other machines for plastic used for sale (576)

Mobile vacuum station for use on a degassing opening on the extruder or tool as well as for support in vacuum profile forming - a water ring vacuum pump VG-55 mounted on a welded and painted steel base frame with maximum vacuum Volume of 55m3/h, with kpl. connected supply and cooling system - Vacuum connection: 1x connection pipe with internal thread R1" or GEKA coupling and hydraulic hose 2TE DN25 length 700mm - a VA service water separator and storage tank with fresh water connection R1/2", level switch and drain tap for easier daily cleanse - a cooling coil built into the separation tank and removable cooling coil made of hde-ribbed tube - Water drain on water tank: R1 1/4" - Cooling water connection to cooling coil: R3/8" - an additional vacuum separation container made of steel (hot-dip galvanized) in front of a vacuum pump for separation (diffusion) of the  ...

PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW

- 5 aluminium silos with attachment filter incl. discharge screw with slide made of V2A - 4 aluminium silos for manual filling with discharge screws - 3 dosing scales - Optional with dust filter

Stock - No.: 1820 1 used, overhauled CUBE DICER as type Sagitta - LANCELIN BG 200 working width 200 mm drive 7,5 kW – NEW cutting tools 4 x 4 x 3 mm cube pellets incl. pneumatic infeed roller system More pelletizing equipment ex our stock Wuppertal Germany available, Ask for our most recent stock-list or visit us

Stock - No.: 1624 1 piece used strand pelletizer PREVIERO > adjustable cutting length type TA 200 NA year 1996 – partly overhauled in 2020 drive 4 kW + 0,37 kW 200 mm cutting width new control board FU controller We have more strand-pelletizers, waterring or underwater pelletizing units available ex stock Wuppertal Germany, You´re welcome to visit us. Please find our stock-list on the Homepage: plastictrading

No.: 2324 1 used strand-pelletizer Alphatec type AS-G 200 E year 2019, very good condition - lab / demo use only working width: 200 mm drive 7,5 KW – AC frequency controlled cutting rotor with hard-metal teeth pneumaticm pressure roller device Machine is ready for demo. More strand-pelletizer ex our Stock available: Scheer, Automatik, Rieter, IPS, AlphaTec, Pelltec, .. Our actual machine stock-list you can find on our Homepage: plasticotrading.de

According to the description below

Technical details: Plate length: 3,000-1.250 mm Plate width: 1,250-1,000 mm Plate thickness: 40-250 mm including separation, stacking incl. div. milling pictures incl. documentation last usage: 2015

Mouldingpresse The MP / 3E is a hydraulic press for the production of Clayprofilen such as rubber seals, protective, decorative or chrome strips. By inserting an appropriate form template in the bolt head, almost any profile can be produced up to a diameter of 65 mm. Manufacturer: Wadhwa Type: MP / 3 p Year of construction: 1995 Temperature controller Speed controller Via a rotary control a stepless adjustment of the speed is possible heated sealing head The built-in heater in the bolt head is adjustable Foot switch Weight: 125 kg Fully functional All information without guarantee Sold only to businesses

Various MAAG pump E.g. Extrex 90, 70, 56, and 36 Reconditioned available from stock in Wuppertal. more details on request

According to the description below

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

Milling Centre for EPS foams may be also applicable for other foams such as XPS, PUR, or other applications after conversion Platen length: 1000-1250 mm Plate thickness: 500-1250 mm Plate thickness: 40-250 mm including input and output; Unloading and stacking the plates stack Documents are available. A visit is possible after agreement at any time. Other machines and components for the production and processing of foams are available.

Plate press - table press - Laboratory Press - Universal Press MHSP522 Press area 230 230 mm Clear width 200 mm Manual drive with worm gear screw jacks 5 KN Pressure 5 KN (0.5 tons) Weight 55 kg Per sensor revolution 0.5 mm path, this little manual force with great force, very fine deliverable. Pressing force is long maintained by self-locking.

According to the description below

According to the description below

Sample punch for specimen DIN 527-2 mm. suitable for elastomers, paper, cardboard and foil. NEW.

vertical smoothing unit, 900 mm 3 rollers, D = 355 mm 40 m/min pneumatic delivery of the rollers with cooling rollers, trimming station, extractor and chassis

complete "package" with perforated disc, siebronde, nozzle plate we also supply new nozzle plates according to your requirements Monofilament systems on request and specification

- Brand: SANT ANDREA - Model: G30/1000 - Cutting chamber: 1000 x 750 mm - Year of manufacture: 2000 - No motor or electrical panel - Blade width: 50 mm

MF-0170 4-Axis Ripper - Brand: Weima - Model: ZM30 - Year: 2000 - Two motors of 11 KW each (15 hp) - Cutting chamber: 600 x 462

- Brand: PURIPLASTIC - Model: NG.320 - Spindle diameter: 320 mm - Spindle speed: 63 rpm - Main engine power: 180 hp (132 KW) - Cut-off: 4 HP (3 KW) - Electrical panel

MD-0107 Overhead Cut to Water - Brand: BAUSANO - Model: TDF-500 - Year: 2015 - With 1.5 meter centrifuge - Made of stainless steel - 5.5 hp (4kw) - With water bath and electrical panel

GT-5407 Knife Sharpening Machine - Brand: HOLZ MANN - 1 meter - Auto-scroll - Manual lowering - Power: 2HP (1 kW)

GT-5382 Corrugator for Pipe - Brand: ITIB - 1.85 m long with chain sets of: - 21 Ø 2 mm Separ - 25 Ø 2 mm Separ - 25 Ø 3 mm Separ

GT-5322 2-Axis Ripper - Brand: JBF - Model: DC 50/40 - Cutting chamber: 500 x 400 mm - Motor: 9.2 KW - Year of manufacture: 2015 - With 2.70 x 0.35 feed conveyor

- For plastic, - Brand: Falzoni, - Model: FBP600, - Engine: 30 kW (40 hp). - Tank: 250 L. - Vacuum cleaner for steam extraction 0.5 Kw (0.75 hp). - With electrical panel.

GT-5290 Ripper - Brand: SCOINER - Model: 150/1300/100 - With horizontal hydraulic pusher and vertical hydraulic pusher - Rotor length: 1450 - Diameter: 500 - Engine: 100 hp (75 kw) - Dice: 30x30 - With hopper - With electric control - Year: 2000

- Brand: SILMISA - With hydraulic pusher - Model No.: MSA.30.126 - Year: 2008 - Power: 75 hp (55 KW) - Cutting chamber: 1260 x 900 - Blade: 40 x 40 mm - With electric panel

Output Capacity: 200 kg/h // Rotor Diameter: 252 mm