sheet metal working used for sale (3,276)

Transmission: Electric, Pneumatic, with Siemens Motor Auction-ID: A1-43917-21

Auction-ID: A1-43917-27

Model: Swagelok MS-HTB-6M Type: Hand Tube Bender Tube Ø: 6 mm Bending radius: 15 mm Material: High-quality steel, ergonomic handle Application: Precise bending of pipes for hydraulics, pneumatics and process plants Special features: Exact angle control Minimizes ovalization and wrinkling Compatible with Swagelok pipe fittings Weight incl. packaging approx. 4kg Auction-ID: A1-44066-1033

X/Y-Axis Feed Rates: 2500/1250 mm Software: JETCAM Tools Brush Table Maximum Hydraulic Pressure: 300 bar Power Supply: 3 x 400 V; 50 Hz Auction-ID: A1-43934-6

without further information Auction-ID: A1-43301-164

Working Length: 2050mm; Sheet thickness: 2mm; for more details see photos of nameplate Auction-ID: A7-44480-65

on mobile stand Auction-ID: A1-43301-250

sheet width - max.: 5-150 mmsheet width - max.: 5-150 mmcoil weight: 2,0 tcoil weight: 2,0 tBelt thickness: 0,2-1,5 mmBelt thickness: 0,2-1,5 mmband speed: 0-20 m/minband speed: 0-20 m/mindriving torque: 290 Nmdriving torque: 290 Nmtable-size: 1500 mmtable-size: 1500 mmControl: Siemens-Leicht Control: Siemens-Leicht range L-W-H: 2.000 x 1.500 x 1.900 mmtotal power requirement: 0,75 kWtotal power requirement: 0,75 kWweight of the machine ca.: 0,6 tweight of the machine ca.: 0,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 4,5 mmpre-bending: 4,0 mmmin. dia.: 210 mmroll diameter: 140 mmweight of the machine ca.: 1530 kgdimensions of the machine ca.: 3220x1200x900 mmStandard features:- Central rollers via electric motor, planetary reduction gear andGear drive driven- Swivel top roller- Main engine with brake device- Conical bending device- Mobile controller and foot pedal- CE mark / Declaration of ConformityAdditional equipment:- motorized rear roller adjustment- Digital display for back roller- induction hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 0400 mmcoil weight: 1,50 tmaterial thickness: mmnomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mmrange of expansion ca.: 460 - 530 mmcoil outside - diam. ca.: 1500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 1 : 4010 mm: 1.25 mm: 2 mm: 1.25 mm: 4 : 4 : 1130 mm: 180 mm: 915 mm: 2.2 kW: 4550 mm: 5200 mm: 1435 mm: 1460 mm: 2600 kghydraulic drivestandard controladditional rail on the bending beam2x foot pedalremoveable material supportsafety equipment accoring to the control rules BG GermanyStands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions.3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST.OPTIONAL EQUIPMENT: manual rotary shear price on request powered rotary shear St/Al 1,25/1,5 mm price on request powered rotary shear with cutting head ",S", St/Al 1,5/2,0 mm price on requestCONTROLBM 10 7-inch display, presetting of up ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 853 €: 20 - 76,1 mm: 3 mm: 2.5 mm: 7 kgThe ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm.Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment.ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 €: 831.81 €: 1550 mm: 12 mm: 12 mm: 10 mm: 10 mm: 8 mm: 220 mm: 200 mm: 160 mm: 1,5 / 6 m/min: 5.5 kW: 3900 mm: 1150 mm: 1250 mm: 3600 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are rec ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 39400 €: 752.54 €: 2540 mm: 2.5 mm: Hydraulisch : 135 °: 3850 mm: 1700 mm: 1800 mm: 3400 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 46300 €: 884.33 €: 2050 mm: 11 mm: 11 mm: 9 mm: 9 mm: 7 mm: 220 mm: 220 mm: 160 mm: 1,5 / 6 m/min: 5.5 kW: 4400 mm: 1150 mm: 1250 mm: 4080 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recom ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 38900 €: 742.99 €: 64 mm: 4000 mm: 950 mm: 1250 mm: 850 kg: 10 cm³: 64 x 3,3 mm: 2 mm: 60,3 x 2,2 mm: 60 x 60 x 2 mm: 40 x 60 x 4 mm: 60 x 40 x 3 mm: 76 mm: 200 mm: 20 mm: 210 °: 4.2 kW: 15 lwith mandrel 3 m lengthFST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slideProgrammable C-axis bendingPositioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stopsMultifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu30 programs of 9 bends each can be memorizedScreen for digital display for carriage feed (Y1 Axis) and rotation (B Axis)External pressure gauges for easy setting of the system and closing pressureVariable bending speed up to 4 rpm (Inverter vers ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 20 mm: 20 mm: 12 mm: 15 mm: 13 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : 2024 : 9729 : prompt, Zwischenverkauf v : Türkei : 28450 €: 488.96 €: 1 : 25600 €: 1550 mm: 7 mm: 7 mm: 4.5 mm: 4.5 mm: 3.5 mm: 150 mm: 150 mm: 130 mm: 1,5 / 6 m/min: 4 kW: 3750 mm: 960 mm: 1100 mm: 2500 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:(time of deliver with options approx. 10 weeks)Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can  ...

Largest blow impact: 40kp/mm2 Auction-ID: A1-43917-10

: : : total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. loading weight 350 kg, suitable for lot 70 Auction-ID: A1-44095-78

working width: 1500 mmworkpiece width - max.: 0,5 - 50 mmdimensions: 3300 x 1500 x 1800 mmfeed stepless: 0-4 m/mintotal power requirement: 20,4 kWweight of the machine ca.: 2800 kgThe SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts.The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant ...

Hydraulic press for crimping hydraulic hoses, equipped with all the necessary dies for 0 hoses. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-43970-60

sheet width: 3050 mmplate thickness: 6 mmrear stop: 1000 mmcutting angle: 0,5 - 3 °down holder: 18 Stkno. of strokes: 9-17 Hub/mintotal power requirement: 7,5 kWdimensions of the machine ca.: 3800 x 2000 x 1600 mmweight: 4500 kgEquipment:- electric backgauge- electric cutting angle adjustment- manual cutting gap adjustment- SP 9 control unit- Safety guard behind the machine incl. light barrier- front finger guard- 1x side stop- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 12 mmrear stop: 1000 mmcutting angle: 0,5 - 3,0 °down holder: 18 Stkno. of strokes: 7 - 14 Hub/minoil volume: 350 ltotal power requirement: 22,5 kWdimensions of the machine ca.: 4200 x 2000 x 2250 mmweight: 8500 kgEquipment:- Haco SP 8 control unit- electro-hydraulic guillotine shears - guided by a guide rail- electric backgauge- electric cutting gap adjustment- electric cutting angle adjustment- 1x side stop- front finger guard- rear safety device ( light barrier )- emergency stop device- 1x freely movable foot switch- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: max. 10 - 15 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °back stop - adjustable: 6.0 - 750 mmControl: ELGO P9521 total power requirement: 18.5 kWweight: 6300 kgrange L-W-H: 3900 x 2300 x 1630 mmFeatures:- Robust electro-hydraulic swing beam shear- ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s- 1x stable side stop With T-slot, flip-stop, and millimeter scale- 2x stable front support arms- Electric cutting length limiter Cutting length limiter to increase the stroke rate/min.- Manual cutting gap adjustment Centrally operated on the right side stand- Front support plates- Front finger/interference guard- Inching operation with push buttons on the left c ...

Suitable for Lot 1 Auction-ID: A1-44095-3

working width: 1000 mmworkpiece width - max.: 0,5 - 50 mmsandingbelt width: -- mmweight of the machine ca.: 2,5 tWith the SBM-L 1000 G1S2, which works in the dry process, in alternating operationSteel, stainless steel and aluminum can be machined. She deburrs and roundsthe edges on the outer and inner contours of punched, laser, fine plasma orwater jet cut workpieces with a thickness of up to 50 mmon both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatterand slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottomUnderside, process the sheets on both sides at the same time. hereAll edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces andedit twice. All pairs of aggregates can be switched on/off separately de ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16100 €: 309.12 €: 2050 mm: 3 mm: 35 1/min: 1.5 °: 750 mm: 3 kW: 800 mm: 520 mm: 2720 mm: 1575 mm: 1230 mm: 1900 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 2 cutting edges on the lower blade800 mm squaring arm with scale2 support armsMechanical downholderManual cutting gap adjustment on the frontCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 19800 €: 380.16 €: 1550 mm: 6 mm: 30 1/min: 2.3 °: 750 mm: 7,5 kW: 800 mm: 530 mm: 1855 mm: 2220 mm: 1630 mm: 1230 mm: 2900 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 4 cutting edges on the lower blade1000 mm squaring arm with scale, T-slot, and flip stop2 support armsMechanical downholderManual cutting gap adjustment on the frontBalls in the tableCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.