sheet metal working used for sale (3,350)

AJAN SHP 130 plasma cutting machine was built in 2021 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd. Şti. The machine has been regularly serviced. In 2024, the SCT260 torch was replaced with a new one. The AJAN SHP 130 is designed for the precision cutting of sheet metal with a maximum thickness of 30 mm. Plasma cutting is performed using a reliable torch in accordance with a pre-programmed cutting programme. The plasma source ensures high energy efficiency and stable operating parameters, even during intensive use. The work table with a length of 3000 mm and a width of 2000 mm is equipped with an integrated fume extraction system, which effectively removes contaminants generated during cutting, improving operator comfort and safety. The plasma cutting machine is controlled by an advanced CNC controller with an intuitive interface. The machine operator also has at the dispo ...

Automatic Coil Cut-to-Length Line manufactured in 2025. This SACFORM CRL1503-6 is designed for processing aluminum, mild steel, and stainless steel with a material thickness capacity of 1-3 mm. It features a maximum coil weight of 6000 kg and a finished sheet length of 500-4000 mm. If you are looking to get high-quality cut-to-length capabilities, consider the SACFORM CRL1503-6 machine we have for sale. Contact us for further details regarding this machine.

Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details.

This 7-axis TRUMPF TruBend 7050 (B28) was manufactured in 2022. It features a press force of 500 kN and a bending length of 1,530 mm. The machine includes a dynamic electromechanical drive and a CNC-controlled crowning system for precise bending operations. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 7050 (B28) press brake we have for sale. Contact us for further details.

This 3-axis TRUMPF TruLaser 5030 fiber L76 FMC was manufactured in 2022. It features a working format of 3,000 x 1,500 mm and a powerful 6000W solid-state disk laser. The machine includes an automatic longitudinal pallet changer and advanced cutting capabilities, such as adaptive lens systems and automatic nozzle changers. If you are looking to get high-quality fiber laser cutting capabilities, consider the TRUMPF TruLaser 5030 fiber L76 FMC machine we have for sale. Contact us for further details.

This 3-axis TRUMPF TruMatic 6000-1600 fiber was manufactured in 2022. It features a maximum laser power of 3,000 W and a punching force of 180 kN, with a maximum punching frequency of 917 strokes/min. The machine has a large working area, allowing for combined punching and laser processing. If you are looking to get high-quality punching and laser cutting capabilities, consider the TRUMPF TruMatic 6000-1600 fiber machine we have for sale. Contact us for further details.

KIMLA POWERCUT LF 1530 6 kW fiber laser was built in 2018 in Poland by POLCOM Przemysław Kimla. The machine is designed for the precision cutting of sheet metal with maximum dimensions of 3050 x 1550 mm. The combination of proven technical solutions with reliable components makes the KIMLA POWERCUT LF 1530 an excellent solution for both unit and series production. The cutting process utilises a stable fibre-optic beam generated by a high-performance 6 kW IPG laser source. The PRECITEC cutting head, equipped with an advanced focusing lens system, ensures optimal laser beam geometry for various types of materials. This solution enables very smooth and even edges on the workpieces. To increase production efficiency and minimise downtime, the POWERCUT LF 1530 laser cutting machine is equipped with an automatic pallet exchange system. This system enables simultaneous loading and unload ...

ZENITH MACHINES HRBM 65 3-roll bending machine was built in 2020 in China. The machine is designed for the precision bending of steel tubes and profiles into arcs, circles and spirals with a constant radius. The bending process is performed using three driven rollers rotating at a maximum speed of 9,3 rpm. The hydraulic pressure enables precise positioning of the upper roller. Side positioning shafts stabilise the workpiece during operation, increasing process stability, bending precision and the range of operations that can be performed. Thanks to its robust design and reliable components, the ZENITH MACHINES HRBM 65 is an excellent addition to professional production plants and workshops. The total weight of the bending machine is 720 kg. It is possible to purchase 4 ROLOTOK roller conveyors, each 3 m long with a roller width of 600 mm, at an additional cost. The price of one convey ...

ECKERT AGAT SPEED 6000x2000 oxy-fuel cutting machine was built in 2019 in Poland by ECKERT AS Sp. z o.o. The machine is designed for the precision oxy-fuel cutting of sheet metal, enabling the production of high-precision and repeatable components. Machining is performed by a HARRIS oxy-fuel torch based on pre-programmed cutting programmes. A support with a capacitive distance sensor maintains the correct torch height above the workpiece, ensuring a stable process. The 6000 x 2000 mm work space enables the machining of larger workpieces, whilst the machine’s open design ensures convenient access to the work area from all sides. The ECKERT AGAT SPEED is operated via the intuitive ECS 872 CNC controller with a touchscreen. The machine is also equipped with CAD/CAM software, which streamlines project preparation and the management of the sheet metal cutting process. Technical specif ...

This 9-axis BLM DH4010 fully electric CNC wire bending machine was manufactured in 2022. It features a dual-head design with a maximum wire diameter capacity of up to 12 mm for wire with tensile strength of 600 MPa. The machine includes advanced programming software, realistic 3D simulation, and automatic wire feeding. If you are looking to get high-quality wire bending capabilities, consider the BLM DH4010 machine we have for sale. Contact us for further details.

Fully electric CNC tube bending machine manufactured in 2022. This BLM E-TURN 52B features a Siemens Simotion CNC control system and offers advanced bending capabilities, including fixed radius, variable radius, and multi-radius bending. It is designed for low energy consumption and includes programmable booster and tooling stacks for enhanced performance. If you are looking to get high-quality tube bending capabilities, consider the BLM E-TURN 52B machine we have for sale. Contact us for further details.

FLADDER 200/GYRO-1000 VAC deburring machine was built in 2018 in Denmark by Fladder Danmark A/S. The machine, designed for the precise removal of burrs, edge rounding and surface finishing of metal parts, is an excellent solution for both small and large production plants. The combination of proven solutions with reliable components ensures high machining repeatability over the entire service life. The finishing process is performed fully automatically by conical 6 spindles, arranged in pairs on a gear head. The spindles simultaneously rotate around their own axes and perform an orbital movement, enabling machining in all directions. This design guarantees a uniform surface finish regardless of how the workpiece is positioned on the conveyor belt. Each spindle is additionally equipped with the Lock-it system, which facilitates the fitting and balancing of the abrasive brushes. The  ...

Press brake manufactured in 2003. This Durma HAP 40200 features a press force of 200 tons and a bending length of 4050 mm. It operates at a stroke rate of 6 strokes per minute, with a stroke length of 185 mm. If you are looking to get high-quality bending capabilities, consider the Durma HAP 40200 machine we have for sale. Contact us for further details.

CNC shearing machine manufactured in 2019. This GILARDI ATHENA 3.10 features a working length of 3,100 mm and a cutting capacity of 10 mm at 42 kg/mm². It includes a CYBELEC CybTouch 6 CNC control, automatic blade gap adjustment, and a robust steel frame. If you are looking to get high-quality shearing capabilities, consider the GILARDI ATHENA 3.10 machine we have for sale. Contact us for further details.

This 3-axis BLM Adige LT9 Combo Fiber 3kW was manufactured in 2012. It features a maximum raw material length of 6,500 mm and can process round tubes with a diameter of up to 225 mm. The machine is equipped with a powerful 3 kW fiber laser, ideal for cutting tubes, profiles, and sheet metal. If you are looking to get high-quality cutting capabilities, consider the BLM Adige LT9 Combo Fiber 3kW machine we have for sale. Contact us for further details.

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is designed for the comprehensive machining of sheet metal with a maximum thickness of 8 mm. It enables both punching and laser cutting in a single work cycle, reducing the need for additional operations on other machines. The combination of both these technologies in a single system speeds up task completion times and increases the efficiency of the production process. The punching process is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch movement to be pr ...

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is a high-performance sheet metal machining center that combines punching and laser cutting technologies. It enables comprehensive machining of workpieces with a maximum thickness of 8 mm, eliminating the need for additional operations on other machines. The use of both these technologies in a single system reduces task completion times and increases overall production efficiency. Punching is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch’s movement to be ...

This 8-axis AMADA HFBO 100-30 press brake was manufactured in 1998. It features a maximum press force of 1000 kN and a bending length of 3100 mm, providing robust capabilities for various applications. The machine has undergone software upgrades and cylinder replacements in 2024. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 100-30 press brake we have for sale. Contact us for further details.

DURMA VS 3013 hydraulic guillotine shears were built in 2021 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine is designed for precision cutting of sheet metal with a maximum length of 3100 mm and a thickness of 13 mm. The machining is performed by means of high quality cutting knives, which are characterised by high wear resistance and ensure accurate and repeatable cutting even during intensive operation. Automatic adjustment of the knife angle and the gap between the blades enables precise adjustment of the cutting parameters to the type and thickness of the material. The VS 3013 guillotine shears have a work table with integrated balls to facilitate material positioning. Along the cutting line there are hydraulic hold-downs which stabilise the workpiece during machining and prevent it from moving. The operator has at his disposal an advanced control system with  ...

This 3-axis ADIRA QHD-2512 PLC press brake was manufactured in 2009. It features a Cybelec DNC 60 control unit, a pressing force of 245 kN, and a bending length of 1330 mm. The distance between columns is 1250 mm, and it operates at a working speed of 8 mm/s. If you are looking to get high-quality bending capabilities, consider the ADIRA QHD-2512 PLC machine we have for sale. Contact us for more information about this machine.

This 3-axis punch press for profiles PARS HMP SIRIUS PLUS -3000/3-L1 was manufactured in 2015. It features a maximum section dimension of 110 x 110 mm and can handle wall thicknesses up to 8 mm. The machine offers a punching speed of 1 hole/s and is capable of punching 2 sections simultaneously with its 2-row design. If you are looking to get high-quality punching capabilities, consider the PARS HMP SIRIUS PLUS -3000/3-L1 punch press for profiles we have for sale. Contact us for further details.

DURMA VS 3006 hydraulic guillotine shears were built in 2021 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine is designed for precision cutting of sheet metal with a maximum length of 3100 mm and a thickness of 6 mm. The machining is performed by means of high quality cutting knives, distinguished by their high wear resistance. Automatic adjustment of the knife angle and the gap between the blades enables adjustment of the cutting parameters to the type and thickness of the material. Positioning of the sheet metal is facilitated by a work table with integrated balls, on which it goes directly under the cutting line. Along the cutting line, there are hydraulic hold-downs, which stabilise the material during machining and prevent it from moving. The DURMA VS 3006 is operated from an advanced control system with an intuitive interface and access to many necessary func ...

NUKON EXTREME LASER 25180 12kW fiber laser was built in 2021 in Turkey by NUKON Laser Cutting Machines Co. The machine is designed for precision cutting of large-format sheet metal with maximum dimensions of 12000 x 2500 mm. Thanks to the use of many state-of-the-art technical solutions, it is perfect for both unit and series production, guaranteeing high quality and repeatability of the manufactured parts. The NUKON EXTREME LASER 25180 performs 5-axis laser cutting with the NLCH cutting head, designed for demanding industrial environments. A number of unique features are incorporated inside the aluminium body to ensure the head meets and surpasses current industry standards. The focusing system used, together with the high-end optical system, enables accurate cutting of even very thin workpieces while maintaining high edge quality. In addition, the high energy efficiency optimises en ...

TRUMPF TruMatic TC 6000 L-1300 punch laser machine was built in 2010 in Germany by TRUMPF Werkzeugmaschinen GmbH+Co. KG. The machine combines punching, laser cutting, threading and forming, enabling comprehensive sheet metal machining in a single work cycle. The use of all these technologies in a single system eliminates the need for additional machining on other machines, reducing machining times and increasing productivity. The TRUMPF TruMatic TC 6000 L-1300 is distinguished by its welded C-shaped design, which guarantees high stability under heavy loads. Its large work table has built-in balls designed for easy positioning of the material during machining. All operations are performed by means of a universal work head, combined with a 2 kW laser. It enables punching holes with a maximum diameter of 76.2 mm, cutting workpieces with a maximum thickness of 8 mm and threading in the M2 ...

Automatic bending center designed for precise and maintenance-free bending of panels and sheet metal. Bending length: up to 1800 mm Material thickness: typically from 0.4 to 3.2 mm ABT system: The ABT (Auxiliary Bending Tool) option allows for up and down bending without the operator having to turn the sheet. SN: 2100889

This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details.

This 4-axis Baykal APHS 125040 press brake was manufactured in 2021. It features a bending length of 1250 mm and a pressing force of 40 tons, ensuring robust performance. The machine has a throat depth of 410 mm and a stroke of ram measuring 215 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 125040 press brake we have for sale. Contact us for further details.

This full electric SAFAN E-Brake B 50-2050 was manufactured in 2017. It features a maximum pressing force of 500 kN and a bending length of 2050 mm. The machine includes a programmable backgauge with a maximum stroke of 550 mm and a robust weight of 4750 kg. If you are looking to get high-quality bending capabilities, consider the SAFAN E-Brake B 50-2050 press brake we have for sale. Contact us for further details.

This 7-axis Baykal APHS 21060 press brake was manufactured in 2021. It features a pressing force of 60 tons and a bending length of 2100 mm, providing robust performance for various applications. The machine includes a throat depth of 410 mm and a stroke of ram measuring 210 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 21060 press brake we have for sale. Contact us for further details.

This full electric drive SAFAN E-Brake Premium 80-2550 was manufactured in 2019. It features a pressing force of 80 tons and a bending length of 2550 mm, ensuring robust performance for various applications. The machine is equipped with a maximum stroke of 300 mm and a backgauge with 4 fingers for enhanced precision. If you are looking to get high-quality bending capabilities, consider the SAFAN E-Brake Premium 80-2550 press brake we have for sale. Contact us for further details.