Recycling machinery for plastics used for sale (10)

used screening machine, function-tested, immediately available

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...

Cardboard Chuck Cutter - Brand: Llorens Planas - Model: CORE SLIT - Reference: ME-16-2-3 - 1,600 mm - Power: 0.5 hp (0.37 kw) - Year: 2007

Recycling plant/recycling plant General information • Plant type: PET sorting and washing system for the production of PET flakes • Manufacturer: STF-Maschinen & Anlagenbau GmbH • Year of construction: 2023 • New value EUR 4,970,000.00 • Market value (at location): EUR 3,052,000.00 • Installed in two connected halls incl. foundations • Plant currently not in operation (standstill since 11/2024) Technical key data • Max. configuration: 2,000 kg/h • Max. achievable output in continuous operation: 600 kg/h • Output in test run with good material: >1,500 kg/h • Energy requirement: 650-680 kWh (without hot washing system) Stages of the procedure 1. Feeding of PET material (pressed bales) 2. Coarse sorting via sieve drum 3. Magnetic separation of metallic impurities 4. 2-stage sensor sorting (materials) 5. Manual sorting via sorting belt 6. Mill and  ...

SCREW : 100MM MOTOR : 45 KW REDUCER : ZLY250 SPEED : 250 250KGS/HOUR REMARKS : 1)WOODEN CASE PACKAGE 2)NOT INCLUDE INSTALLATION COST 3)SINGLE SCREW EXTRUDER (1 PCS) 4)MOULD (1 PCS) 5)COOLING FLUME (1 PCS) 6)DRY MACHINE (1 UNI) 7)ELECTRICAL CHANGE NET SYSTEM (1 UNI) 8)PELLETIZER (1 UNI) 9) high temperature wire (FOC 30 m) Pelletizing Auto Pusher + Conveyor #1

Complete Britas filter with many spare parts. Off site, available immediately.

Grinder mill with blades Brand: Mateu I Solé, model: B-40, cutting chamber: 710x520 mm, motor: 30 KW (40 HP). Stepped rotor, flywheel, Without vacuum cleaner. With electrical panel.

Optical separator, Brand: Ecorema, Model: Aisorter X-1200, Year: 2020, Power: 4500 W

Chip press for the recycling and compaction of plastic chips (which are shredded if necessary) from machining by converting them into cylindrical briquettes. When it comes to disposing of PU or EPS chips, the Styrotec briquetting press saves a lot of money and increases profits by turning waste into a resource. The chip press can be installed both indoors and outdoors. Briquette diameter: 55 mm Hopper dimensions (diameter): 1000 mm Throughput: 30-75 kg/h Motor pump power: 5.5 kW Dimensions of the briquetting press: 1,100 x 1,460 x 1,600 mm Weight: 565 kg