We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (18)
- Automatics (Lathes) For Bars (5)
- Bench Lathes For Precision Mechanics (6)
- Carousel Turning Machines (Lathes) (55)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (41)
- CNC Cycle Turning Machines (40)
- CNC Double Spindel Turning Maschines (Lathes) (16)
- CNC Long Turning Automatics (30)
- CNC Long Turning Machines (31)
- CNC Multiple Spindel Turning Lathes (10)
- CNC Sloping Beds (2)
- CNC Turning Automatics (27)
- CNC Turning Centers (246)
- CNC Turning Machines (549)
- Cutting-Off Machines (8)
- Cycle Lathes (36)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (252)
- Facing Disks (1)
- Facing Lathes (9)
- Facing Lathes With Tailstock (1)
- Feed Automatics (1)
- Heavy Lathes (37)
- High Precision Lathes (6)
- High Precision Turning Machines (Lathes) (7)
- Hollow Spindle Turning Machines (Lathes) (5)
- Horizontal Turning Centres (14)
- Horizontal Turning Machines (Lathes) (4)
- Longitudinal Turning Machines (Lathes) (6)
- Lunettes (16)
- Multi Spindle Automatics For Bars (27)
- Multi Spindle Chucking Automatics (1)
- Multi-spindle turn automatics (31)
- NC Universal Turning Machines (Lathes) (2)
- Other Turning Machines (21)
- Pointed Turning Automatics (Lathes) (3)
- Ride-Along Lunettes (1)
- Rotating Benches (13)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (8)
- Sloping Bed Turning Machines (Lathes) (1)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (3)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (17)
- Turning Automatics For Bars With Counter-Spindle (1)
- Turning Benches (2)
- Turning Machines (Lathes) (93)
- Turning Machines (Lathes) And Turning Automatics (2)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (7)
- Universal Lathes > 800 Mm Diameter (9)
- Universal Lathes Up To 800 Mm Diameter (8)
- Universal Turning Machines (Lathes) (24)
- Vertical Turning Centres (2)
- Vertical Turning Machines (34)
- Vertical Turning Machines, Open Gap And Straight-Sided (1)
- Vertikal Turning Machines (Lathes) (42)
- Whirling And Thread Whirling Machines (1)
- more
- abb (3)
- ACCUWAY (4)
- AI HEMBRUG (1)
- AJAX (1)
- ALEX TECH (2)
- ALEX TECH VIPER (1)
- AMUTIO-CAZENEUVE (1)
- ANTONIO ANSELMI (1)
- ARAD (1)
- ARGUS - FLOWSERVE (1)
- AVIA (1)
- AYEL-TECH (2)
- BAUER (2)
- Benzinger (5)
- BERG (1)
- Bernardo (21)
- BERTHIEZ (3)
- BIGLIA (18)
- BISON (1)
- Blansko (2)
- BOEHRINGER (23)
- BOEHRINGER-VDF (1)
- BOERINGER (1)
- BOLEY (4)
- BRAUN ZERBST (1)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUFFALO CHALLENGER (1)
- BULMAG (1)
- Bulmak (2)
- BÖHRINGER (3)
- CAORLE (1)
- CARNAGHI (1)
- CARNAGHI PIETRO (1)
- CAZENEUVE (29)
- CAZENUEVE (1)
- Celoria (2)
- CERUTI (1)
- CHALLENGER (3)
- Chevalier (2)
- CHIAH CHYUN (1)
- CHIAH CHYUN MUELLER (1)
- CHIRON (1)
- CHUN ZU (1)
- CITIZEN (19)
- CKD (1)
- CKD BLANSKO (2)
- CKD-BLANSKO (2)
- CLOVIS (1)
- CMT (3)
- CMT MASCHINENBAU (1)
- CMZ (6)
- Colchester (37)
- COLCHESTER 600 (1)
- COLCHESTER HARRISON (1)
- COLOMBO (2)
- COMEC (1)
- Contur (2)
- CORMAK (1)
- CRAWFORD SWIFT (2)
- CS (1)
- CZ.TECH (1)
- D (1)
- DAEWOO (8)
- DAEWOO (DOOSAN) (2)
- DAINICHI (1)
- DEMOOR (2)
- DIEDESHEIM (1)
- DINN SPINNING LATHE (1)
- DIVERS (1)
- DMG (20)
- DMG GILDEMEISTER (21)
- DMG GILDEMISTER (1)
- DMG MORI (60)
- DMG Mori Seiki (2)
- DMG MORI SEKI (1)
- DMG MORI WASINO (1)
- DMG-MORI (1)
- DMT (2)
- DMT / KERN (1)
- DMT KERN (1)
- DMTG (1)
- DN SOLUTIONS (11)
- Doerries Scharmann (2)
- DOOSAN (61)
- DOOSAN DAEWOO (5)
- DOOSAN PUMA (2)
- DOOSAN, MIRCRO, ETC. (1)
- DOOSAN-PUMA (1)
- DORMAC (1)
- DORRIES (1)
- DORRIES. (1)
- DREHMA (1)
- DS DORRIES SCHARMANN (1)
- DUGARD (1)
- DÖRRIES (10)
- DÖRRIES SCHARMANN (1)
- DÖRRIES-SCHARMANN (2)
- E/D/E, WUPPERTAL (1)
- EBOSA (2)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 102)
abb 3
ACCUWAY 4
AJAX 1
ARAD 1
AVIA 1
BAUER 2
BERG 1
Bernardo 21
BERTHIEZ 3
BIGLIA 18
BISON 1
Blansko 2
BOEHRINGER 23
BOLEY 4
BULMAG 1
Bulmak 2
CAORLE 1
CARNAGHI 1
CAZENEUVE 29
Celoria 2
CERUTI 1
CHIRON 1
CHUN ZU 1
CITIZEN 19
CKD 1
CLOVIS 1
CMT 3
CMZ 6
Colchester 37
COLOMBO 2
COMEC 1
Contur 2
CORMAK 1
CS 1
CZ.TECH 1
D 1
DAEWOO 8
DAINICHI 1
DEMOOR 2
DIVERS 1
DMG 20
DMG MORI 60
DMG-MORI 1
DMT 2
DMT KERN 1
DMTG 1
DN SOLUTIONS 11
DOOSAN 61
DORMAC 1
DORRIES 1
DORRIES. 1
DREHMA 1
DUGARD 1
DÖRRIES 10
EBOSA 2
ECHEA 1
ECOCA 1
EGURO 1
ELMAG 3
EMAG 33
Emco 43
Ergomat 5
ESCO 1
EUBAMA 1
EXCELLO 1
FALCON 1
FAMAR 6
FANUC 2
FARREL 1
FAT 3
FEELER 2
Feinbau 3
FMB 1
Forkardt 2
FORMAT 1
FRORIEP 2
GALLIC 1
GDW 4
GEMA 2
GEMINIS 12
Gildemeister 123
Goodway 9
Graziano 3
GURUPTZE 1
GURUTZPE 9
Guss 2
GWM-TECH 2
HAAS 32
HANKOOK 4
HANWHA 8
HAPREMEC 1
HARDINGE 11
HARDINGS 1
Harrison 7
HBM 9
HEID 1
HERKULES 2
HESSAPP 3
HITACHI 1
HNK 1
HOESCH 1
HOFFMAN 1
HUNGER 1
HURCO 9
HUVEMA 10
HWACHEON 11
Hyundai 19
HYUNDAI WIA 10
ICOCA 1
IEMCA 2
IMT 1
INDEX 68
INNSE 2
IRLE 1
JENN-WEI 1
JESSEY 6
JMTCL 1
JOHNFORD 4
KAMI 5
Kern 6
KERN-DMT 1
KIA 1
Kitagawa 2
KITAMURA 2
KLAASSEN 2
Klaaßen 3
Klopfer 2
KME 1
KMT 1
KNUTH 8
KOLOMNA 9
Kovosvit 4
LABOR 2
LACFER 2
LATHES 1
LEADWELL 6
LEALDE 1
LEIFELD 1
Leinen 2
LIEBER 1
LORCH 1
LÖW 2
M+M 1
MACMATIC 1
MAE 1
MAIER 2
MAMMUT 1
MANURHIN 5
MARTIN 8
MAS 11
MATEC 1
MATRA 5
Mazak 126
MCM 4
MERLI 1
METOSA 1
MEUSER 15
Mexpol 3
MFD 2
MICROCUT 2
MIOTAL 4
MISAL 1
MIYANO 10
MNT 1
approved
dealer
dealer
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 210 mm-Inside: Ø 76 mm-Take: short taper 6, cone Ø 105 mm-Dimension: Ø 210 x 65 mm-Weight: 3.5 kg
approved
dealer
dealer
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 30-39 mm-Type designation: not available-Dimensions total Ø 180 x 75 mm-Weight: 5.9 kg
approved
dealer
dealer
Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe-Manufacturer: WMW, automatic lathe type DRT 50m-Turning length: 550 mm-Turning Ø over bed: 530 mm-Spindle bore: Ø 63 mm-Spindle speeds: 9 - 450 rpm-Three jaw chuck: Ø 200 mm-Turret: with accessories, see photos-Drive motor: 5.3 / 6.8 kW-Dimensions: 2420/1040 / H1460 mm-Weight: 2200 kg
approved
dealer
dealer
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 50-60 mm-Type designation: not available-Dimensions total Ø 180 x 90 mm-Weight: 8 kg
approved
dealer
dealer
Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg
approved
dealer
dealer
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 213 mm-Mounting: Hole shaft cone Ø 56-59 mm-Type designation: not available-Dimensions total Ø 260 x 120 mm-Weight: 14.3 kg
approved
dealer
dealer
spindle head for lathe, lathe spindle head, lathe spindle head-Manufacturer: Scherer, spindle head from vertical lathe VDZ 80-Clamping head: Hainbuch SK80BZIG SP.0219.0034.00-Clamping device: SMW Autoblok Cil.85 SIN-S no-cc-Individual components: see photos-Price/Delivery: complete-Dimensions: 1350/560/H495 mm-Weight: 330 kg
approved
dealer
dealer
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 49-64 mm-Type designation: not available-Dimensions total Ø 210 x 125 mm-Weight: 10.9 kg
approved
dealer
dealer
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 163 mm-Mounting: Hole shaft cone Ø 44-54 mm-Type designation: not available-Dimensions total Ø 220 x 85 mm-Weight: 8 kg
approved
dealer
dealer
Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 210 mm-Inside: Ø 50 mm-Take: cone Ø 138 mm/short cone 8-Dimension: Ø 210 x 85 mm-Weight: 5 kg
approved
dealer
dealer
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 213 mm-Mounting: Hole shaft cone Ø 44-54 mm-Type designation: not available-Dimensions total Ø 230 x 85 mm-Weight: 10.3 kg
approved
dealer
dealer
Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 280 mm-Inside: Ø 105 mm-Take: cone Ø 138 mm/short cone 8-Dimension: Ø 280 x 35 mm-Weight: 13 kg
approved
dealer
dealer
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 260 mm -Adapter: short cone size 6 (Ø103-105 mm) -Bolt circle: Ø 133 mm -Dimensions: Ø 260 x 140 mm -Weight: 11.2 kg
approved
dealer
dealer
Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Hole circle: Ø 105 x 10 mm / Ø 62 mm M10 -Passage: Ø 41 mm -Dimensions: Ø 162 x 48 mm -Weight: 4.7 kg
approved
dealer
dealer
Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm -Weight: 19 kg
approved
dealer
dealer
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 225 mm -Mounting: cone Ø100-102 mm -Bolt circle: Ø 140 mm -Dimensions: Ø 225 x 165 mm -Weight: 8.1 kg
approved
dealer
dealer
Tool changer for lathe, upper support, upper slide, dovetail guide -with four tool holders -Dimension: see photos -Dimensions: 400/260/H200 mm -Weight: 25.2 kg
approved
dealer
dealer
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 160 mm -Hole: Short cone 4, cone Ø 60 - 63 mm -Bolt circle: Ø 85 mm -Dimensions: Ø 160 x 70 mm -Weight: 2.6 kg
approved
dealer
dealer
Counter support, counter bearing, bearing block, pillow block, bearing for milling machine, milling machine horizontal -Manufacturer: WMW, counter bearing from milling machine FW 400 x 1600 -Dimensions: see drawing in the photos -Transport dimensions: 1505/400/H345 mm -Weight: 370 kg
approved
dealer
dealer
Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck -Outside: Ø 280 mm -Inside: Ø 105 mm -Mounting: Short taper 8 (139.7 mm) -Weight: 13 kg
approved
dealer
dealer
Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Chuck flange: for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Passage: Ø 44 mm -Bolt circle: Ø 105 mm -Mounting: cone Ø 79-82 mm -Dimensions total Ø 205 x 160 mm -Weight: 6.3 kg
approved
dealer
dealer
Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 250 mm -Inner diameter: 65 mm -Socket: Cone Ø 103 mm -Bolt circle: Ø 133 mm -Bolt circle: Ø 235/13 mm -Dimensions: Ø 250 x 100 mm -Weight: 13 kg
approved
dealer
dealer
Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine, milling machine-horizontal -Manufacturer: WMW, counter bearing from milling machine -Dimensions: see drawing in the photos -Dimensions: 295/76/H125 mm -Weight: 6.5 kg
approved
dealer
dealer
Guide track, guides, tool slide, cross table, cross slide, bed guide track, machine bed-Guide track: from Meuselwitz lathe-Measures: see drawing in the photos-Dimensions: 780/355 / H390 mm-Weight: 135 kg
approved
dealer
dealer
Tool changer for lathe, tool disk turret, top support, top slide, dovetail guide -for: max. 6 tools -Changer comes from a Gildemeister CNC lathe type: NEF 560 - Tip height: 105 mm -Turning chisel holders: 25 x 25 x 100 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 315/315 / H380 mm -Weight: 87 kg
approved
dealer
dealer
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Knuth, lead screw and feed screw lathe type PICATOR 215/1250 -Machine bed: hardened -Turning length: 1260 mm -Turning diameter over bed: 470 mm -Spindle diameter without bridge bed: 600 mm -Turning diameter over support: 280 mm -Spindle bore: Ø 55 mm Spindle speeds: 36 - 2000 rpm -Wedge bar chuck: Forkardt Ø 200 mm -Tailstock mount: MK4 -Drive: 3.6 kW -Dimensions: 1020/2210/H1190 mm -Weight: 1200 kg
approved
dealer
dealer
Three-jaw chucks, three-jaw lathe chucks, power chucks-Chuck size: Ø 160 mm-6 set: clamping jaws-Weight: 17.5 kg
approved
dealer
dealer
Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions
approved
dealer
dealer
Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible.
approved
dealer
dealer
An old Martin automatic lathe is available. Center height: 355mm, turning diameter over bed/slide: 720mm/515mm, faceplate diameter: 710mm, three-jaw chuck diameter range: 250mm-500mm, crank: 980mm, swing diameter: 1030mm, bed width: 530mm, speed: 1400rpm, quill diameter: 1150mm, max. quill travel: 280mm, max. workpiece weight: approx. 4000kg, weight: approx. 4900kg. Documentation available. An on-site inspection is possible.
