sheet metal working used for sale (3,302)

HAEUSLER Dishing press:- Max. force 1000 Ton- Retraction force 82.5 Ton- Approach speed 260 mm/Sec- Working 10 - 30 mm/Sec- Return speed 370 mm/Sec- Pressure 253 Bar - Distance between column 9000 mm- Dimensions table plate 1500 x 1500 mm- Max Work piece diameter 8700 mm- Thickness at yield 450 N/mm2 90 mm - Manipulator:- Max. dimanions 8700 x 90 mm- Min. dimensions table 1500 x 1500 = 3200 mm- Min. dimensions table 700 x 700 = 2200 mm- Work piece weight 42.000 Kg- Travelling speed 158 M/Sec- Power 165 kW- Weight 43000 Kg- Optional Dishing Dies (Gray GG-25)RUW 925 with    1500 diameter x R   950 – 1300 mmRUW 1205 with 1500 diameter x R 1305 – 1700 mmRUW  1520 with 1500 diameter x R 1705 – 2200 mmRUW 1905 with 1500 diameter x R 2205 – 2800 mmRUW 2395 with diameter 1500 x R 2805 – 3500 mmRUW 2885 with diameter 1500 x R 3505 – 4300 mmRUW 3515 with diameter 1500 x R 4305  ...

HAEUSLER FLANGING MACHINE HBM-HY 8700 x 90 mm - Forming and Flanging rollers:- inclines positon 0 - 25 Degrees- Rotation sopeed 0 - 200 M/Min- Rapid adjustment speed 2500 mm/Min- Crawling speed 0 - 1200 mm/Min- Sleeve hydro mechanical rapid speed 6000 mm/Min - Infeed carriage:- Work piece weight 42.000 Kg- Max. dished head 8300 mm- Min. dished head 1900 mm- Speed 20 M/Sec- Centering Automatic - Data of Workpiece:- Cold 360 N/mm2 45 mm- Hot 360 N/mm2 90 mm- Min Knuckel Radius 100 mm- Max. Knuckel Radius 1200 mm- Min thickness dished 10 mm- Head diameter without device 2600 mm- Head diameter with device       1900 mm- Length off straight flange at flanged head 3,5 x thicness = 140 mm - Hydraulic tank 2000 Liter- Power 350 kW- Form roller changing device in combi with lifgting sleeve- Auxiliary device for flanging heads from 1900 - 2600 x 25 mm thickness- Measuring device outer diam ...

chamfer lenght: 1530 mmplate thickness: mmdistance between columns: 1530 mmpressure: 40 tstroke length max.: 300 mmtravel -x axis: 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tube bending machine, Macri Provar, max diam 45 Auction-ID: A1-50595-60

Used and unchecked; viewing desired Auction-ID: A1-50737-139

sheet width: 1640 mmplate thickness: 3,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,60 tdimensions of the machine ca.: mManual and automatic bending cycles possibleBending angle adjustable via potentiometerClamping beam lift and material thickness selectable via switchesManual backgauge with spring fingersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3240 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 5,00 tdimensions of the machine ca.: mUpper beam stroke: 350 mmManual and automatic bending cycles possibleBending angle adjustable via potentiometerUpper beam stroke height and material thickness selectable via DIP switchesCentral lubrication systemOperating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1040 mmplate thickness: 6,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 3,50 tdimensions of the machine ca.: mMotorized 2-speed backgauge with digital display up to 1000 mmSide gauge and table extensionsCutting length limiterCutting edge illuminationSharpened bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1040 mmplate thickness: 2,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: ca. 0,900 tdimensions of the machine ca.: mMotorized backgauge up to 750 mmPneumatic sheet supportCutting gap adjustmentSide gaugeSharpened bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1040 mmplate thickness: 2,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 0,800 tdimensions of the machine ca.: mManual backgauge, adjustable from the front up to 550 mmSharpened bladeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 630 mmworkpiece width - max.: 1,0 - 100 mmsandingbelt width: 650 mmsandingbelt length: 1900 mmdimensions: 1320 x 2250 x 2200 mmweight of the machine ca.: 2500 kgDescription:- Universal, compact entry-level machine for machiningsteel, stainless steel, and aluminum- The continuously adjustable sanding belt speed allows you to reliably removecutting burrs and achieve a smooth surface finish- With our flap-disc unit, you can achieve uniform edge rounding on all sidesand a non-directional finish- The speed-controlled rounding unit enables different rounding depths andoptimal processing for every application- 150 mm wide magnetic track The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3200 mmplate thickness: 4.0 mm STdistance between columns: 3300 mmupper clamping bar adjustment: 400 mmAdjustment folding beam: 80.0 mmpivoting angle: 180 Gradclamping capacity max.: 200 KNrear stop: 10.0 - 1600 mmoil volume: 160 Litertotal power requirement: 9.8 kWweight: 8500 kgrange L-W-H: ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition ()- inspected condition - machine video -https://www.youtube.com/watch?v=RY-amZooeX4Equipment:- robust CNC folding machine- CNC control unit - CYBELEC DNC 80 PP swiveling control panel, front right 2D graphic display for visualization and multi-simulation 2D graphic programming easy operation- CNC motorized backgauge travel range 10.0 - 1,600 mm pneumatic / retractable gauge fingers adjustment speed max. 250 mm/sec. rear sheet support table with brushes- motorized lower beam adjustment (S-axis)- electro ...

sheet width: 2020 mmplate thickness: 3.0 mmthickness at Niro-steel: 2.0 mmbending angle max.: 135 °stroke of upper beam: 250 mmSwing beam adjustment: 80.0 mmControl: POS 2000 back stop - adjustable: ca. 1.000 mmtotal power requirement: 6.0 kWweight of the machine ca.: 3775 kgdimensions of the machine ca.: 3850 x 2250 x 2250 mm Original price at the time: approx. 70.000 Machine from a maintenance workshop Special price upon request (!) Features:- Robust, electric-motor-driven CNC swivel bending machine - dynamic, high-performance drive motors- SCHRáDER POS 200 CNC control unit touchscreen control panel fast programming of individual parts programming of bending sequences Tool and bending program library Graphical and numerical display - Swiveling control panel, front right- CNC electric-motor-driven material/backgauge With rear sheet metal support surface (stainless steel)- CNC elec ...

: neu : 2024 : 9741 : prompt, Zwischenverkauf v : Türkei : 6500 €: 125.45 €: 1 : 1050 mm: 3 mm: 90 mm: 6 m/min: 1.1 kW: 1630 mm: 700 mm: 1200 mm: 480 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1350 mmplate thickness: 4.0 mmthickness at Niro-steel: 2.0 mmno. of strokes: max. 35 Hub/mincutting angle: 2.0 Gradtable height: 945 mmdistance between columns: 1361 mmControl: CIDAN / SIEMENS engine output: 5.5 kWweight of the machine ca.: 1400 kgrange L-W-H: 2200 x 2000 x 1550 mmFeatures:- robust / motorized swing cut guillotine shears- unbreakable and torsion-free welded steel construction- compact and clear machine construction- NC electro-motorized backgauge, with digital display Target / actual value stop value input stepless adjustment over the entire travel range- 1x hold-down bar- 1x material side stop- recessed grips in the front support table- Manual cutting gap adjustment from the front- Rear sheet holding device for thin sheets- 1x freely movable foot switch- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of Lo ...

sheet width: 6020 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmback stop - adjustable: max. 1000 mmwork height max.: 1030 mmno. of strokes: 5 - 10 Hub/mincutting angle: 0.5 - 3.0 °down holder: 33 StückControl: SC 100 T engine output: 11.0 kWweight of the machine ca.: ca. 27000 kgrange L-W-H: 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request- in checked conditions - machinevideo - https://www.youtube.com/watch?v=qH3uqGNZZp8Equipment:- Robust electro-hydraulic guillotine shear Design: Guide rail- HACO CNC control model SC 100 T, pivoting at the front left Control unit with LCD display Pre-selected positioning of the backgauge Digital display of actual position Electro-hydraulic cutting angle adjustment Electro-hydraulic cutting gap adjustment Programmable retraction from the backgauge Programmable cutting length limitation Automatic + manual pr ...

weight max.: 60 tworkpiece diameter: 200 - 5000 mmdrum diameter: 250 x 100 mmtotal power requirement: 2 x 3,0 kWweight of the machine ca.: 3,0 tDimensions (LxWxH): 3,5 x 2,0 x 0,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 370 mmplate thickness: 3 mmno. of straightening rolls: 12 roll diameter: 62 mmRoller diameter 60 mmWorkable strip thickness from 0.6 to 3.00 mmRoller configuration: 2+9+2 tempered and groundDouble input and output drive rollers pressed by 2+2 pneumatic cylindersInfeed and outfeed belt guide with 4 self-centering rollersHydraulic opening of the head for pilot release.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

maximum stroke: 350mm, extension: 450mm, between frame: 3240mm, equipped with Fiesslet AKAS Iii 150 S/HS protection; with 2 pallets of various chamfering tools. Auction-ID: A1-49889-12

Various items on 10 pallets Auction-ID: A1-49889-13

General Description Fully automated robotic press brake bending cell manufactured by AMADA, model ASTRO II 100 NT / HDS 1030. Designed for automated sheet-metal bending with robotic workpiece loading, positioning, manipulation and unloading. The system combines an AMADA HDS 1030 press brake with the ASTRO 100 NT robotic handling system. Technical Details Manufacturer: AMADA Model: ASTRO II 100 NT / HDS 1030 Machine type: Robotic press brake bending cell Year: 2007 Serial number: 20306066 Press capacity: 100 t / approx. 980 kN Bending length: Approx. 3,000–3,110 mm Distance between uprights: 2,700 mm Stroke: 200 mm Throat depth: 415 mm Control: AMADA AMNC PC / AMNC II generation Robot: Yaskawa Motoman YR-HP20-A63 / ASTRO 100 NT system Robot payload: 20 kg Robot manufacture: November 2007 Automatic workpiece loading and handling Automatic multi-stage bending Automatic workpiece manipulat ...

General Description CNC laser-punch combination machine manufactured by AMADA, model EML 3610 NT. Combines high-speed CNC turret punching with 4 kW CO₂ laser cutting in a single production system. Equipped with automatic sheet loading and unloading for efficient, largely unattended sheet-metal processing. Technical Details Manufacturer: AMADA Model: EML 3610 NT Machine type: CNC laser-punch combination machine Year: 2006 Serial number: 43610024 Laser: 4.0 kW CO₂ Punching force: 300 kN (30 t) Working area: Approx. 3,050 × 1,525 mm Z-turret with 45 tool stations 4 auto-index stations AMADA / FANUC CNC control Automatic sheet loading and unloading system MP300 material handling system Donaldson Torit DCE extraction / dust collection system Turbo blower replaced approx. 400 operating hours ago Vacuum pump replaced approx. 600 operating hours ago Dimensions Machine installation length: A ...

Various items; in 2x warehouse rack 900x900x1560mm Auction-ID: A1-49889-16

Extension: 420mm, distance between frame: 3760mm, equipped with Fiesslet AKAS Iii 150 S/HS protection Auction-ID: A1-49889-15

Discharge m 420mm, distance between frame: 2700mm, equipped with Fiesslet AKAS Iii 150 S/HS protection. Includes 1 tool drawer cabinet and various segment bending knives; Auction-ID: A1-49889-17

From the bankruptcy of a roofing company. With foot switch, on metal base, self-made. Auction-ID: A1-50529-273

sheet width: 2520 mmplate thickness: 2.0 mm STplate thickness: 3.0 mm ALUdistance between columns: 2600 mmcutting angle: 2.0 °no. of strokes: ca. 32 Hub/minweight: 1480 kgrange L-W-H: 2892 x 1865 x 1430 mm Machine from a sheet metal shop Good condition () Features:- Robust, electric-motor-driven panel shear- Shatterproof, torsion-resistant welded steel construction- Compact and well-organized machine design- Electric-motor-driven backgauge With analog position display Manual fine adjustment from the front - 1x holding-down bar (continuous)- 1x freely movable foot switch- Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From the bankruptcy of a roofing company. With foot switch, on metal base, self-made. Auction-ID: A1-50529-272

sheet width: 2040 mmplate thickness: 6,0 mmdistance between columns: 2100 mmroll diam. toproll: 180 mmroll diam. bottom roll: 160 mmtotal power requirement: KWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 3,5 x 0,85 x 1,75 mmSheet metal bending machine with 3 rollers- 2 driven rollers- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mmcutting length: 225 mmblade length: 225 x 225 mmtable surface area: 710 x 500 mmtotal power requirement: 3,5 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,2 x 0,8 x 1,1 m90° Notching machineLarge tableAdjustable stopsFootswitchEmergency stop switchScrap collection binThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.