lathes used for sale (2,809)

turn - diameter over facing slide: 450 mmturning diameter over bed: 830 mmturning diameter: mmturning length: 3000 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Rexroth System 200 BTV30 Circulation diameter over bed: 160 mm Circulation diameter over face carriage 250 mm Chuck diameter 160 mm Turning length 300 mm Spindle speed 8000 min-1 12-speed revolver with attached Competition. Workpiece conveyor belt Conveyor Various tool holders

turning diameter: 430 mmturning length: 1500 mmswing diameter over bed slide: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1400 mmturning diameter over slide rest: 1400 mmcentre distance: 1500 mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 1500 mm

The lathe allows the operator to choose between manual, automatic or combined operation. With the intuitive software, the operator can effortlessly program operations and cycles up to the finished part. Specifications: Circulation diameter over bed: 600 mm, Circulation diameter over carriage: 400 mm, Bar passage: 80 mm, Drive power: 11 KW, spindle speed in 3 gear stages 8-2,000 rpm Standard accessories: Rapid traverse for longitudinal and flat, electronic handwheels, foot brake, Multifix "C", 3-shoe chuck 250 mm

Multi-spindle lathe (8 spindles) max. rod diameter 16 mm Guide tubes 4,000 mm Conveyor

turning diameter: 210 mmturning length: 580 mmcontrol: 840 D Siemenscentre height: 190 mmturning diameter over bed: 330 mmturning dia. over face-slide: 260 mmMain spindle:: turning speed range - main spindle: max. 4.000 min/-1power capacity - main spindel: 10 / 7,5 kWmax. Torque: 115 / 86 Nmspindle bore: 68,5 mmmax. usable bar diameter: 51 mmC - Axis: 0,001 °axis stroke:: travel -x axis: 185 mmtravel -z axis: 455 mmturret:: number of toolpositions: 12 pos.tool taper: VDI 30 Driven Tool Stations:: 6 pos.Tailstock:: tailstock adjustment: 400 mmintake pressure max.: 4.000 Nfeeds:: rapid traverse: X: 20 / Z: 30 m/minFeed force ( X / Y / Z ): 4,5 kNtotal power requirement: 21 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 8,0 x 2,2 x 2,0 mDocuments: Chip conveyor: Coolantsystem: Tailstock: parts catcher: C-axis: driven tool stations: Signal-Light: bar feeder: I ...

Ref. -No.: 10374Manufacturer: MONFORTSYear of construction: 2000Type of control: Zyklen gesteuertControl: MONFORTS ControlStorage location: HalberstadtCountry of origin: Germany

Ref. -No.: 10372Manufacturer: STAMAYear of construction: 2021Type of control: CNCControl: SINUMERIK Siemens 840 D slStorage location: HalberstadtCountry of origin: SwitzerlandTurning Speeds: 4200 RPMX-axis travel: 615 mmY-axis travel: 290 mmZ-axis travel: 500 mmNumber of tools in the chain magazine: 64 Max. Rapid traverse: 65 m / minMax. Feed force: 4000 NAcceleration (X): 7 m/s²Acceleration (Y): 9 m/s²Acceleration (Z): 13 m/s²Further information:- Ball screw- Automation- Workpiece loading/unloading chuck parts with X- / Z- gantry loader- Clamping pressure preselection 15 - 50 bar for both spindles- Buffer station for constant short chip-to-chip times- NCU High Performance NCU 730.3.m- Magnetic gripper

Ref. -No.: 10369Manufacturer: MONFORTSYear of construction: 2005Type of control: CNCControl: MTCK/Euro TurnStorage location: HalberstadtX stroke: 450 mmZ - stroke: 3850 mmCentre Distance: 3970 mmFeed Capacity - Z: 20,7 kNFeed Capacity - X: 10,1 kNRapid Travel Speed X-Axis: 4 m / minRapid Travel Speed Z-Axis: 5 m / minTailstock Quill Diameter: 125 mmTailstock Quill Stroke: 200 mmCircumference diameter over slideway: 830 mmCircumferential diameter over radial slide: 540 mmspindle taper diameter: 140 (Metrisch) mmQuills Morse taper: MK6 Max swing diameter: 900 mm

Ref. -No.: 10367Manufacturer: WEILERYear of construction: 1996Type of control: CNCControl: SiemensStorage location: HalberstadtCountry of origin: GermanyTurning Speeds: 500 RPMMachine length: 7000 mmMachine width: 2300 mmMachine Height: 2600 mmWeight Of The Machine Ca.: 9,25 tSpindle Taper: 6 Mk Travel quill: 300 mmBed width: 800 mmTurning Length: 3000 mmTurning Diameter Over Bed: 900 mmSwing Diameter Over Bed Slide: 530 mmSpindle Bore: 254 mmSpindle power: 45 kWTailstock - Insertione Into The Sleeve: 140 Ø Max. Workpiece Weight: 5000 kgFurther information:Machine can be inspected under power.

Ref. -No.: 10366Manufacturer: MONFORTSYear of construction: 2000Type of control: CNCControl: EURO TURNStorage location: HalberstadtCountry of origin: DeutschlandMachine length: 5000 mmMachine width: 1970 mmMachine Height: 1800 mmX stroke: 370 mmZ - stroke: 2880 mmChuck diameter: 200/250/315 mmCentre Distance: 3040 mmSpindle Head: DIN 55027 - 8x220 Feed Capacity - Z: 18,9 kNFeed Capacity - X: 11,3 kNRapid Travel Speed X-Axis: 5 m / minRapid Travel Speed Z-Axis: 10 m / minCircumferential diameter over radial slide: 350 mmMax swing diameter: 720/630 mmtravel of the cross slide: 375 mmSpindle head max. passage for violent material: 68 mmSpindle head max. passage for bare material: 70 mmTailstock outside diameter of the quill: 110 mmTailstock maximum quill stroke: 210 mmTailstock inner cone: MK6 TypeFurther information:Additional lubricating oil tank approx. 6l

Ref. -No.: 10365Manufacturer: MONFORTSYear of construction: 1997Type of control: CNCControl: MTC KStorage location: HalberstadtCountry of origin: DeutschlandMachine-No.: 178.05 Machine length: 5200 mmMachine width: 2110 mmMachine Height: 1995 mmWeight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) tX stroke: 455 mmZ - stroke: 2850 mmChuck diameter: 315/400/500 mmCentre Distance: 3000 mmSpindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kNFeed Capacity - X: 11,3 kNRapid Travel Speed X-Axis: 6,8 m / minRapid Travel Speed Z-Axis: 4 m / minCircumferential diameter over radial slide: 540 mmMax swing diameter: 830 mmtravel of the cross slide: 450 mmSpindle head max. passage for violent material: 88 mmSpindle head max. passage for bare material: 90 mmTailstock outside diameter of the quill: 125 mmTailstock maximum quill stroke: 200 mmTailstock inner cone: MK6 Typ ...

Ref. -No.: 10364Manufacturer: MAZAKYear of construction: 1997Type of control: CNCControl: MAZATROL T PLUSStorage location: HalberstadtCountry of origin: JapanMachine length: 6365 mmMachine width: 3180 mmMachine Height: 2800 mmWeight Of The Machine Ca.: 7 tBar passage: 64 mmMax rotation diameter: 510 mmTurning Diameter: 400 mmTurning Length: 1539 mmSpindle power: 22-26 kWSpindle Speed Min.: 35 RPMSpindle Speed Max.: 3500 RPMRapid Travel Speed X-Axis: 12 m / minRapid Travel Speed Y-Axis: 10 m / minRapid Travel Speed Z-Axis: 18 m / minMotor power milling spindle: 7,5 kWMax. speed milling head: 15-6000 RPMX-axis travel: 450 mmY-axis travel: +/- 90 mmZ-axis travel: 1539 mmNumber of tools in the chain magazine: 40 (15 + 25) POS Further information:The main spindle was replaced with a new one in Oktober 2019. In the course of this, small spare parts were renewed or reworked.

Ref. -No.: 10362Manufacturer: SCHIESSYear of construction: 2023Type of control: CNCControl: Siemens - Heidenhain - Fanuc (configurable)Storage location: HalberstadtCountry of origin: Germanyfinancing: nach AnfrageSpindle Speed Max.: 3500 RPMPallet diameter: 1600 mmMax. machining diameter: 2000 mmNumber of claw boxes: 4 pcClamping force per claw box: 55 kNNumber of radial T-slots: 8 Max. speed for turning: 140 min-1Max. speed for milling: 5 min-1Max. torque for turning: 27000 NmMax holding power: 36 kNpositioning speed: 3000 mmAdjustment from center to right: 850 mmShift from center to right (head and tool change): 2750 mmAdjustment from center to left: 850 mmMax feed rate: 2000 mm / minMax rapid traverse speed: 20000 mm / minMax. Feed force: 30 kNcross-section: 280 x 240 mmMax. cutting force when turning: 36 kNMax Spindle Torque: 1200 NmPressure: 6 barAir requirement: 20 m³/h

Ref. -No.: 10359Manufacturer: BRINKMANNYear of construction: 2005Type of control: CNCStorage location: HalberstadtCountry of origin: DeutschlandTool holder type: Sauter Werkzeugrevolver Operating hours: 45000 HoursFurther information:Hinged chip conveyorCoolant cleaning with 2 pumpsCooling system1x jaw chuck without cooling mist exhaust system

Ref. -No.: 10319Manufacturer: TAKANGType of control: Digitalanzeige ACU-RiteControl: KonventionellStorage location: HalberstadtCountry of origin: TaiwanWeight Of The Machine Ca.: 1,3 tSwing diameter over bed: 430 mmBed width: 300 mmTip length: 1500 Centre Height: 215 mmBed length: 1600 mm

Ref. -No.: 10320Manufacturer: TOSType of control: Digitalanzeige - MitutoyoControl: KonventionellStorage location: HalberstadtCountry of origin: TschechienTip length: 1500 Centre Height: 280 mmCentre Distance: 750,1000,15000,2000 mmSpindle Bore: 56 mmSwing diameter over bed: 500 mmNumber of speed levels: 18 Circumferential diameter over the support: 320 mmCircumferential diameter over the bed recess: 560 mmBed length relieved from headstock: 300 mmUniversal chuck diameter: 250 mmDiameter of the clamping disc: 500 mmFurther information:Universal center lathe

Ref. -No.: 10317Manufacturer: NOSOTTIType of control: Digitalanzeige - Mini wizardControl: KonventionellStorage location: HalberstadtCountry of origin: ItalyTip length: 3000 Centre Height: 260 mm

Ref. -No.: 10314Manufacturer: PINACHOYear of construction: 2005Type of control: KonventionellStorage location: HalberstadtCountry of origin: SpainTravel quill: 180 mmTurning Diameter: 630 mmTurning Length: 3000 mmTurning Diameter Over Bed: 620 mmCross Movement. (X-Axis): 365 mmTailstock Quill Diameter: 72 mmTurning diameter over cross slide: 880 mm

Ref. -No.: 10313Manufacturer: MONFORTSYear of construction: 2001Type of control: CNCControl: EUROTURNStorage location: HalberstadtCountry of origin: DeutschlandMachine-No.: 164 01 Machine length: 6200 mmMachine width: 2110 mmMachine Height: 1995 mmWeight Of The Machine Ca.: 7,7 tX stroke: 450 mmZ - stroke: 3850 mmChuck diameter: 315/400/500 mmTurning Diameter: 630 mmTurning Length: 3000 mmCentre Distance: 3985 mmSpindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kNFeed Capacity - X: 11,3 kNRapid Travel Speed X-Axis: 4 m / minRapid Travel Speed Z-Axis: 5 m / minTailstock Quill Diameter: 125 mmTailstock Quill Stroke: 200 mmSpace requirement: 7500 x 3500 mmCircumferential diameter over radial slide: 540 mm mmspindle taper diameter: 140 mmJaw chuck diameter: 400 mmjaw continuity: 102 mmQuills Morse taper: 6 Max swing diameter: 830 mmtravel of the cross slide: 450 mmSpindle head max. pa ...

Ref. -No.: 10294Manufacturer: SCHNEIDER WERKZEUGMASCHINENYear of construction: 1983Type of control: CNCControl: Siemens Sinumerik 840 DStorage location: HalberstadtCountry of origin: DeutschlandMachine-No.: 27.0175 Weight Of The Machine Ca.: 4 tTurret places: 8 PcsTurning Diameter: 595 mmTurning Length: 3000 mmBezel diameter (inside): 240 - 490 mmFurther information:Tool turret, with 8 holders, with chip conveyor, approx. 300 mm wide,Belt filter system Mayfran, 2 bezels, 1 x for diam. up to 240 mm, 1 x for diam. until about 490 mm

Ref. -No.: 10258Manufacturer: SCHAERERType of control: KonventionellStorage location: HalberstadtCountry of origin: GermanyLining: Forkardt F315 BrandMachine length: 3.800 mmMachine width: 1.300 mmMachine Height: 1.500 mmWeight Of The Machine Ca.: 4 tTool holder type: Multifix Typ C Turning Length: 1.800 mmTurning Diameter Over Bed: 520 mmTurning Diameter Over Slide Rest: 320 mmSpindle Bore: 62 mmBezel diameter (inside): 270 mmHole in the jaw chuck: 84 x 120 mm

Ref. -No.: 10257Manufacturer: HEIDENREICH & HARBECKYear of construction: 1981Type of control: KonventionellStorage location: HalberstadtCountry of origin: DeutschlandMachine-No.: 80-0512-0562 Turning Speeds: 20-2000 RPMMachine length: 2.900 mmMachine width: 1.200 mmMachine Height: 1.800 mmWeight Of The Machine Ca.: 3,5 tTool holder type: Multifix Typ B Turning Length: 1.000 mmTurning Diameter Over Bed: 480 mmTurning Diameter Over Slide Rest: 295 mmBezel diameter (inside): 1 x 145, 1 x 255 mm

Ref. -No.: 10229Manufacturer: GÖPPINGERYear of construction: 1953Type of control: KonventionellControl: N/aStorage location: HalberstadtCountry of origin: DeutschlandMachine length: 4700 mmMachine width: 1450 mmMachine Height: 1300 mmWeight Of The Machine Ca.: 3,1 tSupply voltage: 380 VTurning Length: 3000 mmTurning Diameter Over Bed: 530 mmCentre Distance: 3050 mmSwing Diameter Over Bed Slide: 305 mmSpindle Bore: 58 mmTotal Power Requirement: 5,5 kWCirculation in the crank: 720 mm

Ref. -No.: 10154Manufacturer: HEYLIGENSTAEDTYear of construction: 2014Retrofit: 2015Type of control: CNCControl: SINUMERIK 840D solution lineStorage location: HalberstadtCountry of origin: DeutschlandBed width: 2000 mmFeed rate: 1-5000 mm / minTurning Diameter: 2600 mmTurning Length: 10000 mmCentre Distance: 11500 mmFaceplate Diameter: 2000 mmSpindle Speeds: 0,5 - 36 min-1/20 - 140 min-1 RPMMax. Torque: 120 NmMax. Workpiece Weight: 40000 - 70000 kgTotal Power Requirement: 230 kWCross slide shift (X-axis): 640 mmFurther information:

Ref. -No.: 10036Manufacturer: JOHNFORDYear of construction: 2009Type of control: CNCControl: Fanuc Series 18i-TBStorage location: HalberstadtCountry of origin: TaiwanMachine length: 9800 mmMachine width: 3695 mmMachine Height: 5292 mmWeight Of The Machine Ca.: 32,6 tamount of positions: 12 Bar passage: 165 mmSerial no.: TDF9007 Turning Length: 2000 mmTurning Diameter Over Bed: 1550 mmSwing Diameter Over Bed Slide: 1270 mmLongitudinal Travel (Z-Axis): 2000 mmSpindle Head: A2-15 Spindle Diameter In Front Bearing: 240 mmSpindle Bore: 185 mmSpindle power: 37/30 kWCross Travel: 685 mmSpindle Speeds: 1000 RPMRapid Travel Speed X-Axis: 10 m / minRapid Travel Speed Z-Axis: 12 m / minTool changer: 12 Pcs

turning diameter: 330 mmturning length: 140x130 mmcontrol: turning diameter over slide: 140 mmtravel -x axis: 107 mmtravel -z axis: 230 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mmturning length: 508 mmx-axis: 176 mmz-axis: 520 mmcontrol: Fanuc-Series O-TD total power requirement: kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 2,73x1,98x1,64 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 750 mmturning length: 1520 mmcontrol: Fanuc 18 iT-B total power requirement: 22,0 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.