sheet metal working used for sale (3,276)

1300 ton x 14,400mm Cybelec ModEva 125 Y1 / Y2 / X / R

4-rolls Kramatorsk plate bending machine Ultimate tensile strength of material: 500 MPa (50 kg/mm²) Yield strength – cold bending: 250 MPa (25 kg/mm²) Yield strength – hot bending (primary): 100 MPa (10 kg/mm²) Yield strength – hot forming (secondary heating): 45 MPa (4.5 kg/mm²) Elongation at cold state: ±18% Maximum sheet width: 4000 mm Max sheet thickness – cold, without pre-bend: 71 mm Max sheet thickness – cold, with pre-bending: 63 mm Max sheet thickness – hot forming: 150 mm Minimum bending radius – cold: 560 mm Minimum bending radius – hot: 600 mm Maximum radius for closed bending (curled edge): 1000 mm Main motor: 160 kW Weight: 730 tons

4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.

: neu : 2025 : 090121 : prompt, Zwischenverkauf v : Türkei : 3100 €: 1 : 1.2 mm: 100 mm: 140 nm: 8 Stk.: 62 mm: 0.75 kW: 32 1/min: 900 mm: 450 mm: 1350 mm: 135 kgHaevy duty cast iron main frameBrake motorFoot pedalAdjustable lower roll8 set of rollsComplete with standUser manual in ENGLISH or GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 57100 €: 1079.19 €: 3200 mm: 2 mm: 1.2 mm: 3 mm: Motorisch : 4450 mm: 2200 mm: 1900 mm: 4500 kg: 1000 mmCNC control with tabular programming- 15,6", touchscreen controller on swivel arm- tabular programming by entering the axes values- open or drop hemming function- multi radius bending function as by pressing or by bending- programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length- piece counter- autorisiation with password- 128GB HDD allows almost unlimited data storage- remote service connection via WLAN- detailled alarm, tool and paramter pageMotorized drive (servo motors) of the upper and bending beam (Z and Y axes)Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration,with ball rollers in the sheet metal inserts ...

: gebraucht : 2021 : 90004 : prompt, Zwischenverkauf v : Türkei : 22600 €: 1 : 3100 mm: 4 mm: 42 1/min: 1,5 °: 750 mm: 7,5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsballs in the tabletilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11400 €: 218.88 €: 1050 mm: 5 mm: 130 mm: 3,5 m/min: 2.2 kW: 2200 mm: 750 mm: 1000 mm: 1200 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS:hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9722 : prompt, Zwischenverkauf v : Türkei : 16600 €: 318.72 €: 1 : 2050 mm: 3 mm: 130 mm: 3,5 m/min: 2.2 kW: 3200 mm: 750 mm: 1000 mm: 1500 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorHARDENED ROLLSmanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in GERMANOPTIONS:(time of delivery with options approx. 8 weeks)Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6700 €: 129.31 €: 1550 mm: 2 mm: 90 mm: 6 m/min: 1.5 kW: 2130 mm: 700 mm: 1200 mm: 545 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMAN or ENGLISHOPTIONS:powered back roll EUR 1.000,-digital readout EUR 1.100,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6400 €: 123.52 €: 1270 mm: 2.5 mm: 90 mm: 6 m/min: 1.1 kW: 1850 mm: 700 mm: 1200 mm: 520 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16600 €: 318.72 €: 1050 mm: 6 mm: 30 1/min: 2.3 °: 750 mm: 7,5 kW: 800 mm: 530 mm: 1355 mm: 1720 mm: 1630 mm: 1230 mm: 2000 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 4 cutting edges on the lower blade1000 mm squaring arm with scale, T-slot, and flip stop2 support armsMechanical downholderManual cutting gap adjustment on the frontBalls in the tableCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 174688 €: 3301.6 €: 3 kW: Manueller Tisch : 16 mm: 8 mm: 8 mm: 5 mm: 8 mm: 3060 x 1530 mm: 3060 mm: 1530 mm: 140 mm: 3048 x 1524 mm: 160 kg/m²: 90 m/min: 90 m/min: 127 m/min: 14 m/s²: +/- 0,05 mm: +/- 0,05 mmThe HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible.The manually extendable table is moved out of the side of the machine for loading and unloading.The cutting head has automatic focus adjustment.This makes the system a particularly economical, fast and very easy to operate production machine.The system consists of the following components:Manual loading and unloading tableEncapsulated cutting room with protective glazingCNC graphic control with touchscreenLaser source Brilase Premium DRM-8 F150Cutting head with automatic focu ...

: gebraucht : 2023 : 5542 : prompt, Zwischenverkauf v : Italien : 11600 €: 1 : 1300 mm: 150 mm: 150 mm: 250x350 mm: 945 mm: 0.75 kW: 1400 mm: 1000 mm: 1450 mm: 300 kgDemo machine / mint conditionNet price (price for new machine € 13.600,00)Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum.The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm.The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° an ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98600 €: 1863.54 €: 3100 mm: 16 mm: 16 mm: 13 mm: 16 mm: 14 mm: 12 mm: 300 mm: 300 mm: 240 mm: 50 mm: 1140 mm: 18.5 kW: 5310 mm: 1660 mm: 1140 mm: 11100 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 32480 €: 620.37 €: 1550 mm: 9 mm: 9 mm: 7 mm: 7 mm: 5 mm: 180 mm: 180 mm: 150 mm: 1,5 / 6 m/min: 5.5 kW: 3900 mm: 1150 mm: 1250 mm: 3250 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT (PRICES ON REQUEST):infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad  ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 4010 mm: 2 mm: 2 mm: 1.5 - 2 mm: 5 : 5 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gripper  ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 36000 €: 687.6 €: 85 to: 500 mm: 5 : 40/15 bzw. 24x24 mm: 450x15 / 450x18 mm: 475 mm: 130x130x13 mm: 45/40 mm: 12 mm: 200x12 mm: 9.2 kW: 2300 mm: 1200 mm: 2100 mm: 2400 kghydraulic drive2 foot pedals for independant working on punching and section stationbending unit with 2 dies, V40 and V70flat steel stationWITH DEVICE FOR REDUCING DEFORMATIONangle iron station with round and square bar cuttinghydraulic downhold for flat- and angle stationtriangular notching station with table and gaugepunching station with table and gaugegauge 1000 mm with contact switch, for angle / flat steel stationoperating manual in German and EnglischThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2012 : 9690F : prompt, Zwischenverkauf v : China : 690 €: 1 : 100 mm: 3 mm: 90 °: 90 kgBeidseitig verstellbare AnschlägeFingerschutzAusrüstung gemäß CE VorschriftenThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 56200 €: 1062.18 €: 3100 mm: 3.5 mm: Hydraulisch : 135 °: 4300 mm: 1770 mm: 1890 mm: 4220 kgNC control for bending anglemanual back gauge 600 mmhydraulic drivenvertical movement of upper beamsegmented bladesegmented goose neck rail 30°, 110 mm with quick tool change systemone piece flat bottom bar 30 mmaccording to CE rules(sample photo showing model V-AMH 2535 2 axes NC control Schneider)OPTION:2 axes NC control with touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2017 : 8063 : prompt, Zwischenverkauf v : China : 1710 €: 1 : 1020 mm: 1.5 mm: 135 °: 1348 mm: 850 mm: 1175 mm: 285 kgupper beam with sectioned railbooster cylinderuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 209800 €: 3371.76 €: 178400 €: 20 to: 2000x1250 mm: 2000 mm: 1250 mm: 90 m/Min: 70 m/Min: 114 m/Min: 1100 1/Min: 375 1/Min: 1200 1/Min: 6 mm: 3 mm: 3 mm: 1.5 mm: 27 : 0,1 mm: 0,05 mm: 30 U/Min: 150 U/Min: 100 kg: 940 mm: 6 bar: 88.9 mm: 7.5 kW: 5600 mm: 6600 mm: 4200 mm: 6200 mm: 2310 mm: 11000 kgSPECIAL CAMPAIGN UNTIL 23.12.2025Control unit, Siemens Sinumerik 840 D SLCAD-CAM softwareProgramming on the control panelRemote diagnostic functionAutomatic clamp positioningNetwork Ethernet communicationAutomatic tool lubricationUPS for control panelMovable scrap boxBrush tableOil CoolerUSB DriverCommand pedalWeb cam for serviceReposition on X axisAlignment Tools for Index Stations C+B StationManual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm 2 x B-Station Index: 12,8 ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 6900 €: 133.17 €: 2 mm: 700 mm: 1.1 kW: 7,5 m/min: 1400 mm: 400 mm: 1150 mm: 360 kg: 120 / 1.000 mm: 280 mmgearbox motor with brakefootpedalcentral lubricationOPTIONAL EQUIPMENT:pneumatic upper roll feedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1 TOOLS FOR ALL TYPES OF BENDINGWILA&apos,s versatile New Standard Tooling program offers a wide range of choices. They differ greatly in terms of function, geometry and the clamping method. WILA provides a wide range of New Standard tools for air bending as well as bottom bending. New Standard tools are modular and available in several standard lengths, which makes it possible to quickly achieve virtually any bending length.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 €: 1398.6 €: 1350 mm: 0,5 - 170 mm: 1370 x 2200 mm: 4000 m³/h: 200 mm: 6 bar: 78 (+/-2) dB: 1750 mm: 2100 mm: 2180 mm: 2000 kgWITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOPMachine made of stress-free welded steel construction for stable and rigid structure.Work table with motorised height adjustment via 4 synchronised spindles.Independent drive motors for each work group.Bonnets for extraction inside the machine, one per station.Touch screen for-Automatic star-delta connection of the main motors- Analogue ammeter for each group- Digital display for sheet thickness with decimal point tolerance- Material thickness adjustment (+/- 0.1 mm)- Machine condition monitoring with alarm messagesFEEDING SYSTEMRobust steel structure, wear-resistant surface.Vacuum conveyor belt on requestVariable feed speed via frequency co ...

: gebraucht : 1968 : 9581 : 3200 €: 1 : 1050 mm: 2 mm: 150 1/min: 500 mm: 1500 mm: 1700 mm: 1100 mm: 800 kgman. back gauge with hand wheel and scaleuser manual in GERMANdidn&apos,t according to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 30800 €: 588.28 €: 85 to: 300 mm: 5 : 40/15 bzw. 24x24 mm: 450x15 / 450x18 mm: 475 mm: 130x130x13 mm: 45/40 mm: 12 mm: 200x12 mm: 9.2 kW: 2300 mm: 1200 mm: 2100 mm: 2400 kghydraulic drive2 foot pedals for independant working on punching and section stationbending unit with 2 dies, V40 and V70flat steel stationWITH DEVICE FOR REDUCING DEFORMATIONangle iron station with round and square bar cuttingtriangular notching station with table and gaugepunching station with table and gaugegauge 1000 mm with contact switch, for angle / flat steel stationoperating manual in German and EnglischThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 070008 : prompt, Zwischenverkauf v : Deutschland : 1200 €: 1 : 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mmwith brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 9000 €: 173.7 €: 36 to: 170 mm: 3 : 27x10 mm: 15 mm: 24 1/min: 350x6 mm: 80x8 mm: 2.2 kW: 1100 mm: 800 mm: 1400 mm: 485 kg3 working stationsfoot pedalhydraulically drivenoil filledtable at punching stationwith gaugeuser manual in GERMAN and ENGLISH FLAT STEEL SHEAR flat steel mm 200 x 13 with small deform. mm 350 x 6 blade lenght mm 356 round bars mm 30 square bars mm 25 working hight mm 980&,nbs ANGLE IRON SHEAR L profiles 90° mm 80 x 80 x 8 L profiles 45° mm 50 x 50 x 6 round bars (optional) mm 35 square bars (optional) mm 30&,nbs NOTCHING STATION (optional) sheet mm 8 L profiles mm 60 notching depths mm 53 PUNCHING STATION max. punching cap. to 36 max. sheet diam. mm 27 x 10 gap mm 170 stroke mm 28 working height mm 980The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160788 €: 2583.63 €: 136700 €: 3 kW: - : 12 mm: 6 mm: 6 mm: 3 mm: 6 mm: 26,5 kW: 250 mm: 16 mm: 160 x 160 mm: 200 x 150 mm: 6000 mm: 58 kg/m: +/- 0,2 mm: +/- 0,05 mm: rund, quadratisch, rechte : 40 m/min: 94 m/min: 30 m/min: 510 °/sThe machine consists of the following components:- Encapsulated cutting room with protective glazing- CNC graphic control with touchscreen- Laser source Brilase 3 kW Premium incl. chiller- Cutting head with automatic focus adjustment- manual loading-manual unloading table 3 m- Positioning laser- Central lubrication- slug car- CAD/CAM software with autonesting- Work area lightingPRICE FCA TÜRKIYEOPTIONS:Suction unit with filtersSemi-automatic loading systemManual unloading table 6 m with conveyerDurma cloud licenseLasersources with 4 or 6 kW on requestThe data for this ad was created with ModulMWS - the so ...

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7100 €: 137.03 €: 1 : 1 : 1050 mm: 3 mm: 90 mm: 6 m/min: 1.1 kW: 1630 mm: 700 mm: 1200 mm: 480 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rollHARDENED ROLLStiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.