boring mills and machining centers used for sale (3,191)

Machine reamers, reamer, reaming tool, locating cutter set, attachment reamer -Machine reamer: adjustable, 2 pieces -Diameter: Ø 32/55 mm -Mounted holder: MK3 -Submission/Price: complete -Transport dimensions: 360/90/H60 mm -Weight: 3.6 kg

Machine reamers, reamer, reaming tool, locating knife cutting set -Machine reamer: adjustable, 3 pieces -Diameter: Ø 28/30/38 mm -Recording: MK2 -Submission/Price: complete -Transport dimensions: 340/100/H40 mm -Weight: 2.7 kg

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Kahaco, Adjustable machine reamer, 6 pieces -Diameter: Ø 24/26/31/32/33/38 mm -Recording: MK3 -Submission/Price: complete -Transport dimensions: 380/180/H45 mm -Weight: 6.8 kg

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Kahaco, adjustable machine reamer -Diameter: Ø 62 mm -Recording: MK4 -Dimensions: Ø 62 x 455 mm -Weight: 4.3 kg

Control Siemens 828D Travel X/Y/Z: 1100 x 610 x 610 mm Table size: 1250 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, expansion sleeve -Morse taper sleeve: Morse taper extension MK2 2 pieces -Type: MK2/2 -Total length: 300 / 450 mm -Submission/Price: complete -Transport dimensions: 450/55/H30 mm -Weight: 2.2 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK3 5 pieces -Type: 4x MK3/3 / 1x MK3/4 -Price/Fee: complete -Transport dimensions: 400/180/H45 mm -Weight: 7.8 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK4 4 pieces -Type: 2x MK4/4 / 1x MK4/5 / 1x MK4/1 -Price/Fee: complete -Transport dimensions: 560/180/H65 mm -Weight: 9 kg

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmTransverse stroke260 mmLongitudinal stroke1345 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)5,4 x 2,07 x 2,6 mWeight approx.7800 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

Key data: 762 mm, 508 mm, 610 mm

Hurco VMX 30 Year 04/2007 Travel (X / Y / Z) 762 mm / 508 mm / 610 mm Spindle holder SK 40 Spindle power 11 kW Tool Stations 24 Stations, Automatic Tool Changer (ATC) Max. tool weight 7 kg Max. tool length 300 mm Max. tool diameter 80 mm Control HURCO WinMax ver. V8 01.09.25... Options see pictures Machine weight approx. 4,700 kg Machine dimensions (L × W × H) approx. 3.9 m × 2.4 m × 2.7 m Interior was painted, scrapers of the telescopic covers were renewed. Machine can be viewed under power by appointment. Price is net plus VAT. Freely loaded onto trucks

Offered is a horizontal machining center (HMC). Travels X/Y/Z: 560mm/510mm/510mm, max. dynamics: 40000mm/min, spindle: 12000rpm, tool holder: MAS BT 40, tool magazine: 60 positions (chain magazine), pallet system: 2-station pallet changer, pallet size X/Y: 400mm/400mm, accessories: approx. 200 tool holders (BT 40), 2 MMI towers with 8 clamping bars, hinged belt chip conveyor, Blum laser/probe, Renishaw 3D probe, machine weight: approx. 9000kg. Inspection possible by appointment.

bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: mmtotal power requirement: 4 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console -Manufacturer: Elan, two-hand control panel with counter -Type: SEP 03.0.2.1.22 -Connector: 10-pin -Dimensions: 460/440/H140 mm -Weight: 6.4 kg

Key data: 630 mm, 630 mm, 630 mm

Spindle replacement 12/2018 Technical data: Manufacturer: Heller Type: H1000 Control: Siemens 840D SL Year of construction: 2008 (commissioning 2010/11) Travel X/Y/Z: X 630 mm, Y 630 mm, Z 630 mm Travel B-axis: 360° Working spindle Speed: 10,000 rpm (Kessler) Tools Tool changer: 54-fold Tool holder: SK40 Pallet changer: 2-fold Pallet size L/W: 500 x 400 mm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring system Drill Break Detection Chip conveyor Knoll coolant system with high pressure

Alzmetall AB 30 / R-1400 Radial Drilling Machine -Projection 1400mm -Drilling capacity / steel 45mm -Tapping device max. M30 -Spindle holder MK 4 -Spindle stroke 160mm -Speed range 40 - 1800 rpm -Automatic feeds 4 levels / 0.15-0.36 mm/u -Column diameter 300mm -Clamping cube -Motor power 3KW Dimensions: LxWxH 2.3x1x2.2 meters / Weight 1700Kg

Key data: 1270 mm, 660 mm, 610 mm

For sale Beautiful machining center type VMX-50, equipped with an Ultimax controller. X-, Y-, and Z-axis movement is 1,270 x 660 x 610 mm. BT-40 spindle mounting. Chip conveyor with right ejection. Table size 1,500 x 660 mm. Machine weight 9,500 kg.

Key data: 3000 mm, 800 mm, 800 mm

For sale Matec vertical machining center type 30 HV. Equipped with a Heidenhain and TNC 530 controller. This machining center also has a swivel head: 1-axis swivel head, infinitely variable, +/- 105°. Equipped with a chip conveyor with left ejection, and high pressure pump with fine filter installation. In very good condition. With machine clamps and tool holder SK-40 holder.

Key data: 2160 mm, 762 mm, 650 mm

For sale : Doosan vertical machining center type DNM 750L II with a Heidenhain i TNC 620 controller. Very nice machining center like new. Available at short notice. Includes tool holder and machine clamps. X-, Y- and Z-axis movement 2,160 762 x 650 mm. Cooling by the spindle with 70 bar high-pressure, chip conveyor with right ejection, Renishsow workpiece measuring system, etc.

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Computer cabinet, server cabinet, control cabinet, network server cabinet, computer housing-Manufacturer: RITTAL-Type: IT Solutions TE 7000-390-Field of view: 400 x 400 mm-Number: 1x cabinets available-Price: per piece-Dimensions: 600/600/H580 mm-Weight: 40 kg

Automatic drill, drill press, drill press, stand drill, pillar drill-Spindle mount: MK 3-Transmission-Automatic drill: with rapid traverse-Automatic drilling-Threading: automatic-Table size: 450 x 360 mm-Projection: 285 mm-Spindle stroke: 150 mm-Speed: 180-2000 rpm-Feed: 0.08-0.32 mm/rev-Dimensions: 900/1000/H2100 mm-Weight: 840 kg

Multi-spindle head, multi-spindle drill head, drilling gear- Joint multi-spindle head-max.: x drill-3x built-in drill collet: mm-min. Distance drill: mm-Weight: 11.3 kg-Articulated multi-spindle heads are variable tools: for various machining operations such as drilling, thread cutting, ountersinking, reaming, milling, turning, with which several holes can be machined at once.

Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

Multi-spindle head, multi-spindle drill head, drilling gear-Joint multi-spindle head-Max. x drill-7x drill built-in collet: mm-min. Distance drill: mm-Weight: 11.3 kgArticulated multi-spindle heads are: variable tools for various machining operations such as drilling, thread cutting, countersinking, reaming, milling, turning, with which several holes can be machined at once.

Magnetic drill, hand drill-Magnetic base: Magnetor type PS 32 L-Drilling machine: AEG type HBE-IV- Recording: MK2-Max. Drill: Ø 23 mm -Connection: 265V/200Hz-Dimensions: 700/300/H670 mm-Weight: 49 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Manufacturer: Artykuly Techniczne, adapter sleeve: Morse taper sleeve MK6/5-Type: PTPk-6/5-Dimensions: Ø 64/130 mm-Weight: 1.5 kg

Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 3x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Number: 1x drill heads available -Price: per piece -Dimensions: 140/75/H95 mm -Weight: 3 kg

Drilling machine, drill press, pillar drill, column drill -Condition: Working -Note: Clamping table repair-welded, see pictures -Manufacturer: Flott, column drill type SB 15 -Spindle mount: MK2 -Motor: 0.525 kW -Speed adjustment: via V-belt -Speed speeds: 215 - 400 - 730 - 1250 - 2300 - 4300 rpm -Table size: 220 x 220 mm -Spindle holder: MK2 with drill chuck -Travel: 360 mm -Spindle stroke: 55 mm - Throat: 295 mm -Column Ø: 100 mm -Accessories: collecting tray for coolant -Dimensions: 930/700/H1805 mm -Weight: 190kg -Handover: in current condition as seen

Drill press, bench drill, column drill, pillar drill-Manufacturer: TOS, high-performance column drilling machine type 40 TF / C-Motor: MEZ 2.2 kW-Speeds: 56 - 2240 rpm-Table size: 400 x 315 mm, travel 600 mm-spindle taper: MK4-Spindle stroke: 165 mm-Projection: 290 mm-Pillar Ø: 140 mm-Dimensions: 1200/650 / H1990 mm-Weight: 602 kg

handheld terminal, handheld control device, operating unit, control panel, operating panel, operating unit, operating device, programming device-Manufacturer: Siemens, Simatic S5 operator panel-Type: OP 393 III 6ES5393-OUA 15-Protection class: IP 50-Number: 2x control unit available-Price: per piece-Dimensions: 148/320/H55 mm-Weight: 0.7 kg/piece