other machines for plastic used for sale (519)

Plant complete with all the machinery and molds to produce plastic pots, saucers, cages and thermoformed pot holders of various types and sizes: from 40 cm. up to 1 m. Composed of: N1) 135 ton SANDRETTO plastic injection press N1) 135 ton SANDRETTO plastic injection press N1) 200 ton SANDRETTO plastic injection press N1) 300 ton SANDRETTO plastic injection press N1) 400 ton SANDRETTO plastic injection press N1) 5 pallets CAMPETELLA robot + labeller N1) 7 pallets CAMPETELLA robot + labeller N3) automatic stacking and coding lines N2) mold cabinets with drawers with a capacity of 1000 kg N1) refrigerator to cool water N1) freecooler to cool the oil N59) molds for flower pots

PRE-ALPINE REGENERATION LINE COMPLETELY REVISED, ELECTRICAL WIRING, VENTILATORS, PULPIT. EQUAL TO THE NEW! MATERIAL: PE PP PC PS ABS HOPPER WITH DOSING UNIT EXTRUDER WITH DIAM SCREW. 105 MM. 35 L/D AVERAGE PRODUCTION 300/450 KG/H BASED ON MATERIALS ENGINE: 117 KW OIL PUMP VACUUM DEGASSING PUMP centrifuge Cabinet

BRAND: TERRACUBED YEAR: 2022 MODEL: T1000 PRODUCTION HOURS: 250 APPLICATION TYPE: 3D PRINTING LOCATION: LITHUANIA MACHINE TYPE: 3D PRINTER AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: DUET3 Technical Information CONTROL UNIT BRAND: DUET3 MODEL: MB6HC Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - BUILD VOLUME: 1X1X1M - PRINT SPEED: UP TO 1M/S - EXTRUDER FLOW: UP TO 3KG/H - LAYER HEIGHT: 0. 5-2MM - NOZZLE: 1MM, 3MM, 5MM (CURRENTLY EQUIPED WITH 3MM ) - CALIBRATION: 3 POINT TRUE BED LEVELING + 100 POINT MESH BED LEVELING - MOTION: TECNIC SERVO MOTORS AND CONTROLLERS EQUIPPED WITH WEB CAMERA FOR REMOTE INSPECTION CONTROLLER WIRELESSLY - ACCURACY: 0,05MM - ANDROID TABLET IS INCLUDED WITH THE PRINTER QUALITATIVE MACHINE BENEFITS: - MAINBOARD IS DUET3 BOARD. IT'S DETAILS ARE AS FOLLOWS: REPRAPFIRMWARE FOR DUET 3 MB6HC FIRMWARE_VERSION: ...

SCREW : 100MM MOTOR : 45 KW REDUCER : ZLY250 SPEED : 250 250KGS/HOUR REMARKS : 1)WOODEN CASE PACKAGE 2)NOT INCLUDE INSTALLATION COST 3)SINGLE SCREW EXTRUDER (1 PCS) 4)MOULD (1 PCS) 5)COOLING FLUME (1 PCS) 6)DRY MACHINE (1 UNI) 7)ELECTRICAL CHANGE NET SYSTEM (1 UNI) 8)PELLETIZER (1 UNI) 9) high temperature wire (FOC 30 m) Pelletizing Auto Pusher + Conveyor #1

CPE Gloves Stamping Machine exclude stamping mould, include silicon belt, stamping film holders (one set 2 pcs) and stainless steel surface for each machine

This TTN 400 250 was manufactured in 2012. It features an XY table for product positioning and an electronic shuttle for 6-color printing. The machine includes a 4-color inkwell and multiple cups for versatile printing options. Ideal for those looking to enhance their printing capabilities. Contact us for more information.

Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Working hours: 1.378 Screw dimension: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4.500 x 1.200 x 2.200 mm Weight: 1.350 kG Line configuration: – 1x Gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering device – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Brand: Collin Pilot & Lab Solutions Model: P300 Presse Year of construction: 1987 Plate dimensions: 296 x 296 mm Machine nr.: 6300 22 86 Connected load: 18 kW Dimensions (LxWxH): 1.150 x 530 x 1.750 mm Weight: 650 kG

Brand: SICA Type of Machine: Planetary saw Model: TRC/S/SY/U 63-400 Year of manufacturing: 2000

Deze inspectie systeem van Zumbach Electronics AG bij Plastima Used Machinery in de machineopslag. De machine komt uit 2015 en verkeerd in goede staat. – Merk Zumbach Electronics AG – Type Simac 63 – Bouwjaar: 2015 Chj Ujtpnfbjd Dvycod – Aantal camera's 3 – Buisdiameter min. 2 mm – Buisdiameter max. 50 mm

Sica Starbell Ce Ud Dswmrgvovycshd

10 Meter vacuum tank Leba 225 doorsnede Bs Ud Dswmrhajvycsww

Deze trekwerk zaag van ons gerenommeerde merk SICA S.p.a. staat bij Plastima Used Machinery in de machine opslag. De zaag komt uit 2003 en verkeert in gebruikte, maar goede staat. Brand: SICA S.p.A. Bwo Ud Dvstphp Ioycew Model: TRS/U 110-800 Year of construction: 2003 Power: 5.5 kW Pipe outer diameter max: 110 up to 800 mm

Voltage 380 V Power 3 kW Pipe Ø min. 63 mm Pipe Ø max. 400 mm Dimensions (LxWxH) 4400 x 1600 x 2600 Mm Weight 1580 kG Including universal clamps Be Udevlxt Ue Dvycjww

Brand: Rollepaal Pipe Extrusion Technology B.V. Model: RSV 8/1 Year of construction: 2005 Pipe outer diameter max: 8 mm Cooling length: 1000 mm Spray pump: 2.2 kW

This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm

This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Make: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm

This cooling tank from Primac is in machine storage at Plastima Used Machinery. The Cooling Tank is from 1994 and is in great condition. - Brand: Primac - Model: CV.2C. 125/6 - Pipe diameter max: 125 mm - Cooling length: 6000 mm - Year of construction: 1994

This Haul-Off machine from IPM is in the machine storage at Plastima Used Machinery. The pull bench is from 2005 and is in good condition. – Brand: IPM – Model: Haul-Off TR 400/6 – Year built: 2005 – Voltage: 400 V – Power: 10.94 kW – Pipe diameter max: 63 – 400 Ø (mm) – Additional info: Reinforced model for heavy pipes

This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm

Year: 2011 - technically efficient, ready to work – after full service - WT 535B automatic rotary station - disc cutter: 250 mm - windows PC control - profile recognition system - for turning tools on and off as needed - extensive tool equipment

Year: 2006 - technically efficient, ready to work – after full service - handle function - copying template - pneumatic profile mounting - centering device

Year: 2000 - technically efficient, ready to work – after full service - motor: 1.1 kW - pneumatic profile clamping - copying template - pneumatic guide finger - compressed air preparation station

MEGAPLOT OF1515 Roof Master EPS cutting machine was built in 2019 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine represents the MEGAPLOT Open Frame series, which has been specially designed for the efficient production of any type of slope roof plates made of polystyrene. The machining process is performed by means of hot wires mounted on two independently moving arms. Intuitive operation of the machine is ensured by the proprietary MegaRoofer software, which allows for simple preparation of machining projects. All you need to do is enter a few necessary parameters and the programme will automatically generate a ready-to-cut project. The MEGAPLOT OF1515 hot wire cutting machine is offered with a wide range of equipment, including a barcode scanner and rotary table. Technical specifications of the MEGAPLOT OF1515 Roof Master polystyrene cutting machine - work area (L x W x ...

MEGAPLOT XTR PRO 1200 CNC foam cutting machine was built in 2020 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine enables precise cutting of any shape in a wide range of rigid foams, soft foams and rockwool. Cutting is performed fully automatically by means of an endless wire, which accelerates to a speed of 280 km/h. Project files, including shapes and their layout, can be prepared in any graphics program (CorelDraw, AutoCAD etc.). This is because the advanced FastWire software supports all major file formats. The MEGAPLOT XTR PRO upholstery foam cutting machine is also equipped with a controller which enables simulation of the cutting process and setting of the machining parameters with their change during the cutting. All this makes the offered machine an excellent choice for businesses producing, among others, insulation elements, packaging and upholstered furniture. Tec ...

- technically efficient, ready to work – after full service - drilling for the bottom hinge - automatic screwdriver + ASS 60 screw feeder - punch holder - centring system - steering stop for trimming the stay - tilting table - shelf

Year: 2003 technically efficient, ready to work – after full service flash limit: 0.2 – 2 mm maximum welding dimension: 2400 mm support path programmable PLC controller automatic welding process

NAN-JHIEH NJ-900QE polystyrene pre-expander was built in 2008 in Taiwan by NAN-JHIEH ENTERPRISES CO. LTD. The machine is used in the pre-foaming of polystyrene, which is the first stage in the production of styrofoam boards. The raw material in the form of granules is subjected to high-temperature steam, which causes it to increase in volume several times. The result is expanded polystyrene EPS in a spherical form with a number of valuable properties, such as insulation, durability and flexibility of use. The NJ-900QE EPS pre-expander weighs 2800 kg. The machine on offer is part of a larger EPS production line. It is also possible to purchase the entire technological line, consisting of the following components: – NAN-JHIEH polystyrene pre-expander – EPS granulate feeding system – styrofoam forming machine (5 units) – injection moulding machine – robot for injection mou ...

NAN-JHIEH NJ-150VM EPS/EPE styrofoam moulding machine was built in 2008 in Taiwan by NAN-JHIEH ENTERPRISES CO. LTD. The machine is designed for the efficient production of various types of polystyrene parts, such as coffers, stucco, packaging inserts and food containers (lunchbox, thermobox, menubox etc.). The polystyrene is processed by means of special moulds that give the component the desired shape. These moulds are interchangeable so the machine can be adapted to different production profiles. A press force of up to 35 tonnes, combined with an extremely rigid design, ensure the achievement of high repeatability and quality of the components produced. The NAN-JHIEH NJ-150VM polystyrene moulding machine is currently configured for the production of expanded polystyrene (EPS) building blocks. Polystyrene building blocks are used in the building industry as lost formwork. Once a wall ...

technically efficient, ready to work - after full service bar spacing: 100 mm dimensions: 265 x 265 cm height: 150 cm weight: 350 kg