boring mills and machining centers used for sale (2,919)

x-travel: 800 mmy-travel: 500 mmz-travel: 510 mmtotal power requirement: 60 kWweight of the machine ca.: 10 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmbore capacity in cast iron (diameter): 60 mmthreading cutting capacity:: M36 throat: 400 mmbore stroke: 230 mmspindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/Uspindle turning speed range: 54 - 1032 U/mintransmission ratio: 12 Stufencolumn diameter: 200 mmtable surface area: 550 x 550 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,72 tdimensions of the machine ca.: 0,6 x 1,2 x 2,6 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection ...

bore capacity in steel (diameter): 60 mmbore capacity in cast iron (diameter): 70 mmthreading cutting capacity:: M50 throat: 420 mmbore stroke: 260 mmspindle taper: MK 5 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/Uspindle turning speed range: 64 - 1210 U/mintransmission ratio: 12 Stufencolumn diameter: 220 mmtable surface area: 600 x 600 mmtotal power requirement: 4 kWweight of the machine ca.: 0,82 tdimensions of the machine ca.: 0,7 x 1,2 x 2,7 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection h ...

voltage: 50 Vfrequency: 50 Hzampere: 3,7 A: 21882 speeds:: 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 120 mmspindle taper MT: 4 MKtable:: 500 x 460 mmcolumn diameter: 115 mmturning speeds: 75- 3200 U/minfeeds: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,5 kWweight of the machine ca.: 350 kgrange L-W-H: 2,2 x 0,8 x 0,7 mmColumn drilling machine with:automatic feedThread cutting function.Digital depth displayCoolant system2 stage motorSpindle protectionSwivel tablePivoting drill headLED lightingPackaging dimensions:730x760x188mmWeight 340kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 20 mmthroat: 180 mmbore stroke: 82 mmturning speeds: 220 - 2840 U/min: 290 x 290 mmtotal power requirement: 0,55/0,75 kW / Voltweight of the machine ca.: 54 Kgdimensions: 820 x 500 x 290 mmCE-tested spindle hood.Keyless chuck (1 to 16 mm)Tilting work table.Depth stop.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 350 mmbore stroke: 180 mmspindle taper MT: 4 MKtable:: 560 x 560 mmcolumn diameter: 140 mmturning speeds: 50 - 1450 U/minfeeds: 0,1 - 0,2 mm/Utotal power requirement: 1,5 kWweight of the machine ca.: 580 kgrange L-W-H: 2,27 x 0,7 x 1,1 mm• machine base for clamping high workpieces• Digital Depth Gauge• Gearbox swivels 180 °• silent running through geärtete, ground oil-cooled gears• Tapping Function• electromagnetic clutch for drill feed• automatic feed• electric drive for table height adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 117490h, spindle hours: 18086h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 113894h, spindle hours: 13349h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible.

Verfahrweg X/Y/Z: 3200mm/1100mm/900mm, max. Werkstückgewicht: 5000kg, Tischdimensionen X/Y/Z: 3250mm/1220mm/1030mm. Spindelleistung: 45kW, Drehzahl: 6000U/min, Werkzeugaufnahme: SK50, Werkzeugdurchmesser: 125mm, Werkzeuglänge: 300mm, max. Werkzeuggewicht: 15kg, NC-Rundtischdimensionen X/Y: 800mm/800mm. Maschinendimensionen X/Y: ca. 7800mm/4700mm, Gewicht: ca. 25000kg, Steuerung: Siemens Sinumerik 810D Shopmill, Betriebsstunden: ca. 32000h, Spindelstunden: ca. 18000h. Inklusive Späneförderer und IKZ. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich.

Travel X/Y/Z: 900mm/800mm/1020mm, rapid traverse: 50m/min, speed: 10000rpm, plate dimensions X/Y: 630mm/630mm, max. tool diameter: 300mm, max. swivel diameter: 1000mm, max. table load: 1200kg, tool positions: 300, tool holder: HSK 100, motor power: 35kW, machine weight: approx. 16000kg. Including chip conveyor, compressed air preparation panel, hydraulic-pneumatic system, cooler and various spare parts. Documentation available. On-site inspection is possible.

Drilling capacity: 35mm, mounting: MK4, speed: 1400 rpm, feed: 0.4mm/rev. On-site inspection is possible.

Travel X/Y/Z: 700mm/400mm/300mm, table dimensions X/Y: 650mm/400mm, max. table load: 350kg, spindle mount: BT30, speed: 12000rpm, power: 5.5kW, torque: 82.7Nm. Rapid traverse: 50m/min, feed: 50m/min, tool positions: 21, tool diameter: 75mm, tool length: 210mm, tool weight: 3kg. Machine dimensions X/Y/Z: approx. 2550mm/1450mm/2900mm, control: Fanuc 0iMF. Documentation available. On-site inspection is possible.

Drilling capacity in steel/cast iron: 40mm/60mm, throat depth range: 300mm-1250mm, max. workpiece height: 745mm, spindle mount: MK5, spindle stroke: 355mm, speed: 1200rpm, feed: 756mm/min, column diameter: 300mm, spindle-plate distance: 280mm-1380mm, table dimensions X/Y: 1400mm/750mm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/2800mm, weight: approx. 3000kg. On-site inspection is possible.

Drilling capacity in steel: 50mm, spindle mount: MK5, speed: 1000rpm, throat depth: 355mm, drilling stroke: 280mm, spindle-table distance: 710mm, spindle-column distance: 355mm, table dimensions X/Y: 630mm/500mm, column diameter: 160mm. Machine dimensions X/Y/Z: 1200mm/800mm/2700mm, weight: approx. 1650kg. On-site inspection is possible.

Table dimensions X/Y: 1370mm/660mm, travel X/Y/Z: 1250mm/660mm/635mm, speed: 8000rpm, spindle mount: BT40, tool positions: 32, spindle-table distance: 790mm, control: Siemens 810 T. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 500mm/350mm/300mm, table dimensions X/Y: 320mm/320mm, max. table load: 450kg, speed: 13000rpm, spindle power: 5.5kW, spindle mount: HSK40, tool positions: 24, max. tool diameter: 75mm, max. tool length: 200mm, max. tool weight: 3kg, rapid traverse: 60m/min. Machine dimensions X/Y/Z: approx. 4200mm/1250mm/2450mm, weight: 4400kg, control: Fanuc Series 21i-MB. Documentation available. On-site inspection is possible.

X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible.

Travel X/Y/Z: 600mm/500mm/400mm, table dimensions X/Y: 900mm/600mm, spindle mount: SK40, speed: 6000rpm, tool positions: 24, feed: 6m/min, rapid traverse: 15m/min, machine dimensions X/Y/Z: approx. 4000mm/4000mm/2700mm, weight: approx. 5000kg. On-site inspection is possible.

Travel X/Y/Z: 700mm/500mm/600mm, speed: 6300rpm, power: approx. 10kW, feed X/Y/Z: 4m/min, rapid traverse X/Y/Z: 10m/8m/10m/min, machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, weight: approx. 6000kg, operating hours: 65425h. On-site inspection is possible.

A CNC vertical machining center Akira Seiki is available. Travel X/Y/Z: 2060mm/850mm/815mm, spindle-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repetition accuracy: +/-0.005mm. Tool positions: 28, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Mitsubishi 70, documentation available. On-site inspection is possible.

A CNC vertical machining center Akira Performa with a counter bearing on the A-axis is available. Travel X/Y/Z: 2060mm/850mm/815mm, spindle-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repetition accuracy: +/-0.005mm. Tool positions: 28, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Siemens 828, documentation available. On-site inspection is possible.

Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible.

Four Chiron CNC machining centers are available. Travel X/Y/Z: 1250mm/840mm/550mm, rapid traverse X/Y/Z: 60m/min, speed: 12000rpm, power: 22.5kW, torque: 140NM, tool positions: 24, tool holder: HSK-63, max. tool length: 320mm, machine weight: approx. 10000kg, control: Siemens 840D. Including IKZ, chip conveyor and Fibro swivel axis. Documentation available. On-site inspection is possible. Individual sale possible.

Offer 25118 Specifications: - Tapping capacity approx. M 3 - M 8 - Working range ( swivel radius ) approx. 1800 mm - Multi-position head - Speeds: 8 - 700 rpm - Quick-change tool mount size 1 dia.19 - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space requirement approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: HEIDENHAIN control: MillPlus iT table surface area: ø 500 x 380 mmB-axis: 0 - 161,955 °C-axis: 360 °spindle taper: SK 40 spindle turning speed range: 20 - 18.000 U/minspindle power: max. 35 kWmax. torque on the spindle: max. 130 Nmfeeds -stepless-: bis 20.000 mm/minrapid traverse X/Y/Z axis: 80 / 50 / 50 m/minrapid traverse B-axis: 40 U/minC-axis rapid feed: 50 U/minno. of tools in magazin: 30 tool diameter if 2 vacant positions: 130 mmtool diametre at full load: 80 mmtool length - max.: 300 mmweight of tools max.: 6 kginternal coolant system feed: 40 bartotal power requirement: 52 kVAweight of the machine ca.: 6 t= 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter deviceThe data for this ad was created with ModulMWS - the software solution of Log ...

bore capacity in steel (diameter): 35 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 4 table-size: 500 x 400 mmspindle turning speed range: 75 - 3.010 U/minfeed range - boring: 0,1 / 0,15 / 0,22 / 0,33 mm/Uquill stroke: 150 mmvoltage: 400 Vtotal power requirement: 1,8 kWweight of the machine ca.: 275 kgdimensions of the machine ca.: 0,70 x 1,00 x 1,95 mthreading device: - Serial-No.: 138050673- Electromagnetic feed- Threading device- Machine vice 150 mm- Two clamping screws 14 mm- 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3- Cutting oil sprayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 245 mmbore stroke: 135 mmspindle taper MT: 3 table-size: 410 x 380 mmspindle turning speed range: 10 - 2100 U/minvoltage: 400 Vtotal power requirement: 1,1 kWweight of the machine ca.: 210 kgdimensions of the machine ca.: 0,7 x 1,8 x 1,75 mthreading device: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.