42 BUZULUK used machine for sale

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

1 x Buzuluk 240 litre Internal mixer Model: 14630, year: Dec 2008 (body and hopper), Batch size: 200 kgs, Drilled sides, Self sealing type dust seals, Oil injection, Hydraulic drop door with linear actuator and toggle latch, Stellite faced drop door, Two wing tangential rotors. 20in pneumatic hopper. 3 zone TCU Full unidrive gearbox (Make Skoda), with 630kW, 6000V, 739rpm, 73.5A slip ring motor and Oil filled starter. In very good condition.

Key data: 300 mm, 600 mm

Diameter: 300 mm Length: 600 mm Surface: smooth NIP setting: manual Motor: 30 kW Siemens Dimensions: approx. 1700 x 1560 x 1635 mm Weight: approx. 3000 kg CE marked from 2018 (engine with reverse gear, knee emergency stop)

The main machines in the line: fluid mixer Trusioma hot and cold KO-kneader BUSS Mixing mill Buzuluk 660x2100 mm 4-roll calender Buzuluk 700x1800 mm, inverted "L" tempering and stretching device behind the calender – roller track film thickness profile measuring device winding device

Key data: 400 mm, 1000 mm

Buzuluk 14231 CE conversion in 2010 Antifriction bearing Motor: 55 kW Motorized NIP adjustment Baseplate

3 to 5-Roll calender Buzuluk Number of rolls: 4 pcs. Roll diameter: 150 mm Roll length: 400 mm

Key data: 560 , 1500

Mixing mill 560 x 1500 mm Buzuluk Type 14203 Roller bearing Motor: 132 kW Motorized NIP adjustment

rear roll 560x1500 for mixing mill Buzuluk 14823

front roll 560x1500 for mixing mill Buzuluk 14823

Guided from bronze Drawing No. 05714 -227D1

Knife Drawing No. 05714-223C1

Break

Covers for bull gear and friction wheels

Drive 210 kW / 985 rpm, 380 V, with starter

Pinion Drawing No. 14821- 167 C9 z = 23

Pinion Drwaing No. 14272 - 167 C1 z=20

Bull gear Drawing No. 14272 -161 C1 z = 113

Gearbox TSA 031 370-1-07 Manufacturer VSS Kosice for mixing mill Buzuluk 660x2100 mm , Type 14821 for right side i = 10:1

Seal Drawing No. 14430-2824C2

Seal Drawing No. 14430-2818C2

Seal Drawing No. 14430-2815C2

Bull gear z=82

Pinion Drawing No. 14240-113 z=26

Bull gear

NIP adjustment screw with more grooves

NIP adjustment screw Drawing No. 14204-1168D1

Key data: 300 , 600

Rollers: dia. 300 x 600 mm Roll surface: smooth Rollers type: hollow bored NIP adjustment: Manuel Engine: 22 kW

Screw (small) Drawing no. 14203-461D1

Worm gear (small) Drawing no. 14240-546D1

NIP adjustment screw Drawing no. 14240-517