sheet metal working used for sale (3,278)

sheet width: / mmcoil weight: / tcoil internal dia.: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6200 mmplate thickness: 8 mmthroat: 60 mmdistance between columns: 6400 mmcutting angle adjustment: 0,5 bis 2 °total power requirement: 13 kWweight of the machine ca.: 19 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic straigntening, bending and cutting machine up to 16 mm, 5 payoffs, 5 hyperbolic rotors, max cutting length 1200 cm Auction-ID: A7-47311-8

Automatic stirrup bending machine, 1 payoff, double bending 8-12mm, single bending 8-14 mm Auction-ID: A7-47311-4

Automatic straigntening, bending and cutting machine up to 16 mm, 5 payoffs Auction-ID: A7-47311-6

Automatic straigntening, bending and cutting machine up to 16 mm, 5 payoffs, 5 rotors, max cutting length 1600 cm Auction-ID: A7-47311-7

Auction-ID: A1-47219-126

Auction-ID: A1-47219-165

Auction-ID: A1-47219-125

: neu : ca. 10 Wochen ab Auftrags : Türkei : 13800 €: 264.96 €: 1550 mm: 4 mm: 140 mm: 3,5 m/min: 2.2 kW: 2700 mm: 750 mm: 1000 mm: 1420 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS:hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 49900 €: 953.09 €: 2050 mm: 13 mm: 13 mm: 10 mm: 10 mm: 8 mm: 245 mm: 245 mm: 180 mm: 1,5 / 6 m/min: 7.5 kW: 4300 mm: 1600 mm: 1470 mm: 5450 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are rec ...

: neu : 2025 : 090069 : prompt, Zwischenverkauf v : Türkei : 720 €: 1 : 0.8 mm: 80 mm: 110 nm: 7 Stk.: 52 mm: 380 mm: 180 mm: 380 mm: 30 kg7 tool setsusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9684 : prompt, Zwischenverkauf v : Türkei : 830 €: 1 : 1.2 mm: 100 mm: 140 nm: 7 Stk.: 62 mm: 560 mm: 220 mm: 500 mm: 50 kg7 tool setsusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 24200 €: 464.64 €: 80 to: 750 mm: 40x14 mm: 40 1/min: 9 kW: 1700 mm: 1300 mm: 2050 mm: 1715 kghydraulic drivetable with gaugeuser manual in GERMAN and ENGLISHCNC options on requestWe have a big stock of punches and dies for immediate dispatchWE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 57100 €: 1079.19 €: 3200 mm: 2 mm: 1.2 mm: 3 mm: Motorisch : 4450 mm: 2200 mm: 1900 mm: 4500 kg: 1000 mmCNC control with tabular programming- 15,6", touchscreen controller on swivel arm- tabular programming by entering the axes values- open or drop hemming function- multi radius bending function as by pressing or by bending- programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length- piece counter- autorisiation with password- 128GB HDD allows almost unlimited data storage- remote service connection via WLAN- detailled alarm, tool and paramter pageMotorized drive (servo motors) of the upper and bending beam (Z and Y axes)Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration,with ball rollers in the sheet metal inserts ...

: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 62000 €: 1171.8 €: 3100 mm: 2 mm: Hydraulisch : 135 °: 5 kW: 4370 mm: 1770 mm: 1790 mmWITH VERTICAL UPPER BEAM MOVEMENT FOR THE USE OF FLAT AND HIGH TOP RAILShydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp flat upper rail 45° (in one piece)mechanical crowning adjustmentclamping force adjustmentupper beam verticalaccording to CE rules Optionen: sectionet upper rail, height 100 mm motorized back gauge, 800 mm with 2-axis touch controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16600 €: 318.72 €: 1050 mm: 6 mm: 30 1/min: 2.3 °: 750 mm: 7,5 kW: 800 mm: 530 mm: 1355 mm: 1720 mm: 1630 mm: 1230 mm: 2000 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 4 cutting edges on the lower blade1000 mm squaring arm with scale, T-slot, and flip stop2 support armsMechanical downholderManual cutting gap adjustment on the frontBalls in the tableCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-47219-127

: gebraucht : 2010 : 080065 : prompt, Zwischenverkauf v : Deutschland : 29800 €: 1 : 2040 mm: 3 mm: 2 mm: 4.5 mm: Motorisch : 1.5 kW: 1.1 kW: 3060 mm: 1650 mm: 1500 mm: 2730 kg: 750 mm: 140 mm: 50 °/sekCNC control ECT (Schneider Magelis)- Input of bending angle, depth stop dimension, lifting height, folding, precut- max. 36 bending angles can be saved per set- max. 510 sets can be saved- comfortable 7.5", color touch TFT monitor- Power mode for material-friendly operation- Soft start of the bending beam and the depth stop- Visual user guidance in the event of faults (diagnosis center)- Selection of different languages such as German, English ...CNC back gauge- Back gauge range 6 - 750 mm- Drive via belt- 6 stop fingers- support plates with brushesSectioned goose neck rail height 75 mmAdditional 10 mm rail on the bening beamFlat rail R 1 mmFlat rail R 2 mmMechanical drive via gear  ...

: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 7300 €: 140.89 €: 10 to: 185 mm: 150x8 mm: 450x900 mm: 150 mm: 60 mm: 10 mm/s: 10 mm/s: 1.1 kW: 915 mm: 900 mm: 450 mm: 1130 mm: 250 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 9340 €: 180.26 €: 48 mm: 570 mm: 410 mm: 1000 mm: 110 kg: 6 cm³: 48 x 3,5 mm: 11/2 x 3.68 mm: 54 x 1,5 mm: 50 x 4 mm: 48 x 2 mm: 48 x 2 mm: 60 x 3 mm: 64 x 2 mm: 64 x 2 mm: 60 x 2 mm: 50 x 4 mm: 32 mm: 45 x 16 stehend, 45 x 25 mm: 300 mm: 10 mm: 10 mm: 2/3 U/min: 1.5 kW3 phasedigital display of bendmaterial spring back compensationquick-change tooling system2 hexagonal tool holdersaccurate counterbending die positioningportable with base wheelsfootswitchusers manualALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST):SB 48M (single phase, 2 r/min) Model with TCPlus control on requestMACHINE-KIT WITH TOOLS (PRICES ON REQUEST):Art.Nr.maschinetuberadiusSB 48M K2DSB 48MGas inch2 x ØSB 48T K2DSB 48TGas inch 2 x Øtools:Ø 1/2", (21,3 mm), R46Ø 3/4", (26,9 mm), R56Ø 1", (33,7 mm), R67Ø 1", 1/4 (42,25 mm), R90 ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 106340 €: 2009.83 €: 150 mm: 1000 mm: 1900 mm: 1475 mm: 2700 kg: 170 cm³: 150 x 7,1 mm: 6 x 7,11 mm: 150 x 9 mm: 141,3 x 6,55 mm: 141,3 x 6,55 mm: 168,3 x 9 mm: 168,3 x 9 mm: 64 x 6 mm: 88,9 x 3,65 mm: 110 mm: 150 x 45 stehend, 150 x 6 mm: 800 mm: 100 mm: 10 mm: 1 U/min: 15 kWTCPlus Control with 7 TouchscreenProgrammable bending speed for each individual bendPossibility to bend left and rightUsers manaulThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 8286 : prompt, Zwischenverkauf v : Türkei : 2990 €: 1 : 2040 mm: 0.8 mm: 70 °: 2400 mm: 750 mm: 850 mm: 290 kgstraight upper toolmoveablemanual cutting deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 19600 €: 376.32 €: 55 to: 500 mm: 5 : 40/10 bzw. 20/20 mm: 20 mm: 37 1/min: 300x15 / 200x20 mm: 10x42x90 mm: 5 kW: 2100 mm: 1160 mm: 2090 mm: 1750 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformationby diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmfast hydraulic, Ankörnvorrichtungoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISHOPTION:Kit € 970,00length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 8700 €: 167.91 €: 250 mm: 6 mm: 3 mm: 25 1/min: 90 °: 4 kW: 950 mm: 780 mm: 1115 mm: 585 kgHydraulic driveAutomatic adjustment of the blade gap2 downholder2 gauges angle adjustableProtection cover, acrylic glassFoot pedalWaste boxAccording to ",CE", regulations User manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2018 : 070033 : prompt, Zwischenverkauf v : Türkei : 20310 €: 389.95 €: 1 : 0.6 - 4 mm: 300 mm: 900 mm²: 80 mm: 10 Nm: 2.62 kW: 1000 mm: 800 mm: 1400 mm: 330 kgDEMO MACHINEhelical gear box Wattdrivepneumatic equipment Festocontrol SCHNEIDER with touchscreen2 driven rollsremote service modulehand wheel Euchneroperating manual in German with EC conformity declarationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7100 €: 137.03 €: 1 : 1 : 1050 mm: 3 mm: 90 mm: 6 m/min: 1.1 kW: 1630 mm: 700 mm: 1200 mm: 480 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rollHARDENED ROLLStiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 9502 : Türkei : 2100 €: 1 : 1050 mm: 2 mm: 75 mm: 1930 mm: 700 mm: 1160 mm: 300 kgMINT CONDITION3 rollsasymmetric rolls - prebendinglongitudinal grooves in lower and lateral rollInfeed of the lower roller by a central lever - with gear reductionmachine standuser manual in GERMAN orENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.