sheet metal working used for sale (3,288)

: neu : ca. 12 Wochen ab Auftrags : Türkei : 22300 €: 428.16 €: 1550 mm: 4.5 mm: 4.5 mm: 3.5 mm: 4.5 mm: 3.5 mm: 3.5 mm: 2.5 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 3300 mm: 1150 mm: 1110 mm: 2370 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2019 : 090211 : prompt, Zwischenverkauf v : 5800 €: 1 : 2050 mm: 3 mm: 1.5 mm: 28 1/min: 2 °: 600 mm: 4 kW: 830 mm: 2520 mm: 1550 mm: 2150 mm: 1200 mm: 1450 kgmanual backgaugefoldup rear protectionfoot pedal2 support armsoperating manual with EC declaration of confirmity in GermanBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-maschinen.com/en/lp/used-machinesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Spanien : 35600 €: 679.96 €: 110 to: 610 mm: 5 : 40/20 bzw. 28/28 mm: 80 mm: 28 1/min: 600x15 / 400x20 mm: 152x152x13 mm: 50 mm: 13x52x90 mm: 9 kW: 2690 mm: 1400 mm: 2200 mm: 3300 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformation by diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmfast hydraulic, centring deviceoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISHOPTION:Kit € 970,00length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mmThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 20 mm: 20 mm: 12 mm: 15 mm: 13 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: gebraucht : 2021 : 90004 : prompt, Zwischenverkauf v : Türkei : 22600 €: 1 : 3100 mm: 4 mm: 42 1/min: 1.5 °: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsballs in the tabletilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMANBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-maschinen.com/en/lp/used-machinesThe data for this ad was created with ModulMWS  ...

: gebraucht : 1988 : 070008 : prompt, Zwischenverkauf v : Deutschland : 1200 €: 1 : 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mmwith brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 070009 : prompt, Zwischenverkauf v : Deutschland : 1600 €: 1 : 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mmwith brakewith 2 spare mandrelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 2 mm: 2 mm: 1.5 - 2 mm: 7 : 7 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic grip ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 1.75 mm: 2 mm: 6 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gripper system wi ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 1.5 mm: 2 mm: 1.5 - 2 mm: 5 : 5 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gr ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 18 mm: 18 mm: 12.1 mm: 15 mm: 13 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movem ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10900 €: 209.28 €: 1250 kg: 1300 mm: 450 - 550 mm: 400 mm: 80 mmmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlwith pneumatic downholerAlternatives (prices on request):Version without pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 12800 €: 245.76 €: 3.5 mm: 750 mm: 2.2 kW: 6,1 m/min: 2000 mm: 600 mm: 1400 mm: 750 kg: 200/1200 mmRahmen aus geschweißter StahlkonstruktionKlingen aus SpezialstahlLange Lebensdauer der Messer dank der konisch gelagerten WellenGetriebemotor mit BremseSystem zur Einstellung des Schnittdurchmessers mit motorisierter LeistungMobiles SteuerpultSystem zum Schneiden des InnendurchmessersAusrüstung gemäß CE RegulierungenThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:310 mmno. of straightening rolls:5 straightening roll diameter:25 mmdimensions (WxDxH):0,4 x 0,6 x 1,15 m

material width:210 mmno. of straightening rolls:6 straightening roll diameter:40 mmdimensions (WxDxH):0,45 x 0,6 x 1,1 m

weight of the machine ca.:620 kgdimensions of the machine ca.:1000 x 920 x 1550 mm

material width:500 mmcoil weight:2 x 2,0 tmaterial thickness:1,0 - 6,0 mmcoil internal diameter:350 - 420 mmcoil external diameter:1600 mmno. of straightening rolls:9 straightening roll diameter:50 mmnumber of draw-in rolls:2 speed:0 - 40 m/minmaterial thickness at 500 mm material width:3,5 mmpower requirement:17,5 kWDimensions (WxDxH):2,3 x 4,2 x 2,4 mstraightening machine:RM 5050.4/9 double decoiler:AH 2000/2/M snubber roll:pneumatic interchangeable jaws:130 mm expansion of the inner diameter

material width:300 mmcoil weight:0,5 tcoil internal diameter:420 - 520 mmcoil external diameter:1400 mmweight:0,6 tdimensions (WxDxH):0,8 x 1,2 x 1,7 mexpansion:pneumatic

material width:250 mmmaterial thickness:0,25 - 3,0 mmno. of straightening rolls:11 straightening roll diameter:30 mmspeed:6 - 60 m/minpower requirement:15,0 kWweight:1,1 tdimensions (WxDxH):1,1 x 1,7 x 1,5 mstriaghtening pressure automatic:hydraulic coil loof control:ultrasonic

material width coil line:600 mmcoil weight:2 x 3,5 tcoil internal diameter:460 - 530 mmcoil external diameter:1500 mmmaterial thickness coil line:0,5 - 3,0 mmno. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mmfeed length:0 - 500 mmpower requirement:10,0 kWweight:10,0 tdimensions of the coil line:8,8 x 4,0 x 2,55 mstraightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed

table-size: mmvertical movement: mm

material width:800 mmcoil weight:12,0 tcoil internal diameter:470 - 520 mmcoil external diameter:1500 mmmaterial thickness:0,4 - 2,5 mmno. of straightening rolls:8 straightening roll diameter:53 mmnumber of draw-in rolls:2 inlet roll diameter:160 mmspeed:35 m/minmaterial thickness at 150 mm material width:2,5 mmmaterial thickness at 650 mm material width:1,5 mmmaterial thickness at 800 mm material width:1,0 mmstraightening machine:RM 8-53/160-800 decoiler:HE 200-1000

material width:250 mmcoil weight:2,5 tcoil internal diameter:430 - 520 mmcoil external diameter:1650 mmmaterial thickness:0,5-6 mmno. of straightening rolls:7 straightening roll diameter:60 mmnumber of draw-in rolls:2 weight straightener:1,2 tweight decoiler:1,4 tdimensions straightener (WxDxH):1,2 x 1,2 x 2,0 mdimensions decoiler (WxDxH):1,8 x 1,8 x 2,3 mexpansion:hydraulic

material width:203 mmmaterial thickness:0,1 - 1,9 mmfeed length:101 mmweight:0,1 tdimensions (WxDxH):0,5 x 0,8 x 0,5 m

material width:450 mmmaterial thickness:1,0 - 14,0 mmcoil weight:10,0 tcoil internal diameter:470 - 520 mmcoil external diameter:1100 - 2000 mmno. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mmnumber of draw-in rolls:2 inlet roll diameter:160 mmmin. material width:100 mmspeed:15 m/minpower requirement:75,0 kWweight of decoiler:6,4 tweight of straightening machine:12,8 tdimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mmdimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mmstraightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450

material width coil line:600 mmcoil weight in kg:2 x 3000 kgcoil internal diameter:460 - 630 mmcoil external diameter:1500 mmmaterial thickness coil line:0,5 - 3,0 mmNumber of Straightening rolls:9 roll diameter:30 mmmaterial cross-cut:1200 mm²weight:9,5 tDimensions (WxDxH):4,3 x 2,6 x 2,6 mstraightening machine:30.600/9 double decoiler:Kohler, 3000.2 ausiliary drive:hydraulic lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic; motoric driven

material width:250 mmmaterial thickness:0,5 - 4,0 mmno. of straightening rolls:9 straightening roll diameter:60 mmnumber of draw-in rolls:2 power requirement:3,8 kWWeight:0,8 tDimensions (WxDxH):1,6 x 0,8 x 1,5 m

sheet width:400 mmplate length:500 mmplate thickness:4 mmtotal power requirement:0,5 kWPunching and Nibling machine with 6 x 3 mm nibling and 4 mm for cuting

material width:500 mmcoil weight:3,0 tmaterial thickness:0,2 - 2,5 mmcoil internal diameter:470 - 530 mmcoil external diameter:1400 mmno. of straightening rolls:9 straightening roll diameter:40 mmnumber of inlet and outlet rolls:4 material cross-cut:1200 mm²speed:1,5 - 30 m/mindimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 mweight decoiler:1,1 tdimensions straightener (WxDxH):3,3 x 1,3 x 2,7 mweight straightener:3,0 tstraightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic

sheet width:2000 mmplate thickness:1.8 mmControls:SIEMENS S7 PRESS DESIGN:. - frame design : H-frame :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - height above floor level:375 mmRAM:. - ram force:800 to - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /minRAM (MECHAN. PRESS):. - ram adjustment:350 mmTOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):3100 mm - Free passage between side columns (width):2560 mm - Free passage between side columns (height):1500 mmDECOILER:. - design : single coil :. - sheet width max:2000 mm - sheet width (min):400 mm - max. weight of coil:30 to - max. di ...