boring mills and machining centers used for sale (3,193)

spindle diameter: 160 mmx-travel: 10.000 mmy-travel: 3.000 mmControl: ICEM 402 total power requirement: kWweight of the machine ca.: 80 tdimensions of the machine ca.: mStocknumber 1210050Type of machine CNC Floortype Boring MachineMake SKODAType W 160 CNCBuild in 1974/retrofitted in 2002Type of control ICEM 402Spindle diameter 160 mmX-stroke (mm) 10.000Y-stroke (mm) 3.000Z-stroke (mm) 1600W-stroke 1250 mmSpeeds (Rpm) 1 - 1.200Feeds (mm/R) 0,5 - 8.000 mm/min.Rapid feeds 8.000 mm/minTotal Power (KW) 180 KvAWeight 80 tonThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mmx-travel: 1200 mmy-travel: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 5,6x3,4x3,x7 mBrand: FemcoType: WBT-100SR2CNC brand: MitsubishiCNC model: Meldas C3Year of make: 1995-05Facing supportTable length: 1.440 mmTable width: 1.600 mmSpindle diameter: 100 mm øMachine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mmincl. right-angle milling head type HuronThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mmx-travel: 15000 mmy-travel: 4000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1210060Type of machine Floortype Boring machineMake SKODAType W160HCBuild in 1990Spindle diameter 160 mmX-stroke (mm) 15.000Y-stroke (mm) 4.000Z-stroke (mm) 1.600W-stroke 1.250Tool Taper Iso 50 Additional informationWith 3 floorplates 1880x5615 mm en 3x 1880x6400 mm3 millingheads and 1 support1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmarm length: 2000 mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 5,8x4,5x3,4 mBrand: BatliboiType: BPR-50Boiler radial drilling machineCapacity: 50 mmThroat depth: 2.000 mmSpindle taper: MK5Stroke: 350 mmDrilling Spindle: 75 mm øHead in degrees adjustableSpeed min: 16 RPMSpeed max: 800 RPMClamping surface: 2.610 x 1.050 x 260 mmMachine dimensions (lxwxh): 5.740 x 4.450 x 3.397 mmMachine weight: 6.570 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mmx-travel: 1000 mmy-travel: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: JuaristiType: MDR105 CNCCNC brand: HeidenhainCNC model: TNC145Year of make: 1983Table length: 1.000 mmTable width: 1.000 mmX: 1.000 mmY: 1.000 mmZ/W: 1.000 mmSpindle taper: ISO 50Spindle diameter: 105 mm øThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3100 mmswing diameter: 3600 mmturning height: 3600 mmcontrol: Fagor 8035 table load: 35 tturning speeds: 0,32 - 40 U/minmax. ram stroke: 3000 mmtable load: 35 tturning speeds: 0,32-40 U/mintotal power requirement: 70 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Code 71095 Description Pillar drill Make WEBO Modell Gradua 50 Serial No. 053 12 5 Year Table ( turnable ) 620 x 600 mm Base 620 x 600 mm Drilling capacity ( Steel 60 ) 60 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1250 mm Spindle speeds 8 steps 56 – 1250 rpm Spindle feeds 8 steps 0,06 – 0,84 mm/rpm Weight 1000 kg Motor 4,0 / 3,3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Optie 4 spindle drillinghead ( Price € 1.000,- ) Condition Machine is in good condition

Code 111263 Description Radial drilling machine Make CSEPEL Model RFH 100 / 3000 Serial No. 73089 Year of make 1975 Drilling Cap. in St. 60 / cast iron 100 / 120 mm Spindle taper 6 MK Spindle radius 3500 mm Min/max height spindle / top of base plate 440 – 2100 mm Arm traverse 1260 mm Spindle traverse 400 mm Number of speeds 21 steps Speed range 18 – 1800 rpm Feed range 18 0,0375 – 2,0 mm/rev. Working surface bed plate 3160 x 1550 mm Motor 15 kW – 380 Volts Total power 20 kVA Dimension 4390 x 1550 x 4130 mm (L x W x H) Weight of machine 14.000 kg Accessoiries Box 1000 x 1000 x 500 mm Automatic Clamping Cooling Condition Machine is in good condition

Code 111258 Description Rapid Radial Drilling machine Make DONAU Model DR – 24 Serial No. 2300 – 3 Year 1984 Drilling cap. in St. 60 in full 28 mm Drilling cap. in Cast Iron 35 mm Tapping cap. in St. 60 M 20 Tapping cap. In Cast Iron M 30 Spindle taper 3 MK Spindle radius max / min. 1000 / 400 mm Min/max height spindle / top of table 80 / 650 mm Arm traverse 450 mm Spindle traverse 175 mm Number of speeds 18 steps Speed range 45 – 2240 rpm Number of feeds 4 Feed range 0,075 – 0,15 – 0,3 – 0,45 mm/rev. Working surface table 1200 x 500 mm Motor 1,1 / 1,6 kW – 380 Volts Dimension W x D x H 1200 x 1600 x 1910 mm Weight 1400 kg Accessoiries screw cutting Condition Machine is in normal condition

Code 7418 Description 5 Spindle drilling machine Make Webo Modell B – 20 S/N Year 1975 Table 1740 x 360 mm Distance from centre of spindle to column 250 mm Spindle taper 2 MC Spindle stroke 190 mm Speeds 125 – 2000 rpm Motor 1,1 / 0,9 kW Volts 380 Volts Machine is in good condition.

Code 81221 Description Position Controlled Fast Radial Drilling machine Make DONAU Model DR 32 NC Serial No. 7107 Year 1984 Control Heidenhain TNC 145 Drilling cap. in St. 60 in full 32 mm Drilling cap. in Castiron GG 22 in full 45 mm Thread cutting in St. 60 M 26 Thread cutting in Castiron GG 22 M 36 Table 1120 x 800 mm X – Axis 800 mm Y – Axis 630 mm Z – Axis ( Quill ) 170 mm Max. distance Column-Spindel 750 mm Vertical movement Spindelhead 400 mm Spindle taper MC 4 Spindle speeds 45 – 2240 rpm Quill movement 170 mm Rapide feed 8000 mm/min Feeds 4000 mm/min Motor 2,2 / 4,0 kW 380 Volts Dimension 5,0 x 4,0 x 2,7 meters (L x W x H) Weight 3000 kg Accessoiries Position controlled in X – Y – Z ( Quill ) Coolant Machine can also be used without control Condition Machine ...

Code 71130 Description Radialbohrmaschine Make BREDA Modell R 55 x 1600 Serial No. 224 Year 1990 Capacity in Steel 60 55 mm Capacity in Cast Iron 70 mm Thread cutting in Steel 60 M 50 Thread cutting in Cast Iron M 65 Spindle taper 5 MC Spindle radius: max / min 1785 / 495 mm Spindle traverse 1290 mm Min / Max height spindle / top of base plate 505 - 1670 mm Arm traverse 855 mm Quill stroke 310 mm Number of speeds 12 Spindle speed range 30 - 1200 rpm Number of spindle feeds 8 Spindle feed range 0,06 – 1,0 mm/rev Baseplate size 2505 x 1000 mm Clampsurface base plate 1700 x 1000 mm Main motor 4,4 kW - 380 Volts Dimension of machine 2570 x 1000 x 2740 (3275) mm ( L x W x H ) Weight 4070 kg Accessoiries Box 1000 x 700 x 500 mm Coolant Hydraulic cl ...

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Co ...

UNUSED: Facinghead of a Wotan BF 160 Horizontal borer.

Code 71144 Description Horizontal table borer Make PFEIFER Model F 80 / 100 Serial number 2342 Year 1982 Spindle 100 mm Spindle taper 50 ISO Spindle out (W) 500 mm Table 1000 x 850 mm Cross (X) 1200 mm Longitudinal (Z) 800 mm Vertical (Y) 800 mm Distance table-spindle 0 x 800 mm Speeds 18 steps Spindle speeds 14 – 1500 rpm 16 Feeds 0,03 – 6,0 mm/rev Rapids 2500 mm/rev Rapids all directions ( X-Y-Z-W-B) Motor 7,5 kW 380 Volts Accessoiries X-Y-Z axis are BALLSCREWS Tool clamping Pendant control Condition Machine is in very good condition

Code 61080 Description Horizontal table borer Make UNION Model BFT 90/3 at Serial number 25 742 Year 1979 ( 1980 in use ) Control Heidenhain TNC 121 Spindle 102 mm Spindle taper ISO 50 Spindle out (W) 710 mm Table 1400 x 1250 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm Weight on table 3000 kg 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 3000 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Accessoiries 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead with 600 mm gap

Code 71145 Description Horizontal table borer Make UNION Model BFT 80 / 3-1 Serial number 18301 / 34 Year 1986 Spindle 80 mm Spindle taper ISO 40 Spindle out (W) 710 mm Table 1120 x 1000 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 2500 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Size L x W x H 5500 x 3200 x 2800 mm Weigth 9 ton Accessoiries Facing head Ø 460 mm with 180 mm stroke 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead Condition Machine is in good condition

Table boring mill UNION BFT 110 CNC Yom: 1997 Spindle diameter: 110 mm Travel: X: 1985 mm Y: 1620 mm Z: 1260 mm W: 710 mm Table surface: 1400 x 1600 mm Spindle taper: ISO 50 Control system: HEIDENHAIN TNC 426 Maximum table load: 6300 kg Feed rate: 5 m/min Working feed rate: 5 to 2500 mm/min Spindle speed: 6 to 1250 rpm Motor power: 33 kW Total power: 90 kW Table rotation: 360° Weight: 25400 kg

Spindle diameter: 110 mm Travel: X: 1985 mm Y: 1620 mm Z: 1260 mm W: 710 mm Table surface: 1400 x 1600 mm Spindle taper: ISO 50 Control system: HEIDENHAIN TNC 426 Maximum table load: 6300 kg Feed rate: 5 m/min Working feed rate: 5 to 2500 mm/min Spindle speed: 6 to 1250 rpm Motor power: 33 kW Total power: 90 kW Table rotation: 360° Weight: 25400 kg

PETECH WEW5050 pillar drill is designed for precise drilling of holes with a maximum diameter of 50 mm. Machining is performed by means of a work head with a reliable spindle. The work table with adjustable height and rotation around the column allows for convenient positioning of the workpiece and adjustment of the working position. The workspace is illuminated by a lamp mounted on the body of the PETECH WEW5050 machine. Technical specifications of the PETECH WEW5050 column drill press - maximum drilling diameter: 50 mm - workspace illumination

JAZON ZXB5150 vertical drilling machine was built in 2010 in Poland by JAZON Sp. z o.o. The machine is used for precision drilling of holes with a maximum diameter of 50 mm and threading up to 35 mm. The machining process is performed by means of a working head with a powerful spindle, which reaches a speed of up to 1600 rpm. The spindle feed and quill adjustment allows exact adjustment of the working parameters to the type of workpiece, ensuring high precision and repeatability of the performed operations. Workpieces are mounted on a large work table with a length of 800 mm and a width of 600 mm with three T-slots. The workspace is illuminated by a lamp mounted on the frame of the machine. All of this makes the offered JAZON JWK 50 ZXB5150 column drill press the ideal choice for locksmith workshops, tool shops and production plants. The total weight of the machine is 1350 kg. Technic ...

IXION AUERBACH TL 1004 deep hole drilling machine was built in 2004 in Germany by Ixion Auerbach Maschinenfabrik GmbH. The machine is designed for precision drilling of deep holes with a maximum depth of 1000 mm. Workpieces made of various types of material are machined fully automatically by means of precisely guided tools, which keeps the hole perfectly straight. All machining parameters are programmed in an advanced control system with many useful functions. The offer also includes an extensive equipment, consisting of, among others, a measuring probe, gun drills and a chip conveyor. The IXION TL1004 deep hole drilling machine weighs 3500 kg. Technical specifications of the IXION AUERBACH TL 1004 deep hole drilling machine - maximum drilling depth: 1000 mm - maximum hole diameter: 32 mm - minimum hole diameter: 6 mm - drilling capacity in 1.2312 steel (carbide gun drill): fi 25 ...

Heller MC16 Nr31-43487 BJ. 2009 Spindle revolutions 1/min 45-16000 SK40 Travel ranges mm X 630 Y 630 Pobmlb Saowfd Eusljrd Z 630 Travel speed mm/min 1-40000 Number of tools 80 Tool mm 70/150 (for free secondary spaces) Tool length mm 320 Number of pallets 2 Pallet dimensions 400 x 500 Max. load pallet kg 500 B Axis NC Control system Sinumerik 840D Probe Heidenhain Yes Power kVA 60 Machine No. 63

DEFUM WFM-100 boring machine was built in 1984 in Poland by the Dąbrowska Fabryka Obrabiarek DEFUM. The machine is designed for precision machining of workpieces with complex geometry and high weight. All machining processes, i.e. drilling, milling, boring and thread cutting, are performed on a stable work table by means of a powerful spindle with a diameter of 100 mm. The WFM 100 horizontal boring machine weighs 11000 kg. Technical specifications of the DEFUM WFM-100 drilling and milling machine - feed in the X/Y/Z axis: 1200/1000/600 mm - work table dimensions (L x W): 1100 x 1100 mm - maximum workpiece weight: 3000 kg - maximum spindle rotational speed: 1600 rpm - spindle diameter: 100 mm - spindle drive power: 18.5 kW - dimensions (L x W x H): 4610 x 3620 x 3110 mm - weight of the DEFUM machine: 11000 kg

SPINDEL 115 , ISO 50 , X,Y,Z - 2000 DRO TABLE 1400 X 1600

(showroom machine) Main Technical Data Number of Spindles: 4 spindles Gundrilling Diameter Range: 4 - 20mm Working Method of Tool: Rotating Working Method of workpiece: Rotating Clamping Method: Clamping Cone Max. Drilling Depth: 800mm Workpiece Max.Outer Diameter: 300mm Drilling Feedrate: 1-180mm/min Spindle Center Height: 220mm Spindle Distance: 158.75mm Control System: SIEMENS 828Dsl A.C. Spindle Motor Power: 2×15 kW Spindle Speed (Infinitely Variable): Max.5000 RPM Tailstock Spindle Speed: 70rpm Rapid Traverse Speed: 6000mm/min High Pressure Pump Motor Power: 4×7.5 kW Coolant Flow Rate: 4×46 L/min Filter accuracy: 20µm Max.Coolant Pressure:  ...

TOS ,W 100 , YEAR 1976, SPINDEL MORSEA

Key data: 100 mm, 1600 mm, 1250 mm

DRO , TABLE 1250 X 1250