lathes used for sale (3,041)

control: WEILER turning diameter over bed: 410 mmcentre height: 200 mmcentre distance: 1000 mmturning dia. over face-slide: 200 mmspindle bore: 54 mmspindle taper ISO: 55027/6 spindle turning speed - stepless: 4-3000 U/mintailstock quill taper MT: 4 diameter of quill: 65 mmquill stroke: 120 mmfeed - longitudinal/cross: 0-20 mm/minrapid traverse longitudinal and cross: 10/5 m/minspindle drive: 9/13 kWdimensions of machine: 2300x1200x1800 mmweight: 2.0 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 20 mmspindle passage: 24 mmturning length: 320 mmControl: CINCOM spindle turning speed - stepless: 200-10000 U/minturret head: weight of the machine ca.: 3.35 tdimensions of the machine ca.: 3.0x1.3x2.3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC TXP-200 FA turning diameter: 360 mmswing over bed: 600 mmswing diameter over bed slide: 450 mmturning length: 683 mmc-axis: indexing: 0.001 °turning speeds: -3000 U/mintool taper: VDI 40 Top turret tool hodler:: 12 tailstock quill taper MT: 5 quill travel: 100 mmfeed: 1-10 m/minrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/minOverall size: 4450x2100x2350 mmweight of the machine ca.: 7200 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Manufacture: WEILER C3 turning dia. over bed: 330 mmcentre height: 165 mmcentre distance: 750 mmturning dia. over face-slide: 160 mmspindle bore: 40.5 mmspindle taper: 55027/5 spindle turning speed - stepless: 1-4500 U/mintailstock quill taper MT: 3 dia. of quill: 50 mmquill stroke: 130 mmfeed - longitudinal/cross: 0.001-10 mm/mindimensions of the machine ca.: 2000 x 1300 x 1700 mmxmmxmmweight: 1600 kg3-jaw-chuck diameter: 160 mmmake: FORKKARDT quick change tool holder:: MULTIFIX type: B numbers of toolholders: 6 coolant: misc. accessories: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 212 mmturning length: 750 mmcontrol: HEIDENHAIN Manual Plus spindle turning speed - stepless: 10-4000 U/minturret head: 8 Stationen weight of the machine ca.: 2 tdimensions of the machine ca.: 2.85 x 1.65 x 1.80 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 270 mmturning diameter over slide rest: 130 mmturning length: 500 mmspindle turning speed - stepless: 40-3000 U/minweight of the machine ca.: 1 tdimensions of the machine ca.: 1.5x0.8x1.7 mDigital read-out HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mmcentre height: 170 mmcentre distance: 650 mmturning dia. over face-slide: 196 mmspindle bore: 42 mminner taper MT: 5 spindle turning speed - stepless: 20-3250 U/minweight of the machine ca.: 1,6 tdimensions of the machine ca.: 200 x 125 x 165 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 16 mmworkpiece length - max.: 145 mmmain spindle speeds:: 15000 rpm control: SIEMENS 840 DSL weight of the machine ca.: 2.6 tdimensions of the machine ca.: 2.2 x 1.5 x2.0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition: Very good condition

Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...

Retrofitted in 1998 and revised in 2012 by SIRMU Technical datas: Stroke: 2000 mm Inclination of the platform: 0-60 ° Rotation: 360° Table diameter: 4.500 mm Maximum table load: 50,000 kg Plate diameter: 2.250 mm Movement 4 stages 1 28 mm / min 2 100 mm / min 3 280 mm / min 4 560 mm / min tilting of the table: 0-60 ° 4 stages 2 0.7 ° / min 3 2 ° / min 4 4 ° / min 5 7 ° / min Rotation of the table 4 stages 1 270 mm / min referring to a diameter of 3,500 mm 2 890 mm / min 3 2,700 mm / min 4 5,400 mm / min Total weight: 90,000 kg

Technical data: Double column vertical turret lathe CNC control Siemens 802 D Weight 66 to 63 kw Dimensions 13,600 x 9,800 x 6,750 mm Faceplate diameter 3,500 mm Maximum workpiece height 2000 mm Max support adjustment 30 ° Maximum workpiece diameter 4,000 mm Maximum workpiece diameter with page support 3,750 mm Number of support 2 Max turning height 1,400 mm Maximum workpiece weight 25 to Max speed 30/min Min. speed 1/min

Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!

Technical data: Diameter over bed: 1550 mm Diameter over slide: 1600 mm Turning length: 5500 mm Max cross travel: 400 mm

Technical data: The machine is completely overhauled in 2011 with new electrics, new wiring, including new control SIEMENS Sinumerik 840D max. circulating and turning diameter: 2,000 mm max. turning height: 1,500 mm Sheet disc diameter: 1,600 mm max. table load: 11.20 to. Cross-beam adjustment: 1,170 mm

Technical data: Diameter over bed: 625 mm Turning length: 1500 mm Diameter via slide: 325 mm Spindle head shape: Cam-Lock Spindle drilling diameter: 105 mm

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

Technical data: Turning diameter over bed: 1260 mm Turning diameter at opening: 2700 mm Turning diameter at the pit: 3800 mm Turning diameter via slide: 900 mm Turning length: 4000/5000 mm

Technical data: 2000 overtaken Turning diameter over bed: 1350 mm Turning diameter via slide: 1250 mm Sheet: 1350 mm Clamping on the flat disc: 300-900 mm Turning length: 5000/6000 mm

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc i Series, Dmax320mm, X175 Z330, 5,000rpm, 12 tool positions, Tool measuring system, Part catcher, 4 jaw inserts,, Clamping pliers, many accessories

The machine is in good technical condition, after prior agreement it is possible to test it. approx. 3000 hours of TRIPS 550X400

The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production

Inv. Num. : 9089 Type: CT 40/1000 Producer: Gildemeister Created: 1991 Parameters: Maximum turning length: 1000 mm Maximum turning diameter over bed: 400 mm Maximum turning diameter over support: 225 mm Spindle diameter: 56 mm Weight: 3200 kg Equipment: Chip conveyor Tailstock Spare parts Shovel Powered tools

Inv. Num. : 9085 Type: KMX XL 32 Producer: Manurhin Created: 2003 Parameters: Maximum turning length: 330 mm Max. turning diameter: 33 mm Length: 3850 mm Width: 2000 mm Height: 2100 mm Weight: 6000 kg

Inv. Num. : 9082 Type: SKJ 8 NC Producer: TOS Created: GO 2020 Parameters: Control system: MEFI CNC 872 Max. workpiece diameter: 800 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Length: 2000 mm Width: 2550 mm Height: 3700 mm Weight: 10000 kg Equipment: Hydraulic table clamping Electric rotation of the cutter head Ball screws GO 2020: Complete machine overhaul with conversion to a new MEFI CNC 872 control system Conversion from the original hydraulic drives to Yaskawa servo motors New electrical installation New hydraulic system and central lubrication

This 3-axis DMG CTX 310 was manufactured in 2004. It features a maximum workpiece diameter of 246 mm and a maximum workpiece length of 445 mm. The machine offers X-axis movement of 213 mm and Z-axis movement of 450 mm, along with a spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTX 310 horizontal turning machine we have for sale. Contact us for further details.