sheet metal working used for sale (3,310)

Key data: 225 mm

Sheet thickness 6 mm Knife length 225 mm Machine weight approx. 1.2 t Space requirements approx. 1.1 x 1.4 x 1.5m Total power requirement 55 kW Notching machine with fixed angle 90°

Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Key data: 60 mm, 2 mm

Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-way adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 thorns - Mandrel retraction device - Foot pedal - Bending speed adjustment Country of origin: the Netherlands Motor power: 7.5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Key data: 3100 mm, 6 mm

Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Equipped with: - 3 sheet metal support arms - Rear access protection - Foot pedal Engine power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons

sheet width: 3000 mmplate thickness: 10 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 9,8 tdimensions of the machine ca.: 4,15 x 3,55 x 2 mBrand: DurmaType: DHGM 3010Year of make: 2002Knife length: 3.000 mmPlate thickness: 10 mmElectric backstopMachine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mmMachine weight: 9.800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 30 mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 2210015Type of machine Hydr. 3-roll bending machineMake HAUSLERType RMA 2500/30Build in 1962Type of control conventional Additional informationmax. widht 2500 mmMax. plate thickness 30 mm3 rollsdiameter upper oll 450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3554 mmplate thickness: 42 mmpre-bending: 36 mmControl: total power requirement: kWweight of the machine ca.: 49 tdimensions of the machine ca.: 7.3x2.4x2.5 mStocknumber 2210024Type of machine 4-roll CNC Plate bending machineMake FACCINType 4HEL 3554Build in 2000Type of control CNC Additional informationCap. 3554 x 42 mmprebending 36 mmToprolldiam. 540 mmunderrolldiam. 530 mmsiterolldiam. 430 mm55 KwLxWxH= 7350 x 2400 x 2500 mmweight of the machine 49 tonThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 20 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 2110009Type of machine ShearMake DARLEYType GS 3100/20Build in 1987Type of control Incl. electric guidesheet widht 3100 mmPlate thickness 20 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 53 mmpre-bending: 45 total power requirement: 60 kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 2210020Type of machine 4-Roll Plate Bending machineMake DAVIType MCB 3053Build in 1998Type of control Conventional Additional informationmax. Plate widht 3050 mmMax. plate thickness 53 mmMax. thickness prebending 45 mmToprol diameter 525 mmunder roll diam. 470 mmSite rolls diam. 400 mmPower 78 HpHardened rollsConical bendingDimensions: 6000 x 3100 x 6700 mmin very good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 41.9 x 2.7 R21 x 8 mm Featured with - Foot pedal - Operating Instructions (NL) Pneumatic machine

1 of used pneumatic, overhead mounted, moveable on rails, industrial manipulator / lifting device (balancer), make Dalmec, type Partner Equo PES, new 1993. Gripper-head with 4 length/width simultaneously adjustable suction cups (from 1.110 x 360 to 1.650 x 650 mm) with venturi vacuum generator for max. load 120 KG. Maximum turning radius 2.500 mm. Vertical stroke 1.250 mm. Tube length 5.000 mm. Last used for handling sheets of steel. Rails not included.

This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information.

STIGAL DYNAMIC plasma-gas cutting machine was built in 2014 in Poland by STIGAL Marcin Stępień. The machine is used for the precision cutting of sheet metal with a maximum thickness of 60 mm. The cutting process is performed automatically on a work table with dimensions of 3000 x 2000 mm. The CEBORA PLASMA PROF source generates a stable plasma arc, which ensures effective cutting of the material and maintains optimal operating parameters even during intensive use. A spark shield is installed next to the plasma torch to protect the eyes of the operator and anyone else in the vicinity of the operating machine. Thanks to this, the operator can carry out their work without the need to wear safety glasses during most of the cutting process. The shield is raised and lowered directly from the control panel. Fumes and dust generated during cutting are removed by an electronically control ...

This 3-axis ECKERT OPAL WATERJET was manufactured in 2019. It features a spacious work table measuring 3000 x 1500 mm and can cut materials up to a maximum thickness of 150 mm. With a travel speed of 25000 mm/min, this machine is designed for efficiency. If you are looking to get high-quality waterjet cutting capabilities, consider the ECKERT OPAL WATERJET machine we have for sale. Contact us for further details.

This Bystronic BySprint Fiber 6520 was manufactured in 2016. It features a 6 kW laser power, handling work table sizes up to 6500 mm x 2000 mm. It efficiently processes materials like carbon steel, copper, and brass. The CNC control system, BYSTRONIC ByVision, includes a touchscreen and remote control for cutting parameter adjustments. Consider the opportunity to buy this Bystronic BySprint Fiber 6520 fiber laser cutting machine. Contact us for more information about this machine.

This 3-axis ECKERT JANTAR 2 plasma cutting machine was manufactured in 2010. It features a working table dimension of 6,000 × 3,000 mm and a material thickness range of 3–100 mm, depending on the cutting process. The machine is equipped with a Hypertherm HPR130 plasma cutting system, ensuring efficient operation. If you are looking to get high-quality cutting capabilities, consider the ECKERT JANTAR 2 machine we have for sale. Contact us for further details.

CNC punching machine manufactured in 2001. This TRUMPF TRUMATIC 5000 R features a maximum punching force of 220 kN and a working area of 2,535 × 1,280 mm. It is equipped with a Siemens SINUMERIK 840D control system and a tool magazine with 18 positions. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 5000 R machine we have for sale. Contact us for further details.

WJS NC 3000 T waterjet cutting machine was built in 2002 in Sweden by Water Jet Sweden AB. The high-pressure pump working with the machine has been regularly serviced using only the manufacturer’s original parts. The WJS NC 3000 T is designed for the precision 2D cutting of workpieces made from metal and non-metallic materials, such as ceramics, glass and acrylic. Cutting is performed using pure water or water with an addition of abrasive. The machine is equipped with four cutting heads. The third and fourth heads are mounted on a common Z-axis, with a spacing of 80 mm. This solution allows simultaneous cutting with three heads, which increases cutting efficiency and reduces production time. The WaterJet NC 3000 T is operated using an intuitive NUM 1040 CNC controller. The equipment also includes, among others, an abrasive tank with a feeder and a 100 HP high-pressure pump. All t ...

CO2 laser cutting machine manufactured in 2008. This SEI Laser Paper Blaster 02 features a sealed CO₂ laser with a nominal power of 115 W, designed for paper and cardboard processing. It includes an automatic sheet feeder with a maximum stack height of 350 mm and an integrated conveyor system for efficient operation. If you are looking to get high-quality cutting, marking, and engraving capabilities, consider the SEI Laser Paper Blaster 02 machine we have for sale. Contact us for further details.

This 6-axis ERMAKSAN Speed-Bend Pro 1270x60 was manufactured in 2021. It features a bending force of 60 t and a bending length of 1270 mm. The CNC-controlled backgauge includes X-axis travel of 500 mm and R-axis travel of 250 mm, ensuring precise operations. If you are looking to get high-quality bending capabilities, consider the ERMAKSAN Speed-Bend Pro 1270x60 press brake we have for sale. Contact us for further details.

STIGAL VXstandard plasma-gas cutting machine was built in 2013 in Poland by STIGAL Marcin Stępień. The machine is used for the precise cutting of large-size sheet metal with a maximum length of 7 metres and a width of 2 metres. The use of both a gas and a plasma torch allows the cutting method to be adapted to current production requirements. The plasma arc is generated by a high-performance CEBORA PLASMA PROF 254 source, which minimises spatter during operation and reduces the need for additional machining of the finished parts. These features make the STIGAL VXstandard suitable for the production of precise steel components used across various industrial sectors. The machine features a stable, open design that provides free access to the work area from all sides. Outside the main work area is a attachment designed for tube machining. All process parameters are programmed using an  ...

BAIWEI BW-G3015 1,5 kW fiber laser was built in 2019 in China by ZHENGZHOU BAIWEI CNC MACHINERY SHARES CO., LTD. The machine, designed for the precise cutting of sheet metal with a maximum thickness of 14 mm is ideal for both unit and series production. Cutting is performed using a stable fiber beam generated by a RAYCUS 1,5 kW laser source. The fiber laser technology offers greater energy efficiency and higher performance compared to other cutting methods. The BAIWEI BW-G3015 is equipped with a RAYTOOLS cutting head with a range of useful features. The autofocus automatically adjusts the focal position to the thickness of the material being machined. An anti-collision system detects obstacles, reducing the risk of the head colliding with the workpiece. These solutions enable efficient cutting while maintaining a high level of machining accuracy. All process parameters are programm ...

SIMMECH SIMMFORM 2000 duct beader was built in 2009 in Poland by SIMMECH s.c. The machine is used is designed to shape reinforcing beads over entire sheet metal length. This type of machining increases the stiffness of the material and its resistance to deformation while maintaining a relatively low weight. The finished sheet metal can then be used for the production of profiled sheet metal components or subjected to further machining, including plasma cutting. The SIMMECH SIMMFORM 2000 is designed for machining sheet metal with a thickness ranging from 0,55 to 1,2 mm and a maximum width of 2050 mm. The beading process is performed by gradually forming the moving material using rollers. The maximum working speed is 11 m/min, and the drive is provided by a high-performance R57SKH90L4 geared motor with a power of 1,5 kW. The machine is operated manually, with the possibility of setting  ...

This AMADA AC2510 NT + MP 250 was manufactured in 2009. It features a 51-station turret and can handle sheet sizes up to 1270 × 5000 mm, with a maximum thickness of 3.2 mm for mild steel. The machine includes a loading system MP 250, enhancing its efficiency. Consider the opportunity to buy this AMADA AC2510 NT + MP 250 CNC punching machine. Contact us for more information.

This 3-axis AMADA LC2415 Alpha 5 was manufactured in 2017. It features a maximum processing area of 5,040 × 1,550 mm and a powerful 3,500 W CO₂ laser, capable of cutting mild steel and stainless steel up to 10 mm thick. The machine has a maximum simultaneous feed rate of 114 m/min and can handle workpieces weighing up to 330 kg. If you are looking to get high-quality cutting capabilities, consider the AMADA LC2415 Alpha 5 CO₂ laser cutting machine. Contact us for further details.

FALCON S4020 6 kW fiber laser was built in 2025 in China by FFG CHINA CO., LTD. The machine was launched in March 2026 and has been in operation for a small number of hours. It is covered by a valid warranty until February 2031. This fibre laser belongs to the FALCON S Masterline series, developed for users seeking high performance while keeping operating costs low. The machine is designed for the precise cutting of large sheets of metal with a maximum thickness of 30 mm. Cutting is performed using a fiber optic beam generated by a high-performance ULTRON 6 kW laser source. The narrow focal spot, combined with high energy density, ensures precise material machining with minimal thermal deformation. The fibre laser technology also offers greater energy efficiency and performance compared with other cutting methods. The FALCON S4020 features a BOCHU 3D cutting head with a range of us ...

CIDAN QLA-PROFI slitting and cut-to-length line is designed for the efficient machining of sheet metal fed from a coil. It enables the slitting of material with a maximum thickness of 3 mm into strips of a specified width, as well as cut-to-length into sheets with a maximum length of 1550 mm. The combination of both cutting methods in one process enables the efficient preparation of the material for subsequent machining stages while maintaining high dimensional accuracy and repeatability. The CIDAN QLA-PROFI 1550/1,5 coil slitting line consists of machines built between 2008 and 2011, which were combined into one complete system in 2023. It includes: – 5t sheet metal decoiler – CIDAN QLA-PROFI cutting unit with straightening and feeding rolls, circular knives for slitting and a guillotine for cut-to-length – SPX-20/130-2C hydraulic table – sheet metal recoiler – scrap r ...

MTP HSH-6x3200 hydraulic guillotine shears were built in 2016 in Poland by Metal Technics Polska s.c. The machine is designed for the precise cutting of sheet metal with a maximum length of 3200 mm and a thickness of 6 mm. The cutting process is performed by cutting knives with high wear resistance, which provide accurate, repeatable results even during intensive operation. The work table is fitted with built-in balls to facilitate the positioning of the material in the working area. The MTP HSH-6x3200 also features an ESTUN E21S CNC controller with an intuitive interface and many functions designed to facilitate machine operation. All this is complemented by a robust design which, combined with a 9 kW motor, ensures reliable operation of the machine in demanding industrial conditions. The HSH 6x3200 guillotine shears weigh 7200 kg. Technical specifications of the MTP HSH-6x3200 guill ...

This TRUMPF TruPunch 3000 CNC punching machine was manufactured in 2013. It features a working area of 2500 mm x 1250 mm and a maximum punching force of 180 kN. The machine is equipped with 18 tool stations and offers a maximum punching rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 3000 machine we have for sale. Contact us for further details.