positions: total power requirement: 22 kWweight of the machine ca.: 4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mmcentre height: 510 mmwidth: 110 mmloading area: 360x310 mmdiameter of quill: 80 mmbearing diameter: 75 mmWheel width: 36,5 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 490 mmturning diameter over slide rest: 280 mmturning length: 2000 mmcentre height: 245 mmcentre distance: 2000 mmspindle bore: 62 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3,5 tdimensions of machine L x W x H: 3,78 x 1,17 x 1,42 mAccessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, solid steady, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3000 mmswing diameter: 3500 mmturning height: 3200 mmControl: Fanuc type: Series 320i Model Aslide adjustment: 1750 mmram head dimension: 300x300 mmx-axis: 2700 mmTable load: 30000 kgmain drive motor: 100 kWTool changer: 16 chip conveyor: total power requirement: kWweight of the machine ca.: 89 tdimensions of the machine ca.: 8,5x6x8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Benzinger TNL / TRP I automatic lathe Machine data of the manufacturer, deviations possible. Tip height: 80.5 mm max turning length 100 mm rotational diameter over. Bed 220 mm rotational diameter over. Flat sledge 130 mm max path length in x 300 mm max path length in z 240 mm Mains connection: 380 V 50 Hz All other technical data can be found in the link. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Benzinger TNL NCS1J Lathe Machine data of the manufacturer, deviations possible. Tip height: 80 mm max turning length 100 mm rotational diameter over. Bed 220 mm rotational diameter over. Flat sledge 140 mm max path length in x 300 mm max path length in z 240 mm Mains connection: 380 V 50 Hz All other technical data can be found in the link. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

turning diameter: 570 mmturning length: 1000 mmcontrol: Sinumerik 805 Siemensclamping length: ca 1200 mmgreates pass round over bed: 570 mmswing diameter over face slide: 365 mmturning speed range - main spindle: 3 - 2.500 min/-1power capacity - main spindel: 15 / 19 kWspindle bore: 62 mmspindle head: DIN 55027 No. 8diameter of quill: 80 mmtaper of center: MK 5 quill stroke: 190 mmtotal power requirement: 40 kVAweight of the machine ca.: 5,6 tLathe cycle controled- SIEMENS Sinumerik 805 / Simeodrive 611- 4-Jaw Chuck, Handwheel, Covering- Chip Tray & coolant- adjustable feet- approx 20 tool holders2021 Electrics/controls check by BoehringerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 560 mmturning diameter over slide rest: 355 mmturning length: 1500 mmspindle bore: 80 mmspindle turning speed range: 25 - 1600 U/minturning dia. in gap: 785 mmmetric threading: 0,2 - 14 mmthread - inch: 2 - 112 inch.thread - module: 34 / 0,1 - 7 mmWhitworth-thread: 60 / 2 - 112 TPIadjustment of the upper slide: 140 mmdia. of quill: 130 mmquill stroke: 120 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,8 x 1,20 x 1,5 mA comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fittedas standard and a variable speed option is available. Huvema lathes fullyconform to CE regulations. Also available in: 1,5m3 jaw chuck4 jaw chuckNewall digital  ...

turning diameter: 850 mmturning length: 2000 mmturning diameter over slide rest: 690 mmcontrol: Siemens type: 840 C Cooling through the spindle: 23 barcentre height: 450 mmspindle diameter in front bearing: 200 mmspindle hollow: 128 mmpower capacity: 60 kWturning speeds: 7-1800 U/minTorque: 7908 Nmworkpiece weight: 4000 kgtailstock quill diameter: 160 mmtailstock quill taper MT: 5 3 jaw chuck Forckrath: 600 mmTool changer: 60 work piece power: 30 kWturning speeds: 56-3000 U/mintotal power requirement: kWweight of the machine ca.: 18 tdimensions of the machine ca.: 6,3x2,4x3,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 440 mmturning length: 1500 mmcontrol: C 200 Tool changer: 16 3 jaw chuck Forckrath: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool clamping area: 200x55x195 mmweight: 0,01 t- Multifix tool holder, 5 pcs. like new, 2 pcs. less used.--- price per piece ----The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mmturning diameter over slide rest: 220 mmturning length: 600 mmturning diameter in the gap: 320 mmturning speeds: 60 - 1650 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 1,1 kWweight of the machine ca.: 340 Kgdimensions of the machine ca.: 1,4 x 0,75 x 0,7 mCenter lathe with:3-jaw chuck 160 mm.4-jaw chuck 200 mm.Faceplate 200mmFixed bezelContinuous bezel4-way steel holder.Halogen machine lightChip tray, chip protection wallHardened and ground bed tracksLongitudinal and cross feedComplete coolant systemForage protectionSet of change gearsMachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 700 mmturning speeds: 115 - 1620 U/mincentre height: 125 mmspindle bore: 27 mmtailstock quill taper MT: 2 tailstock quill stroke: 40 mmmetric threading: 0,2 - 3,5 mmthread - inch: 8 - 56 inch.thread - module: 0,2 - 12,5 mmswival range +/-: Oberschlitten 45 °connected load frequency: 400 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,41 x 0,61 x 0,41 mEquipped with- 2-axis digital measuring system with position indicator- manufactured according to DIN 8606- 27 mm spindle passage- adjustable guideways by adjustable strips- Strong engine with 0.75 kW- High resolution of the axis spindles for exact positioningDelivery:3-jaw chuck 100 mm, change gear set, splash guard 3-axisdigital measuring system fully assembled.The data for this ad was created with M ...

turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 700 mmturning speeds: 115 - 1620 U/mincentre height: 125 mmspindle bore: 27 mmtailstock quill taper MT: 2 tailstock quill stroke: 40 mmmetric threading: 0,2 - 3,5 mmthread - inch: 8 - 56 inch.thread - module: 0,2 - 12,5 mmswival range +/-: Oberschlitten 45 °connected load frequency: 400 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,41 x 0,61 x 0,41 mEquipped with- 2-axis digital measuring system with position indicator- manufactured according to DIN 8606- 27 mm spindle passage- adjustable guideways by adjustable strips- Strong engine with 0.75 kW- High resolution of the axis spindles for exact positioningDelivery:3-jaw chuck 100 mm, change gear set, splash guard 3-axisdigital measuring system fully assembled.The data for this ad was created with M ...

turning diameter over bed: 1300 mmturning diameter over slide rest: 900 mmturning length: 8000 mmspindle diameter: 153 mmtotal power requirement: 37 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.