other machines for plastic used for sale (394)

Deze trekwerk zaag van ons gerenommeerde merk SICA S.p.a. staat bij Plastima Used Machinery in de machine opslag. De zaag komt uit 2003 en verkeert in gebruikte, maar goede staat. Brand: SICA S.p.A. Bwo Ud Dvstphp Ioycew Model: TRS/U 110-800 Year of construction: 2003 Power: 5.5 kW Pipe outer diameter max: 110 up to 800 mm

Voltage 380 V Power 3 kW Pipe Ø min. 63 mm Pipe Ø max. 400 mm Dimensions (LxWxH) 4400 x 1600 x 2600 Mm Weight 1580 kG Including universal clamps Be Udevlxt Ue Dvycjww

Brand: Rollepaal Pipe Extrusion Technology B.V. Model: RSV 8/1 Year of construction: 2005 Pipe outer diameter max: 8 mm Cooling length: 1000 mm Spray pump: 2.2 kW

This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm

This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Make: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm

This cooling tank from Primac is in machine storage at Plastima Used Machinery. The Cooling Tank is from 1994 and is in great condition. - Brand: Primac - Model: CV.2C. 125/6 - Pipe diameter max: 125 mm - Cooling length: 6000 mm - Year of construction: 1994

This Haul-Off machine from IPM is in the machine storage at Plastima Used Machinery. The pull bench is from 2005 and is in good condition. – Brand: IPM – Model: Haul-Off TR 400/6 – Year built: 2005 – Voltage: 400 V – Power: 10.94 kW – Pipe diameter max: 63 – 400 Ø (mm) – Additional info: Reinforced model for heavy pipes

This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm

Year: 2002 New-exhibition machine, never used in production. - flash limit: 0,8 – 2 mm - angle range 30-180 degrees - maximum welding height: 200 mm - maximum welding width: 215 mm (at 90°)

Year: 2002 New-exhibition machine, never used in production. - option to use up to 4 heads - top and bottom mortising - automatic operating cycle; easy adjustment of milling depth and height

Year: 2006 - technically efficient, ready to work – after full service - flash limit: 0.2 – 2 mm - maximum welding dimension: 3000 mm - support path - programmable PLC controller - automatic welding process

Year: 1999 - technically efficient, ready to work – after full service - for the upper and lower hinge - centering the element - SPS control

Plastic processing machine manufactured in 2022. This Other AMIS GSE 300/600 features a rotor diameter of 300 mm and a rotor width of 600 mm, designed for high-speed recycling of plastic waste. It has a feed opening of 400 x 590 mm and a throughput rate of approximately 150 – 250 kg/h, depending on material type. If you are looking to get high-quality plastic recycling capabilities, consider the Other AMIS GSE 300/600 machine we have for sale. Contact us for further details.

Year: 2002 New-exhibition machine, never used in production. - handle function - copying template - pneumatic profile mounting - centering device

Year: 2002 New-exhibition machine, never used in production. - 3 motors - pneumatic profile clamping - adjustable milling length

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 500 mm - max. cutting length: 3000 mm - hydropneumatic feed - vertical and horizontal pneumatic profile mounting

Year: 2007 - technically efficient, ready to work - after full service - pneumatically operated rotary table -90°/0°/+90° - working range: 200 x 240 x 2500 mm - 4 kW motor - speed ​​control (inverter) - 2 electronic position indicators - pneumatic profile clamping - cooling and lubrication system - copying template

Calender

- technically efficient, ready to work – after full service - adjustable leg height - working length: 3500 mm - roller width: 240 mm

- technically efficient, ready to work – after full service - adjustable leg height - working length: 3500 mm - roller width: 240 mm - measurement reading scale - manually adjustable stop + locking lever

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

Year: 2006 - technically efficient, ready to work – after full service - screwdriver - automatic screw feeding system - tilting table top - fittings punch (straight cut)

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

Year: 2014 - technically efficient, ready to work – after full service - motor: 2 x 0.75 kW - pneumatic clamping of the strips - discs with undercutting cutters (2 x 250 mm, 2 x 150 mm) - glass simulator – lateral strip support – stepless (adjustable with a crank and counter) adjustment of the simulator position - manual height adjustment of the work table

Year: 2015 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (retaining and pressing) - through-feed - adjustable height: 500 mm (liftable) - adjustable vertical angle from 0 to 7 degrees - working width: 3500 mm

ECONOMOS IP 4000 Seal Jet CNC lathe for seal production was built in 2000 in Austria by ECONOMOS AUSTRIA Gesellschaft m.b.H. The machine is designed for the production of technical gaskets and sealing elements of various dimensions and profiles. The advanced SEAL-JET technology enables the rapid production of both single parts and short series with high dimensional accuracy and repeatability. The ECONOMOS ECONOM IP 4000 Seal Jet lathe for gasket production is distinguished by its sturdy, welded design with integrated chip trough. Machining is performed by a main spindle rotating at a maximum speed of 3000 rpm. The spindle, guided in precision bearings and encased in a rigid grey cast iron body, ensures high machining stability even under heavy loads. The integrated cooling system effectively dissipates the heat generated during machining, maintaining optimum working conditions through ...

Year: 2006 - technically efficient, ready to work – after full service - flash limit: 2 mm - angle range: 30-180 degrees - large heater - side supports - air preparation station

WEGENER BM 301 plastic bending machine was built in Germany by Wegener International GmbH. The machine was regularly maintained and upgraded throughout its service life. In 2022, a general overhaul was carried out at the machine manufacturer. WEGENER BM 301 is the perfect choice for precision forming of thermoplastic sheets made of, among others, PVC, PC/ABS and PMMA with a maximum thickness of 15 mm and a width of 3050 mm. The machining process is performed by means of heating elements in the form of a lower flat strip and an upper V-shaped strip, which heat the material at a controlled temperature to a plastic state. The material is then bent to the desired angle between 0° and 110°. The use of the highest-quality heating elements ensures efficient and even heating of the material along the bending line. They are moved manually along hardened steel rollers. Repeatable positioni ...

Used SJ 50/30 filament production line equipped with an air-cooled head. Technical parameters: - screw diameter 55 mm - L/D 30, effective screw length 1500 mm - Screw rotation speed: 60 rpm - forced feed unit for raw material to the plasticizing system with a power of 1.5 kW / vertical screw system with cylinder . - Main drive motor power 12 kW - capacity approx. 50 kg/h Heating sections and power : - Cylinder 6 kW / three heating sections plus head - Head connector / mechanical screen exchanger with a power of 2 kW - Air cooling of the cylinder and head / motor with a power of 0.18 kW - Raw material: PP/PE ABS/PLA/PETG plastics Weight approx. 800 kg.

Used plasticizing system, diameter 120 mm. Technical parameters: - screw diameter 120 mm - barrel diameter 120 mm L/D 33 mm - 6 heating sections/heaters with a power output of 4300 W - complete set of fans with housings - double degassing section - complete power supply for heaters and fans. The plasticizing system is in good condition, with a capacity of approximately 400 kg/h.