sheet metal working used for sale (3,291)

- 2 x AMF PowerTube 46 with 60 Bar to ope/clamp - 4 x AMF K20 model with diameter 110 mm - 2 x AMF package hose / tube / cables - Zero point clamping system improving set up time optimized clamping during cutting and non cutting machining. - Pull-in locking force 17 kN - Holding force            55 kN

- incl. AMF BUR-10 switch box - incl. AMF remote control - New over EUR 6000 

This compact machine with high efficiency is an ideal solution for serial production of stainless steel chimneys.Widen machine Stretcher allows to produce a large range of products: chimney pipes, drainpipes,ventilation pipes, etc. Expanding tools made of hard plastic to prevent future corrosion.

Key data: 300 t, 4300 mm, 3700 mm

Printing capacity: 300 ton Bending length: 4,300 mm Stand width: 3,700 mm Back gauge: 550 mm Stroke length: 300 mm Projection: 450 mm Feed speed: 120 mm/sec. Working speed: 10 mm/sec. Retraction speed: 120 mm/sec. Control: Delem DA65 Equipped with: - Y1, Y2, X&R - Axis Controlled - CNC hydraulic crowning - Various sets of bending tools - Safety light cabinet Lazer Safe - Operating instructions and machine documents Country of origin: Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21,500 kg

Key data: 110 t, 3100 mm, 2550 mm

Printing capacity: 110 ton Bending length: 3,100 mm Stand width: 2,550 mm Back gauge: 1,500 mm Stroke length: 150 mm Projection: 250 mm Feed speed: 100 mm/sec. Working speed: 8 mm/sec. Retraction speed: 65 mm/sec. Control: ESA Kvara S630 Touch Equipped with: - Foot pedal - Various tool sets - Light curtain safety Merlino - Controls renewed in 2018 Country of origin: Netherlands Motor power: 7.5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8,700 kg

Key data: 4100 mm, 13 mm, 4100 mm

Working length: 4,100 mm Cutting capacity: 13 mm Back gauge: 1,000 mm Director: Darley Delem Equipped with: - Trailer arms 4000 mm long - Foot pedal - Material discharge roller conveyor - Extra set of knives -Documentation Country of origin: Netherlands Motor power: 30 kW Machine LxWxH: 440 x 235 x 225 cm Machine weight: 18,400 kg

Iron Turning and Twisting Machine Bielsa Turning length: 1200 mm Center height: 135 mm Suitable for: - Eisenverdehen - Wrought iron curls - Bending chopping Equipped with: - Various bending workpieces - Various auxiliary pieces -Operating instructions Country of origin: Spain Engine power: 2 hp Machine LxWxH: 186 x 55 x 126 cm Machine weight: 400 kg

Key data: 45 mm, 130 mm, 13 mm

Punching force: 70 ton Punching capacity: Ø 28 in 20 mm steel Projection: 300 mm Scissors: 130 x 130 x 13 mm angle steel 90º 450 x 15 mm flat steel 45 mm round steel Notching: 100 x 13 mm Equipped with: - Electric length stop 1000 mm - Various accessories - 2 stations machine Country of origin: Spain Motor power: 7.5 kW Machine LxWxH: 2000 x 1200 x 2000 mm Machine weight: 2000 kg

Mechanical Sheet Metal Shears HSK/W Small mechanical slag shears Capacity 1030×2.5mm With electric rear and forward stop With extra knife Can be viewed under power

Key data: 225 mm

Sheet thickness 6 mm Knife length 225 mm Machine weight approx. 1.2 t Space requirements approx. 1.1 x 1.4 x 1.5m Total power requirement 55 kW Notching machine with fixed angle 90°

Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Key data: 60 mm, 2 mm

Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-way adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 thorns - Mandrel retraction device - Foot pedal - Bending speed adjustment Country of origin: the Netherlands Motor power: 7.5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Key data: 3100 mm, 6 mm

Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Equipped with: - 3 sheet metal support arms - Rear access protection - Foot pedal Engine power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Brand BENDMAK Type CYL-ST-170-20-5,0 Working lenght 2100 mm Pre-Bending 5 mm Max Thickness 5 mm Top Roll 170 mm Min Bending 255 mm Motor Power 4 kW Bending Speed 4,8 m/min. Dimensions L x W x H 4000 x 1100 x 1130 mm Weight 2300 kg Year 2015 Extra information Cone Bending device Induction hardened rolls Motorized Up and Down movement of the Back Roll Digital readout for Displaying positions of the Back Roll 2 Separte Control Units Cast Iron Body

Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons

sheet width: 3000 mmplate thickness: 10 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 9,8 tdimensions of the machine ca.: 4,15 x 3,55 x 2 mBrand: DurmaType: DHGM 3010Year of make: 2002Knife length: 3.000 mmPlate thickness: 10 mmElectric backstopMachine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mmMachine weight: 9.800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 30 mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 2210015Type of machine Hydr. 3-roll bending machineMake HAUSLERType RMA 2500/30Build in 1962Type of control conventional Additional informationmax. widht 2500 mmMax. plate thickness 30 mm3 rollsdiameter upper oll 450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3554 mmplate thickness: 42 mmpre-bending: 36 mmControl: total power requirement: kWweight of the machine ca.: 49 tdimensions of the machine ca.: 7.3x2.4x2.5 mStocknumber 2210024Type of machine 4-roll CNC Plate bending machineMake FACCINType 4HEL 3554Build in 2000Type of control CNC Additional informationCap. 3554 x 42 mmprebending 36 mmToprolldiam. 540 mmunderrolldiam. 530 mmsiterolldiam. 430 mm55 KwLxWxH= 7350 x 2400 x 2500 mmweight of the machine 49 tonThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 20 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 2110009Type of machine ShearMake DARLEYType GS 3100/20Build in 1987Type of control Incl. electric guidesheet widht 3100 mmPlate thickness 20 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 53 mmpre-bending: 45 total power requirement: 60 kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 2210020Type of machine 4-Roll Plate Bending machineMake DAVIType MCB 3053Build in 1998Type of control Conventional Additional informationmax. Plate widht 3050 mmMax. plate thickness 53 mmMax. thickness prebending 45 mmToprol diameter 525 mmunder roll diam. 470 mmSite rolls diam. 400 mmPower 78 HpHardened rollsConical bendingDimensions: 6000 x 3100 x 6700 mmin very good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 41.9 x 2.7 R21 x 8 mm Featured with - Foot pedal - Operating Instructions (NL) Pneumatic machine

1 of used pneumatic, overhead mounted, moveable on rails, industrial manipulator / lifting device (balancer), make Dalmec, type Partner Equo PES, new 1993. Gripper-head with 4 length/width simultaneously adjustable suction cups (from 1.110 x 360 to 1.650 x 650 mm) with venturi vacuum generator for max. load 120 KG. Maximum turning radius 2.500 mm. Vertical stroke 1.250 mm. Tube length 5.000 mm. Last used for handling sheets of steel. Rails not included.

This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information.

MVD B06-3100 hydraulic guillotine shears were built in 2014 in Turkey by MVD Inan Machine Tool Industry Co. The machine is used for precision cutting of sheet metal with a maximum thickness of 6 mm. The machining process is performed by means of high-quality cutting knives, set at an angle of 1.5°. Positioning of the material is facilitated by a work table with integrated balls, on which the workpiece goes directly under the cutting line. All this is complemented by a robust design with a reliable 10 kW main motor. The MVD B 06-3100 guillotine shears weigh approximately 6000 kg. Technical specifications of the MVD B06-3100 guillotine shears - maximum sheet metal length: 3100 mm - maximum sheet metal thickness: 6 mm - number of strokes (automatic mode): 30/min - number of strokes (manual mode): 18/min - cutting angle: 1,5° - minimum distance of light curtain from knife: 2030 mm ...

FINN-POWER X5 turret punch press was built in 2006 in Finland by Finn-Power OY (now PRIMA INDUSTRIE S.p.A.). The machine is used for precision machining of sheet metal with a maximum thickness of 8 mm. The machining process is performed fully automatically by means of a reliable workhead, operating with a maximum force of 25 tonnes. Together with the head, a 20-station turret cooperates which enables a large number of tools of all sizes and types to be stored. The material feed, in turn, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. All this is complemented by equipment, consisting of, among others, light curtains and tools. Thanks to all of this, the offered FINN POWER X5 CNC punching machine is the best choice for companies that place emphasis on the high quality of manufactured parts. The to ...

EUROMAC STX Flex 12 1250/30-2500 punching machine was built in 2019 in Italy by Euromac S.p.A.. The machine is designed for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching, nibbling and marking, are performed with a force of up to 30 tonnes on a large brush table. Its design prevents scratches and scrapes on the sheet metal surface and significantly reduces noise levels. All tools are stored in capacious stations, three of which are 360° index stations. The high number of tool strokes per minute, reaching up to 2000/min, allows, in turn, maximum production efficiency during even the most intensive challenges. All this is complemented by an advanced industrial controller that allows even the most advanced programmes to be created in just a few steps. The EUROMAC STX Flex 12 Hybrid 1250/30-2500 CNC punching machine weighs 9500 kg. Technica ...