lathes used for sale (3,042)

CNC Swiss Automatic Lathe TRAUB TNL 32 9P With control TX 8 i - p Year of Make: 2016 Spindle bore: 32 mm MAIN SPINDLE Speed range: Max. 6400 rpm C Axis SUB-SPINDLE Speed range: Max. 6000 rpm C Axis TOOL TURRET TOP: Speed range: Max. 12000 rpm 10 speed turret ( All driven ) TOOL TURRET ABOVE: Speed range: Max. 12000 rpm 9 speed turret ( All driven ) REAR UNIT Number of stations: 8 Of which powered: 3 ( T 12 , 13 and 14 ) Speed T12 + T 14 ( 12000 rpm ) Speed T 13 : ( 4000 rpm ) With the following accessories: Full protection cab with interior lighting Various powered tools Various tool holders IEMCA Boss 338 Bar Feeder - HD KSS Pump 20 bar Chip conveyor Operating Instructions

CNC lathe DMG MORI NLX 2000 SY/500 With DMG MORI M730 UM MAPPS CELOS CONTROLLER Year of Make: 2016 Max. workpiece diameter: 366 mm Max. workpiece length: 510 mm Travel in X: 260 mm Travel in Z: 590 mm Travel in Y: +- 50 mm Spindle bore: 65 mm Main spindle speed range: 4000 rpm Speed range sub-spindle: 6000 rpm Speed range of driven tools : 10000 rpm With the following accessories: Workroom door with interior lighting 20-fold turret with 20 driven stations C Axis , Y Axis Touch Probe ( Marposs ) Sub-spindle, parts catcher Tool presetter manual ( HS ) Collet Chuck Hydraulic with Foot Pedal (HS) Collet Chuck Hydraulic with Foot Pedal (GS) Bar Feeder LNS Move S2 30 tool holders Various powered tools Direct displacement measuring system X, Y, Z axis Signal lamp 4 colours Chip conveyor Coolant Setup Operating Instructions

Key data: 350 mm, 700 mm

DMG Mori NLX2500SY/700 Manufactured on 2013 and put into operation on 2014. ZAchse: 700mm, Y-axis 100mm, turning diameter approx. 350mm. Spindle passage 70mm. Operation hours 5353 hours only as new C Axis Y axis B axis 3 Powered Wkz Collets feeder extra included Measuring arm Fully equipped See pictures Immediately available

Turning length: 4000mm, turning diameter over bed: 680mm, turning diameter over short cross slide: 480mm, turning diameter over long cross slide: 420mm, turning diameter in the gap: 880mm, swing diameter in the gap: 960mm, travel cross slide: 480mm, top slide: 230mm, tailstock quill: 280mm, center height over flat bed: 335mm, center height over prism top edge: 313mm, bed width: 560mm, diameter of tailstock quill: 125mm, Morse taper of center: no. 6. With upper support, steady rests, operating manual, digital readout and measuring system, Multifix tool holder. Machine is currently partially overhauled. An on-site inspection is possible.

Key data: 800 mm, 4000 mm, 710 mm

Description, subject to prior sale. Conventional lathe Make: Trens (former TOS Trencin) Digital read-out Swing over bed 710 mm Swing up to 800 mm Distance between centres 4000 mm In good working condition. Machine can be inspected under power in German factory. Availability short-term. Further information, price, videos on request. Technical indications, subject to error.

Lathe Mazak QT10B 1997

Key data: 1500 mm, 4500 mm

Versatile turning/machining center for full-fledged turning and complex drilling and milling. Turning diameter 1500 mm Center width 4500 mm X Travel 1000 mm Y Travel 350 mm Z Travel 5000 mm - 4 Sheet bed machine - Powerful spindle box with backlash-free C-axis - Full-fledged milling in 3 axes (Y-axis = 340 mm) - Direct measuring system in each CNC axis - Infinitely adjustable motor milling spindle - Klaaßen motor milling spindle 37kW/4000 1/min/330 Nm (S1) - Automatic tool change for turning and milling tools - Steady rests and tailstock can be completely driven over - Internal milling head - Grinding support - Extensive range of accessories available The machine has been regularly serviced and is in very good technical condition. There are technical drawings and parts lists for the components and assemblies of the machine. Documentation and technical data ...

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

KERN - Universal lathe CD 480 - Control - Manual Plus -Built in 1994 -1029 operating hours -Prisms / flat guides hardened -Circulation / turning diameter over bed 475mm -Circulation/turning diameter via face slide 260mm -Slide path / plan 260mm -Turning length 1500mm -Spindle passage 78mm -Speed range (V-constant) 1-3000 rpm -Feed range / plan 0.001-1000 mm/rev -Feed range / longitudinal 0.001-2000 mm/rev -Rapid traverse / plan / longitudinal 5/10 m/min -Tailstock MK 5 - 120mm quill path -Multifix with insert -Röhm - Three-jaw chuck 250mm -Automatic central lubrication -Coolant device -Complete machine documentation Dimensions: LxWxH 3.5x1.4x1.8 meters / Weight: 3000 kg

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis LxWxH 2.4x1x1.7 meters / Weight 1600Kg

Key data: 32 mm, 32 mm, 330 mm

CNC Longitudinal Lathe Brand: Star Machine type : SR 32 / 330 Year of manufacture : 1997 Control : - FANUC 16 TCNC Control Location : Hultsfred warehouse Sweden Availability : direct from stock Technical data Max. rod diameter: 32 \[mm\] Main spindle stroke: 310 \[mm\] Main spindle stroke with driven taper: 295 \[mm\] Spindle Power: 7.5 \[kw\] Main spindle speed : 350 – 7000 \[rpm\] C axis on main spindle Number of Turning Tool Holders: 6 Number of powered tool holders: 4 Driven Tools Speed: 350-5000 \[rpm\] Number of tool holders on the combi device: 4 maxi diameter in pick-up spindle: 32 \[mm\] Spindle speed counter spindle : 350-7000 \[rpm\] Power sub-spindle: 3.7 \[kw\] Indexing C-axis sub-spindle: 1° Pick-up spindle stroke: 125 \[mm\] Electrical connected load. : Power: 20 \[kW\] Dimensions: 1700 x 2515 x 1700 \[mm\] W ...

Conventional Meuser KM 2 engine lathe with lead screw and feed rod. Center height X/Y approx. 230mm/460mm, spindle bore: 62mm, speed range: 25-1600rpm, thread cutting: Meuser universal gearbox. Inspection by appointment possible.

A Meuser manual engine lathe including various holders, 3-jaw chuck and center punch is available.

Turning diameter over bed/face slide: 560mm/370mm, turning length: 2000mm, spindle bore: 90mm, speed: 1800rpm, dimensions X/Y/Z: approx. 3800mm/1700mm/2100mm, weight: approx. 3300kg, control: Bosch CNC Alpha 2000/2, operating hours: 60000. Including various holders, 3- and 4-jaw chucks.

Offered is a Traub TND 400. Center distance: 800mm, turning diameter approx. 250mm, travel X/Y approx. 220mm/850mm, spindle bore: 65mm, speed range: 40-4000rpm, 12-position disc turret, tool holder: VDI40 DIN69880, integrated coolant system, dimensions X/Y/Z approx. 3000mm/2000mm/2000mm, weight approx. 4300kg-4500kg. Inspection by appointment possible.

Spindle bore: 42 mm Circumferential diameter over bed: 330 mm Multifix holder Tailstock with an MK3 lining Speed: 1-4500 1/min

Spindle bore: 42 mm Circumferential diameter over bed: 330 mm Multifix holder Tailstock with an MK3 lining Speed: 1-4500 1/min

Key data: 65 mm, 660 mm

Control: SIEMENS Spindle passage: 65 mm Max. speed: 6,000 1/min Sub-spindle Z= 700 mm TOOL CARRIER 1 with milling spindle Milling spindle: 7,200 1/min B-axis 360° 14 stations with powered tools Speed Tools 7,200 1/min Travel: X= 230 / Y= +- 65 / Z= 845 TOOL CARRIER 2 14 stations with powered tools Speed Tools 7,200 1/min Travel: X= 140 / Y= +- 45 / Z= 810 Chip conveyor Filter Bar feeder INDEX MBL

This 12s Index MS42C was manufactured in 1998. It features a maximum bar diameter of 42 mm and operates with a fully automatic system, making it suitable for high-volume precision turned parts. The machine is equipped with a Siemens SINUMERIK 840C control system and AC servo drives, ensuring efficient performance. Consider the opportunity to buy this Index MS42C automation equipment. Contact us for further details.

A barely used cycle-controlled flatbed lathe Wagner with extensive accessories is available. Swing diameter over bed/face slide: 500mm/280mm, distance between centers: 1500mm, bed width: 350mm, speed: 3000rpm, travel X/Z: 295mm/1435mm, rapid traverse: 5m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm, quill diameter: 75mm, quill stroke: 150mm, quill taper: MK5, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1700mm, weight: approx. 3000kg, control: Siemens Sinumerik 802C base line, operating hours: approx. 1702h. Including various tools, coolant system, tool holders, 3-jaw chuck and several Parat tool holders. Documentation available. An on-site inspection is possible.

Datenblatt / Datasheet: Control: OSP P200-M Travels X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degree] 1; 360 degree incrementing Tool Changer 200 ATC MAS BT50 Tool slots: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet pool 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Further features: – Renishaw Sample – Renishaw Tool Break Control – Mayfran Concept with high-pressure pump In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both ele ...

The Okuma MA series is a horizontal machining center with long travel distances for heavy-duty machining. The travels X/Y/X 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm -OSP P200M -BJ 2008 -Cuttng Time 17,500 h -Renishaw Tool Eye -ATC 150 SK50 -2 pallet system -Spindle speed 6000 RPM -B-axis NCB 0.001 degrees -X/Y/Z 1000/900/1000 mm -Mayfran Consept coolant system with chip conveyor & high pressure pump 60 bar In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of  ...

Okuma Macturn 30 1SW 1000, BJ 1999, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 Bar, gear milling option, approx. 12500 spindle hours, HS Big Bore, GS Standard Bore, good condition In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Delivery: free loading truck 100% payment before loading upon invoicing. All information is non-binding, we expressly reserve the right to make errors and prior sales. The sale is made under exclusion of any warranty claims. The goods remain the prop ...

Okuma Multus B300-W 6 Axis Lathe-Milling Machine Ffebm Noyg Rf Njrbw Tju -Okuma OSP P200L -BJ 2008 -Cutting Time 10,500 h -H1 milling spindle 6000 rpm -Main spindle 3800 rpm, Rota NC 315-86 -Sub-spindle 5000 rpm -ATC 60 System HSKA-63 (60 Tools) -Geometry very good -Marpos Tool Sensor Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, a visit to our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Delivery: free loading truck 100% payment before loading upon invoicing. All information is non-binding, w ...

A vertical large-format carousel turning machine TOS is available. Turning diameter cross rail support/side support: 1150mm/1000mm, max. workpiece weight: 3000kg, max. workpiece height: 900mm, travel X/Y/Z: 500mm/500mm/750mm, rotary table diameter: 1000mm, max. rotary table torque: approx. 8800Nm. Machine dimensions X/Y/Z: approx. 4100mm/3400mm/3100mm, weight: approx. 13500kg. Documentation available. An on-site inspection is possible.

Details Built in 1960 Type KW180 Accessories Multifix Steel Holder Collet chuck including sleeves Vises in the pictures are not included The Martin lathe from 1960 is characterized by its solid construction and high precision. It is ideal for a wide range of filming tasks and offers a high degree of flexibility thanks to its extensive range of accessories. It is ideal for workshops and manufacturing plants that value quality and reliability. The KW180 lathe is robust and durable. It was built in 1960 and is in good condition despite its age. The lathe comes with a wide range of accessories. This includes a Multifix steel holder, which enables quick and easy tool changes. A collet chuck including sleeves is also part of the accessories and expands the possibilities of the machine. Please note that the vices shown in the pictures are not included in the ...

CNC lathe Okuma LU 3000 EX-M 2PC-600 Control: OSP-P300L Year of Make: 2017 Turning length: 600 mm Turning diameter: 340 mm Swivel diameter over bed: 580 mm Speed: 50 - 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (all places driven) B-turret: 8 tool positions Equipment / Accessories: - Chip conveyors - One Touch IGF - Tool monitoring system - Tool measuring device - Reinforced coolant pump 8 bar - 3- Baking Chuck Kitagawa B208

CNC lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of Make: 2017 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret: V12 (all places driven) Equipment: - Chip conveyors - Touchsetter - 3-jaw chuck - Tailstock

turning diameter: 150 mmturning length: 1250 mmcontrol: OSP 7000 L total power requirement: 37 kWweight of the machine ca.: 8500 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 2004 Dismantling and removal by buyers Dismantling also possibl ...