We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (5)
- Automatic Drillers (3)
- Automatic thread drills (3)
- Battery powered drilling machines (8)
- Bench Type Drilling Machines (56)
- Boring Mills (44)
- Centre Drilling Machines (3)
- CNC Boring Mills (30)
- Co-Ordinate Drilling Machines, Vertical (2)
- Column-Type Drilling Machines (155)
- Contracting Pods Panel Drills (13)
- Core-drilling machines (10)
- Deep Hole Drilling Machines (56)
- Drilling And Milling Machines (20)
- Drilling Centres (2)
- Drilling Machines (48)
- Gang Drilling Machines (5)
- High Performance Drilling Machines (10)
- High Speed Drilling Centres (HSC) (2)
- High Speed Machining Centres (HSC) (14)
- High Speed Radial Borers (17)
- Horizontal Boring And Milling Centres For Cubical Workpieces (5)
- Horizontal Numerically Controlled Machining Centres (37)
- Horizontal Processing Centers (36)
- Indexing Drum Drilling Automatics (1)
- Jig Borers (3)
- Jig boring machines (17)
- Jig Boring Machines, Vertical (2)
- Magnetic drilling machines (8)
- Metal processing centers (1)
- Milling machine centers (16)
- Milling machining centres (3)
- Multi Spindle Bar Maschines (1)
- Multi Spindle Drilling Machines (46)
- Multiway Drilling And Boring Machines (3)
- Numerically Controlled Machining Centres (281)
- Other Drilling And Boring Machines (2)
- Other Machining Centres (15)
- Panel Drills (17)
- Pillar-Type Drilling Machines (27)
- Portal machining centres (5)
- Processing Centers (248)
- Profile processing centres (1)
- Radial Drilling Machines (87)
- Round Turntables (7)
- Special drilling machines (47)
- Special Purpose Drilling And Boring Machines (1)
- Special Purpose Machining Centres (1)
- Standing Drills (2)
- Table Drills (54)
- Tapping Machines (25)
- Tool machining centres (1)
- Transmission drills (3)
- Turning-machining centres (9)
- Universal processing centres (77)
- Vertical Boring And Milling Centres For Cubical Workpieces (2)
- Vertical Numerically Controlled Machining Centres (110)
- Vertical Processing Centers (231)
- Vices For Machines (10)
- more
- ABA (2)
- ABARBOGA MASKINER (1)
- ABB (1)
- ABM (8)
- ACCUWAY (1)
- Aciera (3)
- ADAM (1)
- AEG (3)
- AERRE (1)
- AES (1)
- AES GROUP (1)
- AGEMA (1)
- AGIE (1)
- AGIE CHARMILLES (5)
- AGW BOCKLENBERG (1)
- Akira Seiki (2)
- ALBERTI (1)
- ALBRECHT (1)
- ALKETT (1)
- ALLOY WHEEL M... (1)
- Alzmetall (70)
- AMADA (1)
- ANAYAK (3)
- ANGER (5)
- APRA NET (1)
- ARBOGA (8)
- ARBOGA MASKINER (1)
- ARCHDAHLE (1)
- Artykuly Techniczne (6)
- ASDORF (1)
- AUDAX (1)
- AUERBACH (1)
- AVIA (1)
- AWEA (5)
- AXA (18)
- AXON LITZ (1)
- BACCI (1)
- BARON MAX (1)
- BATLIBOI (1)
- Battenfeld (2)
- BECK (1)
- BECKHOFF (1)
- BERGMANN (1)
- Bergonzi (2)
- Bernardo (16)
- BERNHARD STEINEL (1)
- BERNSTAIN (1)
- BFW (3)
- Bierrebi (3)
- Bierrebi LEA SRL. (9)
- BIESSE (1)
- Bilz (3)
- Bimak (2)
- Bimatec Soraluce (3)
- BIZERBA (1)
- BJM BECKHOFF (1)
- BJM Miksch (2)
- BLANSKO (1)
- BLUETOOTH CNC (1)
- BLUTHARDT (4)
- BLUTHARDT/PARABO (1)
- BMW (2)
- Boehringer (3)
- BOHRPOWER (1)
- BORNEMANN (1)
- Borsig (2)
- BOSTOMATIC (1)
- BREDA (1)
- BREDA / GI-EFFE-DI (1)
- BRIDGEPORT (10)
- BRIDGEPORT - HARD... (1)
- BRIDGEPORT HARDINGE (1)
- BROTHER (9)
- BUCKUHLY (1)
- BUFFALO MACHINERY (1)
- BUMOTEC (1)
- BURGSMUELLER (1)
- BURKHARD UND WEBER (1)
- BURKHARDT + WEBER (1)
- BURKHARDT + WEBER BW (1)
- BüHRER (1)
- C.B.FERRARI (1)
- Caber (2)
- Castel (3)
- CERUTI (1)
- CHARMILLES (3)
- CHEMNITZER MASCHINENBAU (1)
- CHEMNITZER MB (1)
- Chiron (48)
- CINCINATI MILACRON (1)
- CINCINNATI (8)
- CINCINNATI MILACRON (2)
- CMA (6)
- CME (1)
- CNC-STEP (7)
- COBALM (1)
- COILTEC (1)
- COLGAR (3)
- Collet (4)
- COLLET + ENGELHARD (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 101)
ABA 2
ABB 1
ABM 8
ACCUWAY 1
Aciera 3
ADAM 1
AEG 3
AERRE 1
AES 1
AGEMA 1
AGIE 1
ALBERTI 1
ALBRECHT 1
ALKETT 1
Alzmetall 70
AMADA 1
ANAYAK 3
ANGER 5
APRA NET 1
ARBOGA 8
ASDORF 1
AUDAX 1
AUERBACH 1
AVIA 1
AWEA 5
AXA 18
BACCI 1
BATLIBOI 1
BECK 1
BECKHOFF 1
BERGMANN 1
Bergonzi 2
Bernardo 16
BFW 3
Bierrebi 3
BIESSE 1
Bilz 3
Bimak 2
BIZERBA 1
BLANSKO 1
BMW 2
Borsig 2
BREDA 1
BRIDGEPORT 10
BROTHER 9
BUCKUHLY 1
BUMOTEC 1
BüHRER 1
Caber 2
Castel 3
CERUTI 1
Chiron 48
CMA 6
CME 1
CNC-STEP 7
COBALM 1
COILTEC 1
COLGAR 3
Collet 4
CONDAIR 1
CORDIA 6
CORNAC 1
Csepel 3
CYBERNET 1
DAEWOO 1
DAH LIH 1
DAHLIH 1
DART 1
DECKEL 10
DECKEL MAHO 87
Deckel-MAHO 18
DEFUM 5
DEGEN 1
Depo 2
DEUMA 1
DIHART 1
DIVERS 1
diverse 3
DIXI 1
DKF 1
DMC 3
DMG 43
DMG MORI 70
DMG-Mori 10
DMU 1
Donau 17
DOOSAN 23
DORMER 1
DUGARD 1
DUMETA 6
EBERLEI 1
Einhell 2
Elan 2
ELHA 5
ELMAG 3
elumatec 11
EMA 1
EMAG 1
EMCO 6
EMMEGI 2
ENSHU 3
ERD 2
Erlo 17
EUMACH 2
EWAG 2
FADAL 6
FAMU 1
Famup 5
FANUC 10
FEELER 2
FEHLMANN 11
FEIN 1
FELLER 1
FERMAT 1
FERVI 1
FIDIA 3
FIRST 2
FLOTT 47
FORMAT 2
FPT 5
FRORIEP 5
FSA 1
FUJITSU 1
GARANT 1
GEISS 1
GEORG 1
GERARDI 1
GIANA 1
GILLARDON 22
GIRARDS 1
GOSMETA 1
GOTHA 1
GROB 1
GSP 1
Gühring 3
GüNTHER 1
HAAS 34
HACO 1
HAEFNER 1
Hardinge 2
HARTFORD 11
Hauser 3
HBM 16
HECKERT 6
HEDELIUS 27
HEGNER 1
HELLER 16
Hermle 28
HETTNER 1
HIMMEL 2
HKS 2
HOLZMANN 2
HTT 1
HURCO 40
HURON 6
HUVEMA 5
HWACHEON 7
HYUNDAI 3
IBARMIA 8
IMATEC 1
IMF 4
IMSA 2
INDEX 1
INNSE 1
approved
dealer
dealer
travel: 600 mmlength: 450 mmwidth: 400 mmspindle turning speed range: 20 4500 U/minControl: Heidenhain TNC 425 weight: 3300 kgdimensions of the machine ca.: 4,0 x 3,8 x 2,1 mtotal power requirement: 15 kWtool taper: HSK A 63 table-size: 850 x 440 mm3-axis machining centreThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
table-size: 1800 x 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 60 mm / MK5arm length: 1600 mmquill stroke: 310 mmspindle speed:: 28...2500 U / mintable-size: 1470 x 986 mmtotal power requirement: 4 kWweight of the machine ca.: 4,6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 800 mm W-axis travel: 1250 mm rotating range B-axis from: 0 ° rotating range B-axis up to: 360 °WORKING RANGE -BORING- drilling depth (max): 800 mm drilling capacity full bore (steel): 25 mmSPINDLE / HEAD tool fixture: HSK A50 drive power: 15 kWAXIS DRIVES feed velocity (max): 15000 mm/minTOOL MAGAZINE number of positions: 20 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 5600 mm space requirements -front/back-: 4910 mm total heig ...
approved
dealer
dealer
Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement
approved
dealer
dealer
spindle diameter: 135 mmx-travel: 1000 mmy-travel: 700 mmz-travel: 300 mmcross rail adjustment - vertical: 780 mmdistance between table/spindle: 1000 mmtable surface area: 1100 x 842 mmdistance between columns: 1100 mmtable load: 1500 kgtool taper: SK 45 spindle turning speed range: 2400 U/minspindle drive: 5,9 kWfeed range: 1 - 6000 mm/minweight of the machine ca.: 10,6 tdimensions of the machine ca.: mRetrofit / overhauling in May 2005 (with geometric measurement):- New Heidenhain iTNC-530 control- New electronics- New Siemens servomotors- Heidenhain glass scales- Revision of drilling spindle unit(total costs € 118,436.00)Equipment:Infrared measuring probe m&h 38.10-MINIElectron. HandwheelVarious tool holdersTransport dimensions:- Machine (LxWxH) 3500 x 2600 x 2750 mm- Control cabinet (LxWxH) 2300 x 600 x 2300 mm- Hydraulic (LxWxH) 800 x 600 x 1000 mmThe data for this ad was create ...
approved
dealer
dealer
Specifications: - Drilling capacity in wood 40 mm - Drilling capacity in steel 18 mm - Drilling spindle holder MK 2 - Quill stroke 120 mm - Drilling spindle speeds infinitely variable in steps - 60 - 2840 rpm - Max. distance table – drilling spindle 600 mm - Boom / unit tiltable left + right 45° each - Boom / unit swivel left + right - Table size 450 x 450 mm - Drive 400 V / 0.33 / 0.55 kW - Space requirement approx. W 500 x H 1870 x D 1200 mm - Weight approx. 150 kg
approved
dealer
dealer
bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 460 x 460 mmturning speeds: 75 - 3200 U/minengine output: 1,5 kWcolumn diameter: 125 mmthread: M16 ST60feed: 0,10/0,18/0,26 mm/Udimensions: 800 x 500 x 2200 mmweight: 350 kg- automatic drill feeds (magnetic clutch)- Height adjustable and angle adjustable table- Movable work table- Integrated cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
CNC Machining Center Hedelius BC 100 P-3500 Magnum Control: Siemens Sinumerik 840D Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm T-slots 5 pieces Distance T-slots 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Mount: DIN 69871 SK 50 Tool magazine: 50 – compartment Spindle speed: 20 - 4,500 rpm Accessories - Door automation - Handheld operator - Machine hood -Conveyor
approved
dealer
dealer
x-travel: 800 mmy-travel: 400 mmz-travel: 350 mmtotal power requirement: 40 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 40 mmthroat: 275 mmbore stroke: 120 mmspindle taper: MK 4 turning speed range: 75 - 3200 U/min: 190 mm: 490 mmtable surface area: 700 x 210 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmtotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,8 x 0,75 x 1,85 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
spindle diameter: 0 mmx-travel: 700 mmy-travel: 600 mmtable length: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDouble Column Design Jig BorerTablesize: 800 x 600mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
thread dia.: M6 - M22 mm: 60/200 U/min.: 105 Nmair pressure: 6 - 8 barworking area: 400 - 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 60 mmthroat: 420 mmbore stroke: mmtotal power requirement: 4 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: mDrilling Ø, steel or cast iron 60 mmBoring Ø with pre-bore ½ 100 mmTable Ø 600 mmDistance between spindle and column 420 mmSpindle taper MK512 spindle speeds 120 - 800 rpmQuill stroke 270 mmMounting height above rotary table 800 mmMounting height above base plate 1,400 mm8 drilling feeds 0.13 - 1.8 rpmSpindle drive 4 kW Total electrical load, approx. 4 kW - 380 V - 50 HzWeight approx. 2,600 kgAccessories / Special Features Manual height adjustment of boring head. 2-speed motor drive. Swing-out rotary table. Machined base plate (for setting up workpieces).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 3 - 5 mmthroat: 150 mmbore stroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mVarious Special purpose drilling machinesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
cycle time: 0 sectotal power requirement: 2,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: mP O S A L U X (Switzerland)Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mmSpindle stroke 0 - 18 mmWorking stroke, max. 0 - 12 mmQuick feed 60 mm/secBoring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpmDistance between spindles, vertical, approx. 80 mmTable speeds (for deburring) approx. 100 rpmTable Æ, approx. 100 mmTable bore, approx. 70 mmTable slide swivelling device, approx. 60 °/secSwivelling range 0 - 100 °Total drive, approx. 2.5 kW Weight 1,000 kgAccessories / Special FeaturesSerial No. 6.8230/9Machine is equipped with a modern POSALUX SELECTRON Controlwith keyboard and LED for direct programming on the machine (inprinciple the same as with a punchboard control). With setting microscope a ...
approved
dealer
dealer
core drilling diameter max.: 18 mmbore depth: 320 mmswing diameter: mmtotal power requirement: 33 kWweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
workpiece diameter: 8-125 mmgrinding depth: 130 mmclamping length: 50-1100 mmmax. workpiece diameter: 0 mmmin. workpiece diameter: 0 mmworkpiece length: mmtotal power requirement: 1 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: mT E C H N I C A (Switzerland)Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400_______________________________________________________Distance between centres 50 – 1,100 mmHeight of centres 145 mmWorkpiece Ø 8 – 125 mmMax. centre hole taper Ø 2 – 50 mmMax. centre hole taper angle 60 °Clamping range of vice 4 – 150 mmS ...
approved
dealer
dealer
core drilling diameter max.: 50 mmbore depth: 2000 mmswing diameter: mmdrilling capacity diameter max.: 110 mmtotal power requirement: 30 kWweight of the machine ca.: 10 tDrilling Ø, approx. 2 - 50 mmBoring Ø, approx. 100 mmDrilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mmStroke of drilling slide, approx. 4,000 mmDistance between the two spindle heads 5,000 mmHeight of centres above guideways 350 / 450 mmDrilling feed of drilling slide, infinitely variable 20 - 200 mm/minQuick feed of drilling slide 2,500 mm/minSpindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kWDrive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kWTotal electrical load, approx. 60 kW - 380 V - 50 HzTotal length of machine / guideways 7,500 / 5,000 mmWeight, approx. 10,000 kgAccessories / Special Features Machine consists of the following elements: Main spind ...
approved
dealer
dealer
cycle time: 0 sectotal power requirement: 2,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: m: : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mmSpindle stroke 0 - 18 mmWorking stroke, max. 0 - 12 mmQuick feed 60 mm/secBoring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpmDistance between spindles, vertical, approx. 80 mmTable speeds (for deburring) approx. 100 rpmTable Æ, approx. 100 mmTable bore, approx. 70 mmTable slide swivelling device, approx. 60 °/secSwivelling range 0 - 100 °Total drive, approx. 2.5 kW Weight 1,000 kgAccessories / Special FeaturesSerial No. 6.8230/9Machine is equipped with a modern POSALUX SELECTRON Controlwith keyboard and LED for direct programming on the machine (inprinciple the same as with a punchboard control). With setting microscope and machine lamp.The data for this ad was created with ModulMWS - ...
approved
dealer
dealer
: 0 : 0 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mPC board drilling m/c, single spindle, projektor.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
spindle diameter: 130 mmx-travel: 3000 mmy-travel: 2000 mmtotal power requirement: 4,5 kWweight of the machine ca.: 30 tSpindle Ø 130 mmSpindle taper SK 50Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mmLower table 3,300 x 2.400 mmMax. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mmFeeds 0.9 - 2,000 mm/minQuick feed for headstock and column 5,000 mm/minQuill feed 0.5 - 1,200 mm/minSpeed range, partially infinitely variable 4.5 - 1,250 rpmWeight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. ...
approved
dealer
dealer
spindle diameter: 105 mmx-travel: 1250 mmy-travel: 1000 mmz-travel: 600 mmtable length: 1100 mmtable width: 900 mmtool adaptor: 50 ISO / MKtotal power requirement: kWweight of the machine ca.: tCNC Table Borer, Reconditioned 2002, BOSCH CC 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
workpiece diameter: 125 mmgrinding depth: 50 mmclamping length: 2000 mmtotal power requirement: 0,5 kWweight of the machine ca.: 1000 kgdimensions of the machine ca.: mT E C H N I C A (Switzerland)Centre Hole Grinding MachineModel ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278_______________________________________________________Distance between centres 50 – 2.000 mmHeight of centres approx. 125 mmWorkpiece Ø in clamping Vice 8 – 125 mmSwing of workpiece over tailstockguide 290 mmSwing of Workpiece max. over grinding head pillar 300 mmMax.weight of workpiece 250 kgMax. centre hole taper Ø 2 – 50 ...
approved
dealer
dealer
table length: 2000 mmtable width: 1800 mmtable load: 12,5 ttotal power requirement: 10 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: mTable size approx. 2,000 x 1,800 mmMax. weight of workpiece, approx. 12,500 kgTable travel, longitudinal 1,250 mmTable height above floor 920 mmLongitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/minLongitudinal quick feed 2,000 mm/minTurning quick feed, with Ø 1,000 mm 3,150 mm/minWeight of machine 7,500 kgExternal dimensions of machine 3,700 x 2,100 x 920 mmTotal electrical load 10 KW - 180 V - 50 HzAccessories / Special Features Telescopic covers for the guides. Infinitely variable table feed. Optical display for setting and reading the longitudinal adjustment. Optical display for setting and reading the angle.Condition : Satisfactory to good. Machine can be inspected under power.Delivery : ...
approved
dealer
dealer
bore capacity in steel (diameter): 15 / 18 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 4000 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 1,1 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mPrecise table drill:- high accuracy and quality- Drill table adjustable via rack and swiveling around the column- Full engine protection- Star grip- 230 volt mains connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 500 mmy-travel: 350 mmz-travel: 350 mmtotal power requirement: 15 kWweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 630 mmy-travel: 630 mmz-travel: 630 mmtotal power requirement: 30 kWweight of the machine ca.: 12500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 30 mmthroat: 250 mmbore stroke: 130 mmspindle taper MT: 3 MKtable:: 380 x 380 mmcolumn diameter: 98 mmturning speeds: 75 - 3200 U/minfeeds: mm/Utotal power requirement: 1,1 kWweight of the machine ca.: 220 kg.range L-W-H: 0,5 x 0,6 x 2,05 mmGear drillThread cutting deviceLeft/right barrelTilting work table.Lighting.2 electric Speed levels.Depth stop.Gears run in oil.Packaging dimensions:2100x400x710mmWeight 260kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 32 mmthroat: 200 mmbore stroke: 120 mmspindle taper MT: 4 MKtable:: 290 x 270 mmcolumn diameter: 92 mmturning speeds: 150 - 2450 U/minfeeds: 0 mm/Utotal power requirement: 1,1 kWweight of the machine ca.: 95 kgrange L-W-H: 0,66 x 0,8 x 1,7 mColumn drilling machine with:ARBO / CE approved protective cover.Quick release chuck with pin.Tiltable work table.Deep stop.Ejector wedge.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
