sheet metal working used for sale (3,233)

- Diameter 130 mm- Weight 18,4 Kg- Steel 400 N/mm2 = 6,0 mm- Inox   600 N/mm2 = 4,0 mm- Alu 250 N/mm2 = 7,0 mm

- Diameter 130 mm- Weight 18,5 Kg- Steel 400 N/mm2 = 6,0 mm- Inox   600 N/mm2 = 4,0 mm- Alu 250 N/mm2 = 7,0 mm

- Reforming Tool type WT/NFW- Diameter 150 mm- Weight 16.9 Kg- Steel 400 N/mm2 = 6,0 mm- Inox 600 N/mm2 = 6,0 mm- Aluminium 250 N/mm2 = 6,0 mm- For finish forming and calibrating of preformed components.- It consists of a tool carrier WT 80 S and forming inserts N NFW 102 - The forming inserts NFW in steel quality are designed forone single radius and one single thickness of material only.- Different forming inserts can be put into the sametool carrier WT 80 S.- But with one set of forming inserts only one single radius in one single thickness of material can be reformed.Inserts are available different shapes

- Milling cutter lazer Guided- Working range 2000 - 8000 mm- Designed for Mobile use on gauge 3000 mm

- New hydraulics 2015- Bed length 3540 mm- Stroke in X 1200 mm- Stroke in Z   300 mm- Speeds 18 steps from 6 to 675 Rpm

- Clamping area 215 - 620 mm- Rotation area 170 - 620 mm- Stroke 290 mm- Max. wall thicknes 1 cycle 40 mm- Rotation speed 25, 38, 50 Min- TRB Roller conveyor 7000 mm with V Type- Construction in height adjustable

- Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display - Hydraulicbendingdriveoperatedbyhandlevervalve- Hydraulic bending drive, operated by hand lever valve- Follower-type pressure die (sliding guide)- Hydraulic mandrel retraction- Pipe circular saw with coolant lubrication and automatic feed- Pipe deburring unit for internal and external deburring- Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device - Machine mobile and flexible to use

- Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display - Hydraulicbendingdriveoperatedbyhandlevervalve- Hydraulic bending drive, operated by hand lever valve- Follower-type pressure die (sliding guide)- Hydraulic mandrel retraction- Pipe circular saw with coolant lubrication and automatic feed- 6 Mandrels up to 24 mm included x 3000 mm- Pipe deburring unit for internal and external deburring- Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device - Machine mobile and flexible to use

- 3 rolls driven Servo- Torq each roller 3500 nM- Electrically support rolls - Intelligent software :- Ellipse program- U Bend shapes- control of tangents- Auto section detector

- incl. Boldrini MSF 45 Manipulator- Automatic positioning moulds in press- Roller are hydraulic driven- Roller arm adjustable in height  - Piston diameter ...- Fully hydraulic press with stroke..-  

STOPA understands what storage means. For this reason, the perfect UNPACKING TABLE has been developed to speed up the process of unpacking and depalletizing sheet metal packages. Increase your productivity by more easily separating sheet metal stacks from their carrier pallets. The unpacking table features a movable stamp frame on which the sheet metal package is placed at an ergonomic height. The packaging can now be easily removed, and the wooden pallets fall downwards. With the help of a forklift or crane, the sheet metal package can then be directly transported to the INCOMING GOODS STATION. Experience how easy unpacking can be. Ideal for any sheet format!  BENEFITS AT A GLANCE ˺ Facilitates the entire unpacking process. ˺ Easy separation of sheet metal packages and wooden pallets. ˺ Sturdy table with movable s ...

Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, StraighteningMachine equipped for tooling:FWR1307FWA 1306FWA 802TFWA 1002TLFA 120SLFA155T

- Thick turret WILSON tool system- Large package tooling WILSON- Auto indexing Rotation tools included- Laser Safety guids included 

- Range off edge radius Manual 20 - 500- Range off edge radius Automatic 150 - 500- Hydraulic Controllable forming roll drive- Hydraulic displacement drive- Clamping device without hole- Max. pressure manipulator 2000 Psi / 140 bar- Max. pressure press 5700 Psi / 400 bar- Max. speed forming roll 170 M/Min- Basket bottem- Knocker bottom- Pressure vessel bottom- Boiler bottoms- Flat floor- Plate base- diffuser bottom- Tank bottom- Tank bottom- Radar reflectors- Engine parts- Dispense air- Silo hoppers- Cooker hoods- Container parts- Hemispheres

- Extended end for profile bending rolls (Pipe & T-Angel)- Central lubrication- Digital readout position side rolls- Fully hydraulic machine- Hydraulic drop end- Hardned rolls

- Speeds 150 strokes- Hand ram adjustment 0 - 60 mm- Large tooling package ca 12 units - Wheeling tooling set (englisch wheel)- Vertical troath 250 mm- Horizontal Troath 400 mm

- Digiral read out position side rolls- Set universal rolls included- Hydraulic opperated

- Force lower rol upper roll 1178 Ton- Cone bending attachment- Hardned and grounded rolls- Width between upper and lower roll 200 mm- Power 180 kW

Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, StraighteningMachine equipped for tooling:FWR1307FWA 1306FWA 802TFWA 1002TLFA 120SLFA155T

- incl. AMF BUR-10 switch box - incl. AMF remote control - New over EUR 6000 

Key data: 300 t, 4300 mm, 3700 mm

Printing capacity: 300 ton Bending length: 4,300 mm Stand width: 3,700 mm Back gauge: 550 mm Stroke length: 300 mm Projection: 450 mm Feed speed: 120 mm/sec. Working speed: 10 mm/sec. Retraction speed: 120 mm/sec. Control: Delem DA65 Equipped with: - Y1, Y2, X&R - Axis Controlled - CNC hydraulic crowning - Various sets of bending tools - Safety light cabinet Lazer Safe - Operating instructions and machine documents Country of origin: Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21,500 kg

Key data: 110 t, 3100 mm, 2550 mm

Printing capacity: 110 ton Bending length: 3,100 mm Stand width: 2,550 mm Back gauge: 1,500 mm Stroke length: 150 mm Projection: 250 mm Feed speed: 100 mm/sec. Working speed: 8 mm/sec. Retraction speed: 65 mm/sec. Control: ESA Kvara S630 Touch Equipped with: - Foot pedal - Various tool sets - Light curtain safety Merlino - Controls renewed in 2018 Country of origin: Netherlands Motor power: 7.5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8,700 kg

Key data: 4100 mm, 13 mm, 4100 mm

Working length: 4,100 mm Cutting capacity: 13 mm Back gauge: 1,000 mm Director: Darley Delem Equipped with: - Trailer arms 4000 mm long - Foot pedal - Material discharge roller conveyor - Extra set of knives -Documentation Country of origin: Netherlands Motor power: 30 kW Machine LxWxH: 440 x 235 x 225 cm Machine weight: 18,400 kg