We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (15)
- Automatics (Lathes) For Bars (6)
- Bench Lathes For Precision Mechanics (7)
- Carousel Turning Machines (Lathes) (55)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (39)
- CNC Cycle Turning Machines (44)
- CNC Double Spindel Turning Maschines (Lathes) (16)
- CNC Long Turning Automatics (19)
- CNC Long Turning Machines (17)
- CNC Multiple Spindel Turning Lathes (11)
- CNC Sloping Beds (1)
- CNC Turning Automatics (24)
- CNC Turning Centers (203)
- CNC Turning Machines (495)
- Cutting-Off Machines (8)
- Cycle Lathes (42)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (267)
- Facing Disks (1)
- Facing Lathes (10)
- Facing Lathes With Tailstock (1)
- Feed Automatics (2)
- Heavy Lathes (36)
- High Precision Lathes (9)
- High Precision Turning Machines (Lathes) (6)
- High Speed Lathes (1)
- Hollow Spindle Turning Machines (Lathes) (2)
- Horizontal Turning Centres (1)
- Horizontal Turning Machines (Lathes) (5)
- Longitudinal Turning Machines (Lathes) (4)
- Lunettes (19)
- Multi Spindle Automatics For Bars (27)
- Multi Spindle Chucking Automatics (1)
- Multi-spindle turn automatics (24)
- NC Universal Turning Machines (Lathes) (2)
- Other Turning Machines (13)
- Pointed Turning Automatics (Lathes) (4)
- Ride-Along Lunettes (1)
- Rotating Benches (14)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (7)
- Sloping Bed Turning Machines (Lathes) (1)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (2)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (17)
- Turning Automatics For Bars With Counter-Spindle (1)
- Turning Benches (2)
- Turning Machines (Lathes) (97)
- Turning Machines (Lathes) And Turning Automatics (2)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (4)
- Universal Lathes > 800 Mm Diameter (11)
- Universal Lathes Up To 800 Mm Diameter (7)
- Universal Turning Machines (Lathes) (22)
- Vertical Turning Centres (1)
- Vertical Turning Machines (33)
- Vertikal Turning Machines (Lathes) (32)
- Whirling And Thread Whirling Machines (1)
- more
- abb (3)
- ACCUWAY (4)
- AFM (1)
- AI HEMBRUG (1)
- AJAX (1)
- ALEX TECH (2)
- ALEX TECH VIPER (1)
- Alzmetall (2)
- AMADA (1)
- AMUTIO-CAZENEUVE (1)
- Angelini (3)
- ANTONIO ANSELMI (1)
- ARAD (1)
- ARGUS - FLOWSERVE (1)
- AXA (1)
- AYEL-TECH (2)
- BAUER (2)
- BECHLER (1)
- Benzinger (9)
- BERG (1)
- Bernardo (21)
- BERTHIEZ (4)
- BIGLIA (25)
- BISON (1)
- Blansko (2)
- BOEHRINGER (27)
- BOEHRINGER-VDF (1)
- BOLEY (4)
- BRAUN ZERBST (1)
- BREUNING-IRCO (1)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUFFALO (1)
- BUFFALO CHALLENGER (1)
- BULMAG (1)
- Bulmak (2)
- BÖHRINGER (4)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (26)
- CAZENUEVE (1)
- CELLRO (1)
- Celoria (2)
- CERUTI (1)
- CHALLENGER (2)
- Chevalier (2)
- CHIAH CHYUN MUELLER (1)
- Chiron (3)
- CHUN ZU (1)
- CITIZEN (25)
- CITIZEN MACHINERY (1)
- CKD (1)
- CKD BLANSKO (1)
- CKD-BLANSKO (2)
- CLOVIS (1)
- CMT (4)
- CMT MASCHINENBAU (1)
- CMZ (6)
- CNC MORI SEIKI (1)
- CNC PROFI (1)
- Colchester (37)
- COLOMBO (2)
- COMEC (1)
- COMEV (1)
- Contur (2)
- CONTUR SAEILO (1)
- CRAWFORD SWIFT (2)
- CS (1)
- CZ.TECH (1)
- D (1)
- DAEWOO (8)
- DAEWOO (DOOSAN) (2)
- DAINICHI (1)
- DECKEL MAHO (1)
- DEMOOR (2)
- DIEDESHEIM (1)
- DINN SPINNING LATHE (1)
- DIVERS (1)
- DMG (31)
- DMG GILDEMEISTER (17)
- DMG GILDEMISTER (1)
- DMG MORI (51)
- DMG Mori Seiki (3)
- DMG MORI WASINO (1)
- DMG-GILDEMEISTER (1)
- DMG-MORI (1)
- DMT (1)
- DMT / KERN (1)
- DMTG (1)
- DN SOLUTIONS (7)
- Doerries Scharmann (2)
- DOOSAN (68)
- DOOSAN DAEWOO (1)
- DOOSAN PUMA (2)
- DOOSAN, MIRCRO, ETC. (1)
- DOOSAN-DAEWOO (1)
- DOOSAN-PUMA (1)
- DORMAC (1)
- DORRIES (1)
- DORRIES. (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 102)
abb 3
ACCUWAY 4
AFM 1
AJAX 1
AMADA 1
Angelini 3
ARAD 1
AXA 1
BAUER 2
BECHLER 1
BERG 1
Bernardo 21
BERTHIEZ 4
BIGLIA 25
BISON 1
Blansko 2
BOEHRINGER 27
BOLEY 4
BUFFALO 1
BULMAG 1
Bulmak 2
CAORLE 1
CARNAGHI 1
CAZENEUVE 26
CELLRO 1
Celoria 2
CERUTI 1
Chiron 3
CHUN ZU 1
CITIZEN 25
CKD 1
CLOVIS 1
CMT 4
CMZ 6
Colchester 37
COLOMBO 2
COMEC 1
COMEV 1
Contur 2
CS 1
CZ.TECH 1
D 1
DAEWOO 8
DAINICHI 1
DEMOOR 2
DIVERS 1
DMG 31
DMG MORI 51
DMG-MORI 1
DMT 1
DMTG 1
DOOSAN 68
DORMAC 1
DORRIES 1
DORRIES. 1
DREHMA 1
DUGARD 1
DÖRRIES 12
EBOSA 2
ECHEA 1
ECOCA 1
EGURO 1
ELMAG 2
EMAG 42
Emco 51
Ergomat 7
ESCO 1
EXCELLO 1
FALCON 1
FAMAR 6
FANUC 2
FARREL 1
FAT 1
FEELER 4
Feinbau 5
FMB 2
FOCUS 1
Forkardt 2
FORMAT 1
FREMTAS 1
FRORIEP 4
GALLIC 1
GDW 1
GEMA 2
GEMINIS 11
Gildemeister 125
Goodway 6
Graziano 3
GURUPTZE 1
GURUTZPE 7
Guss 2
GWM-TECH 2
HAAS 35
HANKOOK 4
HANWHA 9
HAPREMEC 1
Hardinge 9
Harrison 7
HBM 9
HEID 1
HERKULES 2
HERMLE 1
HESSAPP 4
HNK 1
HOESCH 1
HOFFMAN 1
HOFMANN 1
HUNGER 1
HURCO 5
HUVEMA 11
HWACHEON 11
Hyundai 9
ICOCA 1
IEMCA 2
IMATEC 1
IMT 1
INDEX 82
INNSE 2
IRLE 1
JESSEY 8
JET 1
JMTCL 1
JOHNFORD 5
JUNG 1
KAMI 5
Kern 5
KERN-DMT 1
KEYENCE 5
KIA 1
Kitagawa 2
KITAMURA 1
KLAASSEN 1
Klaaßen 2
Klopfer 2
KME 1
KMT 1
KNUTH 6
KOLOMNA 9
Kovosvit 4
LACFER 2
LANG 1
LATHES 1
LEADWELL 3
LEALDE 1
LEIFELD 1
Leinen 3
Lieber 2
LNS 5
LORCH 1
LÖW 2
M+M 1
MAE 1
MAIER 3
MAMMUT 1
MANURHIN 5
MARTIN 8
MAS 10
MATRA 4
MAYFRAN 1
Mazak 105
MCM 4
MERLI 1
approved
dealer
dealer
Inv. Num. : 8618 Type: FTC 350 XLS Producer: FEELER Created: 2014 Parameters: Control System: FANUC Series Oi-TD Switch-on hours: 9330 h Hours: 7081 h Maximum turning length: 870 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 630 mm Number of Spindles: 2 pieces Maximum spindle speed: 4500 1/min Equipment: Chuck
approved
dealer
dealer
Inv. Num. : 8570 Type: SU 50 A/2000 Producer: TOS Generated: Parameters: Maximum turning length: 2000 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter via support: 250 mm Weight: 3260 kg Equipment: Digital measurement
Control Fanuc ... 18i-TB Turning diameter ... 20mm Turning length ... 165mm Y axis Sub-spindle Spindle bore ... 31mm Powered tools Bar Feeder Spindle speed ... 0-8000 rpm. Total power requirement ... 6kVA Machine weight ... 2550kg L x W x H ... 2200x1200x2000mm
approved
dealer
dealer
Inv. Num. : 8559 Type: WDR 1000 CNC Producer: Wagner Created: 2011 Parameters: Control system: Siemens 840D Maximum turning length: 5000 mm Maximum turning diameter over bed: 750 mm Maximum turning diameter over support: 666 mm
approved
dealer
dealer
Inv. Num. : 8552 Type: TMM-250 M1 Producer: Takisawa Created: 2005 Parameters: Control system: FANUC 180i Max. turning diameter: 350 mm Maximum spindle speed: 4000 1/min Bar diameter: 50.8/76.2 mm Length: 4745 mm Width: 2932 mm Height: 2250 mm Weight: 8500 kg Equipment: 2 spindles and 2 heads with driven tools
approved
dealer
dealer
Inv. Num. : 8549 Type: Cutex-160B MC Producer: Hwacheon Created: 2017 Parameters: Control system: FANUC 0i-SERIES (TF) Max. turning diameter: 260 mm Maximum turning diameter over bed: 550 mm Maximum spindle speed: 4500 1/min Lathe chuck diameter: 200 mm Weight: 3280 kg
approved
dealer
dealer
Inv. Num. : 8535 Type: TNL 18P Producer: TRAUB Created: 2013 Parameters: Control system: TRAUB SYSTEM TX 8i-p Max. rod diameter: 20 mm Maximum turning length: 180 mm Number of Spindles: 2 pieces Maximum spindle speed: 8000 1/min Length: 2500 mm Width: 1460 mm Height: 2250 mm Weight: 4000 kg Equipment: Bar Feeder
approved
dealer
dealer
The machine is in good technical condition, inspection and trial operation is possible by prior arrangement
approved
dealer
dealer
The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg
approved
dealer
dealer
The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm
approved
dealer
dealer
The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.
approved
dealer
dealer
The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...
approved
dealer
dealer
"The machine is in good technical condition, a test run is possible by prior arrangement."
approved
dealer
dealer
Inv. Num. : 8473 Type: AS14 Producer: Tornos Generated: Parameters: Max. rod diameter: 14 mm Maximum turning length: 3000 mm Number of spindles: 6 pieces Maximum main spindle power: 7.5 kW Maximum spindle speed: 6000 1/min Length: 2150 mm Width: 820 mm Height: 1466 mm Weight: 2500 kg
approved
dealer
dealer
Inv. Num. : 5411 Type: SK 12 Producer: TOS Created: 1961 Parameters: Table diameter: 1200 mm Max. turning diameter: 1300 mm Maximum workpiece weight: 4 t Max. workpiece height: 1000 mm Weight: 18.3 t
Circumferential diameter over bed ... 500mm Turning length ... 2000mm Max. workpiece weight ... 300kg Circumferential diameter via support ... 270mm Spindle bore ... 52mm Spindle speed ... 22-2000 rpm Main engine power ... 5.5kW L x W x H ... 3640x1100x1580mm Machine weight ... 1940kg The machine is in good condition, possible to test under power.
Control Fanuc Turning diameter ... 380mm Axis X ... 151mm Axis Z ... 339mm Circumferential diameter via support ... 290mm Spindle speed ... 20-6000 rpm. Machine weight ... 4200kg Main engine power ... 7.5kW L x W x H ... 2885/3865x1720x1670mm The machine is in good condition, possible to test under power.
Control Siemens ... Sinumerik 840 D Max.workpiece diameter ... 3200mm Turntable diameter ... 3000mm Max.table load... 14000kg Max. workpiece height ... 2200mm Axis Z ... 1155mm Max. workpiece weight ... 14000 kg Main engine power ... 81 kW Floor space... DXŠXV 7200x6400x6600mm The machine is in very good condition,
approved
dealer
dealer
Inv. Num. : 8329 Type: KMX 413 Producer: MANURHIN Created: 2018 Parameters: Control system: FANUC Hours: 9473 h Max. rod diameter: 16 mm Number of axles: 4 plus 2 pieces Maximum spindle speed: 12000 1/min Spindle bore: 19 mm Spindle stroke: 130 mm Equipment: Collets Bar Feeder Spindle adjustment for 16 mm rod without adjusting the rod end
approved
dealer
dealer
Inv. Num. : 8328 Type: KMX 732 evo Producer: MANURHIN Created: 2013 Parameters: Control system: FANUC Operating hours: 20723 h Max. rod diameter: 32 mm Number of Spindles: 7 plus 2 pieces Maximum spindle speed: 10000 1/min Spindle bore: 37 mm Spindle stroke: 410 mm Weight: 4500 kg Equipment: Collets Bar Feeder Ducts (21 and 13 mm) Telescopic reduction inserts (inner diameter 21 and 13 mm)
approved
dealer
dealer
Inv. Num. : 8314 Type: 42 BNA DHY Producer: Miyano Created: 2011 Parameters: Max. turning length: 235 mm Max. turning diameter: 80 mm Maximum spindle speed: 6000 1/min Max. rod diameter: 42 mm Weight: 3900 kg Equipment: IEMCA Bar Feeder
approved
dealer
dealer
Inv. Num. : 8240 Type: KNC 32 Producer: STAR Created: 1990 Parameters: Control System: Fanuc Series O-TT Maximum turning length: 310 mm Max. turning diameter: 32 mm Maximum main spindle power: 8 kW Maximum spindle speed: 6000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 4000 kg
approved
dealer
dealer
Inv. Num. : 8232 Type: Twin 42 Producer: Gildemeister Created: 2002 Parameters: Control system: Siemens Sinumerik Switch-on hours: 80654 h Hours: 33758 h Maximum turning length: 650 mm Maximum turning diameter over bed: 250 mm Maximum turning diameter over support: 120 mm Maximum length of travel in the X-axis: 300 mm Max. travel length of the Z-axis: 650 mm Maximum spindle speed: 7000 1/min Length: 4770 mm Width: 2220 mm Height: 1950 mm Weight: 5500 kg Equipment: Powered tools Bar Feeder
approved
dealer
dealer
Inv. Num. : 8228 Type: TC-42 Producer: Spinner Created: 2004 Parameters: Control system: Siemens Max. machining length: 500 mm Maximum turning diameter over bed: 400 mm Maximum main spindle power: 12 kW Maximum spindle speed: 4500 1/min Spindle bore: 42 mm Equipment: Powered tools
Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 2200mm Table diameter ... 2000mm Max. table load ... 20000kg Max. workpiece height ... 1710mm Axis Z ... 1000mm Average of the sanding piece ... 180 x 200mm powered tools ... 15 Number of positions in the tool changer... 15 Main engine power ... 58kW L x W x H ... 6700x10400x6400mm Main motor power of driven tools ... 19.5kW Speed of driven tools... 8-3300 rpm Work feed ... 4000mm/min Rapid traverse ... 10000m/min Axis C ... 360° IKZ... 20bar Speed of the clamping plate ... 2-160 rpm Machine weight ... 32000kg Documentation Conveyor C Axis Coverage according to CE marking The machine has undergone a complete overhaul. More info on request. With 1 year warranty.
approved
dealer
dealer
Inv. Num. : 8204 Type: SK 12 Producer: TOS Created: 1953 Parameters: Max. turning diameter: 1350 mm Clamp plate diameter: 1180 mm Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg
approved
dealer
dealer
Inv. Num. : 8203 Type: ALPHA 2800 XS Producer: Harrison Created: 2011 Parameters: Control system: FANUC Maximum turning length: 2000 mm Maximum turning diameter over bed: 800 mm Maximum turning diameter over support: 710 mm Maximum spindle speed: 1400 1/min Spindle bore: 125 mm Weight: 7500 kg
approved
dealer
dealer
Inv. Num. : 8139 Type: QTN-200M Producer: MAZAK Created: 2005 Parameters: Control system: Mazatrol Fusion 640 T Nexus Maximum turning length: 538 mm Maximum turning diameter: 210 mm Maximum Spindle Speed: 35-5000 1/min Tool magazine: 12 pieces Maximum length of travel in the X-axis: 230 mm Maximum feed in the Z-axis: 575 mm Number of axes: 3 pieces Chuck Size: 8 (Kitagawa BB208) Power consumption: 37 kW Length: 2485 mm Width: 1780 mm Height: 1840 mm Weight: 4380 kg
approved
dealer
dealer
Inv. Num. : 8070 Type: Multiturn 3000 Producer: Colchester Created: 2005 Parameters: Control system: FANUC Maximum turning diameter over bed: 460 mm Maximum turning diameter over support: 270 mm Spindle diameter: 78 mm Motor power: 11 kW Maximum spindle speed: 2250 1/min Travel X: 296 mm Travel Z: 1530 mm Equipment: Owner Vacuum
approved
dealer
dealer
Inv. Num. : 7997 Type: SC 3200 Producer: TITAN Created: GO 2020 Parameters: Control system: Sinumerik 840D SL Table diameter: 3000 mm Max. turning diameter: 3300 mm Motor power: 55 kW Max. workpiece height: 2260 mm Max. workpiece weight: 18000 kg Maximum table speed: 92 1/min Weight: 48000 kg
